West Bengal State Electricity Distribution Company Limited Tender

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m including roof upto 150 mm thick. (P-10, I-2 BW)

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m including stacking of steel bars including roof. (P-10, I-3 BW)

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. (P-12, I-13 BW)

Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth (P-15, I-8 BW)

125 mm thick brick work with 1st class bricks in cement mortar (1:4) (P-16, I-16 BW)

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, as per relevant IS codes. Pakur variety. (P-26, I-10 BW)

Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor [Pakur Variety] 1:3:6 proportion (P-34, I-22 BW)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. (P-42, I-36 BW)

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Tor steel SAIL / TATA / RINL (P-43, