West Bengal State Electricity Distribution Company Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Civil And Construction
Eprocure
Opening Date20 Jan 2025
Closing Date10 Feb 2025
Tender Amount₹ 1,76,24,631
Costs
EMD
₹ 3,52,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Control Room Building, Equipment Foundation, Switchyard Development, Retaining Wall, Boundary Wall, Culvert, Fencing Wall, Approach Road And Sinking Of 1 No Tube Well (100mmx50mm) Dia Including Submersible Pump Motor 1.5 Hp At Propose
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBSED_801671_1Tender No
RM/MRO/CIVIL/e-TENDER/ 2024-25/03Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS6313 (part -II) 1981. (Mode of measurment will be per Sq.m of plan area of plinth treated.) (PWD schedule Page 6 item-10(c))
200
111
22218
... More
Filling in foundation or plinth by silver sand in layer not exceeding 150mm. as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand. PWD Schedule Item no-04(A). Pg-02
140
435
60986.8
... More
Single brick flat soling of picked jhama bricks including removing & dressing bed to proper level & filling joints with powered earth or local sand. 3rd Corri, Item no-01, p-1
1800
325
585396
... More
Supplying and laying Polythene Sheet (150gm / SQM.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. (PWD schedule Page 47 item-3)
200
24
4848
... More
Cement concrete with graded stone ballast (40mm size excluding shuttering). In ground floor. Pakur variety. 1:3:6 proportion. 3rd Corri, Item no-22, p-18
138
4382
604769.82
... More
Ordinary Cement Concrete (mix 1: 2: 4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur variety. Analysed Rate
115
5061
582092.05
... More
Ordinary Cement Concrete (mix 1: 1.5: 3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur variety. Analysed Rate
508
5644
2867583.8
... More
In 1st floor
2
5740
11481.6
... More
Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades. (PWD schedule Page 45 item-9)
20
120
2403.8
... More
Hire & labour charges of shuttering with centering & necessary staging up to 4m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing & striking out after completion of work up to roof of ground floor. a) 25mm to 30mm thick shuttering without staging in foundation. PWD Schedule Item no-36(f), Pg-43
1445
207
299187.25
... More
c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work. i) Up to the roof of Ground floor. PWD Schedule Item no-36(c), Pg-43
2900
366
1063227
... More
ii) 1st floor. PWD Schedule Item no-36(d/i), Pg-42
22
384
8465.82
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary,) cutting to requisite length, hooking & bending to correct shape, placing in proper position & binding with 16 gauge black annealed wire at every inter section complete as per drawing and direction. i) For work in foundation & upto roof of ground floor/upto 4m. Mild steel/Tor steel. JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL 10th corri , Item no-40
54
64885
3503813.22
... More
ii)Beyond the roof ground floor but upto roof of 1st floor(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL ) 10th Corri & PWD Schedule Item no-40(b/i) , Pg-44
0.4
65370
26148.09
... More
Brick work with 1st class bricks in cement mortar (1:6). i) In Foundation & Plinth. 3rd Corri, Item no-08(a), p-2
212
4968
1053256.28
... More
ii) In super structure ground floor. 3rd Corri, Item no-08(b), p-2
58
5193
301218.36
... More
125mm thick brick work with 1st class bricks in cement mortar (4:1). i) In super structure ground floor. 3rd Corri, Item no-16, p-3
515
682
351621.4
... More
Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety 30mm thick. 3rd corri Pg-37, Item no-46
190
505
95950
... More
Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, iron butt hinges and M.S clamps. With SAL (Siliguri). PWD Schedule Item no-01(c), Pg-114
0.2
85959
17191.82
... More
Supplying, fitting and fixing M.S clamp for door and window frame made of flat, bent bars, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. (Cost of the concrete will be paid separately). 40 mm X 6 mm, 200 mm length. PWD Schedule Item no-04(b),Pg-140
32
25
808
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100 mm X 75 mm X 3.50 mm. PWD Schedule Item no-05(viii),Pg-140
16
66
1066.56
... More
Iron hasp bolt of approved quality fitted and fixed complete (oxidized) with 16 mm dia rod with centre bolt and round fitting. 250 mm long. PWD Schedule Item no-10(i/b),Pg-142
4
160
642.36
... More
Anodized aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws. 225 mm long X 12 mm dia bolt. PWD Schedule Item no-26(viii), Pg-144
4
115
460.56
... More
Anodized alluminium ‘D’ type handle of approved quality manufactured from extruded section conforming to I.S specification (IS: 230/72) fitted and fixed complete. With continuous plate base (hexagonal/ round rod). 125mm. grip x 12mm. dia rod. PWD Schedule Item no-30a(v), Pg-146
4
104
416.12
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of Top & Bottom Rails and side styles of well seasoned timber 65mm. wide each and the entire frame fitted with 37.5mm. wide battens, placed both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete including fitting and fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 35 mm thick shutters (single leaf). i) Gr. Floor PWD Schedule Item no-11(a), Pg-124
8.5
2685
22827.52
... More
25 mm. thick damp proof coarse with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency] Corri-03, Pg-22, Item no-02
20
253
5070.2
... More
Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface by chipping etc. including throating, nosing and drip course where necessary. Excluding cost of chipping over concrete surface. In ground floor. i) 20 mm thick plaster with (1:6) cement mortar. 3rd Corri, Item no-01(i/b), Pg-50
310
164
51035.3
... More
ii) 15 mm thick plaster with (1:6) cement mortar. 3rd Corri, Item no-01(i/c), Pg-50
2175
143
311938.5
... More
iii) 10 mm thick plaster with (1:4) cement mortar. 3rd Corri, Item no-01(ii/c), Pg-50
1810
128
232168.7
... More
In 1st floor. i) 20 mm thick plaster with (1:6) cement mortar. 3rd Corri, Item no-01(i/b), Pg-50 & Item no-01, Pg-193
65
168
10963.55
... More
In 1st floor. ii) 15 mm thick plaster with (1:6) cement mortar. 3rd Corri, Item no-01(i/c), Pg-50 & Item no-01, Pg-193
80
147
11796.8
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) (PWD schedule Page 198 item-5.i)
580
123
71467.6
... More
Labour for Chipping of concrete surface before taking up Plastering work. PWD Schedule Item no-01, Pg-192
500
21
10605
... More
Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. PWD Schedule Item no-15, Pg-192
2080
34
71427.2
... More
Applying Inerior grade Acrylic Primer of approved quality and brand on plaster or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One coat. Water based interior grade Acrylic Primer. In Ground Floor. PWD Schedule Item no-07(a/i), Pg-195
580
31
18043.8
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Standard Quality.PWD Schedule Item no-04, Pg-201
580
62
36319.6
... More
Applying exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative texture (matt finish) or smooth finish Acrylic exterior emulsion paint including scrapping and preparing the surface thoroughly, complete as per manufacturer’s specification and as per direction of the EI. Water based interior grade Acrylic Primer. One coat. i) In ground floor. PWD Schedule Item no-08(a), Pg-196
1730
31
54858.3
... More
ii) In 1st floor PWD Schedule Item no-08(a), Pg-196 & Item no--01, Pg-198
145
32
4702.35
... More
Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rates includes cost of materials labour, scaffolding and all incidental charges but excluding the cost of primer. Two coats. Normal Acrylic Emulsion. In ground floor. PWD Schedule Item no-17(a), Pg-197
1730
67
117069.1
... More
ii) In 1st floor PWD Schedule Item no-17(a), Pg-197 & Item no--01, Pg-198
145
68
9915.1
... More
Supplying 125 mm long acrylic handle for aluminium door as per approved make and brand. A) natural colour. PWD Schedule Item no.13(B/a), Pg-244
8
182
1462.48
... More
Supplying 4 lever mortice lock of any approved make and brand as per direction of Engineer-in Charge. 100mm PWD Schedule Item no.12(ii), Pg-243
4
214
856.48
... More
Supplying EPDM gasket of approved make and brand as per direction of Engineer-in charge. b) 'U' shapeppd EPDM gasket for frames. PWD Schedule Item no.08(b), Pg-242
115
15
1742.25
... More
c) Weather gasket/ wool pile for door vertical. PWD Schedule Item no.08(iii), Pg-242
36
19
690.84
... More
Supplying profiles of required section made of Aluminium alloy extrusions conforming to IS:732-1983 and IS:1285-1975, anodized (with required film thickness and specified colour/ natural) matt finished conforming to IS:1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/ certified make and brand as per direction of E-in-Charge. A) In 10-12 micron thickness annodizing film. Natural white Movable door shutter. i) Door frame (Top & sides) PWD Schedule Item no. 01(I/k/i),Pg-234
35
318
11135.25
... More
ii) Shutter a)Top rail PWD Schedule Item no. 01(k/ii),Pg-235
6
307
1842.24
... More
b) Bottom rail PWD Schedule Item no. 01(k/ii),Pg-235
6
452
2714.88
... More
c) Lock Rail PWD Schedule Item no. 01(k/ii),Pg-235
6
380
2284.62
... More
d) Door vertical PWD Schedule Item no. 01(k/ii),Pg-235
36
335
12071.52
... More
e) Glazing clip PWD Schedule Item no. 01(k/ii),Pg-235
230
50
11615
... More
Labour charge for fabrication & installation of composite door, window, partitions made from annodlized extruded alloy aluminium sections for the following units :-(B) (i)parly glazed and partly panelled or fully glazed made from annodized extruded alloy aluminum sections fabrications to masonry wall including cutting to proper shape and size, drilling and allining, fitted with heavy duty hydraulic action floor spring placed in the floor with mending damaged, with top pin assembly of approved make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fitings, fixing, adhesive and joineries cutting glass of approved make to requisite shape and size fitting with dry steneoprene/EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of E-I-Charge. (The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleate angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, lockng arrangements, weather gasketing/ wood pile, floor spring, top pin, handle, tower bolt, glazing clips etc. For double leaf swing door i) In ground floor PWD Schedule Item no.02(B), Pg-239
17
1358
23094.5
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 4 mm thick clear glass. PWD Schedule Item no-09(i), Pg-243
42
401
16883.16
... More
i) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. PWD schedule Item no-01(b), Pg-200
26
38
997.88
... More
ii) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. PWD schedule Item no-01(a), Pg-200
540
29
15816.6
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. a) On timber or plastered surface. With super gloss (hi-gloss). Two coats (with any shade except white). PWD Schedule Item no-2(a/iv), Pg-200
26
81
2127.06
... More
b) On steel or other metal surface. With super gloss (hi-gloss). Two coats (with any shade except white). PWD Schedule Item no-2(b/iv), Pg-201
540
79
43086.6
... More
Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floors etc. cutting trances in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) i) UPVC pipe, 110mm dia. PWD Schedule Item no-21(A/ii), Pg-213
45
253
11407.95
... More
B) UPVC Fittings i) Plain Tee, 110mm dia. PWD Schedule Item no-21(B/a/ii), Pg-213
10
173
1737.2
... More
iii) Bend 87.5 degree, 110mm dia.PWD Schedule Item no-21(B/c/ii), Pg-213
10
141
1414
... More
iv) Shoe, 110mm dia. PWD Schedule Item no-21(B/d/ii), Pg-213
10
112
1121.1
... More
Supplying, fitting & fixing fan hook for ceiling with 1.0 metre long 16 mm dia rod complete including mending damages. PWD schedule Item no-30, Pg-40
10
101
1010
... More
Supplying, fitting and fixing C.I. square jalli. 100 mm. PWD Schedule Item no-19, Pg-67, S&P
10
73
737.3
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (a) Fixed type steel windows as per IS sizes with horizontal glazing bars. PWD Schedule Item no-20(a), Pg-107 & 3rd corrigenda P-93
14
1523
21323.12
... More
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] PWD Schedule Item no-20(b), Pg-107 & 3rd corrigenda P-93
28
2220
62187.72
... More
MS integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with MS flats and bars. Ground floor
(PWD schedule Page 108 item- 20,viii)
520
95
49894
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 iii) 5mm thick clear glass. (PWD schedule Page 243,item- 9,(iii)
15
531
7968.9
... More
Two point nose steel handle including fitting and fixing. PWD Schedule Item no-20(c/iv), Pg-108 & 3rd Corrigenda P-94
32
50
1616
... More
Steel peg stay 300 mm long including fitting and fixing. PWD Schedule Item no-20(c/vi), Pg-108 & 3rd Corrigenda P-94
32
35
1131.2
... More
M.S. Structual works in columns, beams, chequered plate etc. with simple rolled structural members (e.g.Joists, angles, channel sections conforming to IS:226, IS:808 & SP(6)-1964 connected to one another with brackets, gussets, cleats as per design, direction of E-in-Charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS:816-1956 & IS:1955 using electrodes of approved make and brand conforming to IS:814-1957, haulage, hoisting and erection all complete. The cost includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work required including all incidental charges such as electricity charges, labour insurance charges etc. For structural members of specified sections weighing less than 22.5Kg/m (Payment will be made as per the schedule) PWD Schedule 3rd Corri, Item no-01(I), P-84
12.7
73329
931278.68
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 25 mm. thick. PWD Schedule Item no-06(ii), p-48
2
251
502.98
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. PWD Schedule Item no-15, p-105 & 3rd Corri P-91
14
1333
18664.8
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety (JSW/JSP/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL). PWD Schedule Item no:01 Pg-87, 2nd corri-Pg-01
1
6740
6740.74
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. ii) For 20 users. With Pakur variety. (JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL) PWD Schedule Item no:03 Pg-88, 2nd corri-Pg-09
1
46065
46065.09
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. For-(JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL PWD Schedule Item no:04 Pg-89, 2nd corri-Pg-09
1
15657
15657.02
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and ranite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana.Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m. PWD Schedule Item no. 22 Pg-55 & corri Pg-27
25
1698
42470.5
... More
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone
properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and
polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m] (PWD schedule Page 54 item- 20 and 3rd corrigendum pg-06)
152
1163
176855.04
... More
Supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 Nos. of key stones (10mm.) fixed with araldite at the back of each tile and finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall: with sand cement mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. Area of each tile upto 0.09 Sq.m. Colour decorative.PWD Schedule Item no. 35 Pg-64 & 3rd Corri Pg-36
90
753
67811.4
... More
Floor: With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/ Sq.m Area of each tile upto 0.09 Sq.m. Colour decorative. PWD Schedule Item no. 35 Pg-64 & 3rd Corri Pg-35
18
747
13453.2
... More
Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap 100 mm PWD Schedule Item no. 14(A/iii) Pg-66
1
957
957.48
... More
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. PWD Schedule Pg-117 Item no-08
5
281
1408.95
... More
PVC door shutter-30mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete. In Ground Floor. PWD Schedule Pg-135, Item no-27
1.7
2148
3652.06
... More
Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required) Item no-08(b), Pg-45
220
259
57105.4
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety. 3rd corri. Item no-33, Pg-20
12
4542
54515.76
... More
Supplying, fitting and fixing shower of approved brand and make. Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model -Tropical / Sumthing Special of ESSCO or similar brand). PWD Schedule Item no-03(a/i), Pg-03, SP
1
456
456.52
... More
Supply, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg/ sq.cm. (For water lines only). i) 40 mm. PWD Schedule Item no-05(iv), Pg-05, SP
1
1605
1605.9
... More
ii) 25 mm. PWD Schedule Item no-05(vii), Pg-05, SP
1
785
785.78
... More
Supply, fitting and fixing bib cock or stop cock. i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model – Tropical/ Sumthing Special of ESSCO or similar brand). PWD Schedule Item no-07(a/i), Pg-06, SP
2
544
1088.78
... More
ii) Chromium plated Stop Cock (Equivalent to Code No. 513 (A) & 513 (B) & Model – Tropical/ Sumthing Special of ESSCO or similar brand). PWD Schedule Item no-07(b/i), Pg-06, SP
4
497
1991.72
... More
Supplying, fitting & fixing 10 litre PVC lowdown cistern conforming to IS: specification with PVC fittings complete with C.I. brackets including two coats of painting to bracket etc. PWD Schedule Item no-02, Pg-36, SP
1
1025
1025.15
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 1000 litre capacity PWD Schedule Item no-06(b), Pg-37, SP
1
5179
5179.28
... More
Labour for hoisting Plastic water storage tank. Up to 1500 litre capacity. Upto 1st story from G.L. PWD Schedule Item no-10(a), Pg-37, SP
1
96
96.96
... More
Labour for punching hole in plastic water storage tank up to 50 mm dia. PWD Schedule Item no-13, Pg-38, SP
4
19
76.76
... More
Supplying, fitting and fixing white vitreous chaina best quality approved make wash basin with CI brackets on 75 mm X 75 mm wooden blocks, CP waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm x 400mm size. PWD Schedule Item no-02(ii), Pg-48, SP
1
2230
2230.08
... More
Supply, fitting and fixing approved brand P.V.C CONNECTOR white flexible, with both ends coupling with heavy brass C.P nut, 15 mm dia. 750 mm long PWD Schedule Item no-09(iv), Pg-43, SP
3
118
354.51
... More
Supply, fitting and fixing approved brand 32 mm dia. P.V.C waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long. PWD Schedule Item no-10(iii), Pg-43, SP
2
75
151.5
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm PWD Schedule Item no-06(a/i), Pg-42, SP
1
3317
3317.85
... More
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm PWD Schedule Item no. 04 Pg-79
1
1629
1629.13
... More
Supplying, fitting & fixing Flat back Urinal (half stall in urinal) in white vitreous china ware of approved make in position with brass screws on 75 mm x 75mm x 75mm. wooden blocks complete. 635mm x 395mm x420mm. PWD Schedule Item no-6(i), Pg-80, SP
2
2897
5795.38
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) white PWD Schedule Item no-10(a/ii), Pg-81, SP
1
383
383.8
... More
Supplying, fitting & fixing 32 mm dia. flush pipe of approved make necessary fixing materials and clamps complete. Polythene Flush Pipe. PWD Schedule Item no-11(i), Pg-81, SP
1
156
156.55
... More
Supplying, fitting & fixing beveled edged mirror 5.5 mm thick silver red as per I.S. 3438-1965 together with brass C.P hinges. 600mm. x 450mm. PWD Schedule Item no-15(ii), Pg-81, SP
1
488
488.84
... More
Supplying, fitting and fixing soap holder. Fibre glass. PWD Schedule Item no-18(b), Pg-82, SP
1
58
58.58
... More
Supplying, fitting & fixing towel rail with two brackets. CP Over brass. 25 mm dia & 600 mm long. PWD Schedule Item no-22(a/ii), Pg-82, SP
1
434
434.3
... More
Supplying, fitting and fixing cast iron heavy type spiral staircase of approve design with 50 mm.dia. Stem and C.I. Steps 150 mm. As per design 900 mm. High C.I, railing including necessary M.S. tie of suitable section embaded ti wall with cement concrete (4:2:1) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete ( 6: 3:1) complete in all respect with all labour and materials.With 1200 mm well. 3rd Corri, Item no-21(a), Pg-95
4.1
5004
20518.66
... More
Collapsible gate with 40 mm X 40 mm X 6 mm tee as top and bottom guide rail 20 mm X 10 mm X 2 mm vertical channels 100 mm apart in fully stretched position 20 mm X 5 mm M.S flats as collapsible bracings properly riveted and washered including 38 mm steel roller including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc and making good damages complete. In ground floor. 3rd Corri, Item no-18, p-92
21
4394
92284.71
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PWD Schedule Item no-19(I/a), Pg-12, SP a)15mm.dia medium quality.
5
102
510.05
... More
b) 20mm.dia medium quality.
5
130
651.45
... More
c) 25mm.dia medium quality.
10
178
1787.7
... More
d) 40mm.dia medium quality.
45
294
13271.4
... More
(b) For Concealed Work PWD Schedule Item no-19(I/b), Pg-13, SP a) 15mm.dia medium quality.
2
138
276.74
... More
b) 20mm.dia medium quality.
2
159
319.16
... More
Labour for boring tube well of required dia by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting & fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. a) For depth upto 150m for 50mm dia tube well with top enlargement of 100mm dia. i) 50mm dia boring etc. PWD Schedule Item no-01(d/i), Pg-49
115
289
33335.05
... More
ii) 100mm dia boring etc. top enlargement. PWD Schedule Item no-01(d/ii), Pg-49
35
430
15059.1
... More
Supply of PVC pipes & fittings Schedule 80(medium duty) conforming to ASTMD - 1785 & threaded to match with GI pipes as per IS:1239 (PART - I) PVC pipes i) 50mm dia PWD Schedule Item no-19(III), Pg-13
133
284
37881.06
... More
ii) 100mm dia PWD Schedule Item no-19(III), Pg-14
35.15
882
31028.31
... More
Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (50 mm dia). PWD Schedule Item no-06, Pg-52
12
370
4448.04
... More
Supplying fitting & fixing steel cutter piece up to 450mm long with socket 50mm dia. PWD Schedule Item no-09, Pg-53
1
190
190.89
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution at work including hire and labour charges for tools and plants and sterilizing the equipment, paying all charges and fees, testing etc. complete in all respect as per direction. PWD Schedule Item no-23, Pg-55
1
1243
1243.31
... More
Supplying fitting & fixing 300mm housing clamp of approved quality. PWD Schedule Item no-27, Pg-56
2
2257
4514.7
... More
Providing 200 mm centre guide. i) With Clamp PWD Schedule Item no-28, Pg-56
1
129
129.28
... More
Washing & developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with ‘V’ notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect. PWD Schedule Item no-20, Pg-55
3
7613
22840.14
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete. (Note: Initial 6 M of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water). PWD Schedule Item no-24, Pg-55
2
2049
4098.58
... More
Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. PWD Schedule Item no-22, Pg-55
1
925
925.16
... More
Supplying, fitting and fixing heavy type bell mouth reducing socket.(i) 100mmx50mm PWD Schedule Item no-17, Pg-54
1
459
459.55
... More
Supplying, fitting and fixing G.I. cap at top. 100 mm PWD Schedule Item no-18, Pg-54
1
140
140.39
... More
Supplying fittings fixing submersible cable Finolex make I.S.I. size: 2.5sqmm Ref: PO. No: 5300307819
50
111
5555
... More
Supplying fittings & fixing KSB,Crompton Greaves or equivelent make submersible pump and motor set 1.5HP, with all necessary arrangements including loading unloading, transportation as per direction of engineer-in-charge (Payment will be made only after satisfactory performance of the pump & motor set for supply of water) Market Rate
1
15655
15655
... More
Supply & installation charges of control panel size 350x300x150mm complete with L&T make connectors 16 Amps. M.No. 2 over load relay with single phase preventor off and on switch, 3 nos. line fuse,3nos. Indicator lamps, volt meter, Push button, selector, switch Amp. meter with complete with all insurance Tax and duties etc. Market Rate
1
2777
2777.5
... More
Supplying, fitting & fixing G.I. pipes TATA make with all necessary accessories, specials viz. socket, bend tee union cross,elbow, nipple,long screw, reducing socket,reducing tee, short piece etc. fitted with holder bats clamps including cutting pipes, making threads fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. For exposed work. i) 100mm dia. medium quality. PWD Schedule Item no-01A/i(i), Pg-01
0.5
1043
521.67
... More
Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report. PWD Schedule Item no-29, Pg-56
1
8338
8338.56
... More
Supplying, fitting and fixing 600mm (+/-30mm) diameter R.B.T. concertina fencing on wall top using concertina coils stretched to approx 6mtr length at site clipped with 2nos. of horizontal R.B.T. strands which will be tensioned and fixed with the vertical MS angle iron posts by means of security fasteners (such as 'C' clips, R.B.T. clips etc.) (cost of posts will be paid separately) Item no-13, Pg-222
290
412
119500.3
... More
Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 5th corri, Item no-04, Pg-01
4
1330
5321.24
... More
Supply and carriage of 40mm crushed stone from nearest Rail yard and its spreading as per the instruction of the Engineer-in-charge. Analysed Rate
102
1659
169241.46
... More
M.S. gate of Jail type as per approved design made of strong M.S.frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor. Item no-16, P-105 & 3rd Corrigenda ,Pg-92
10
10261
102616
... More
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) (b) (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth. PWD Schedule Item no. 05(b/i) Pg-03
6250
383
2397625
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%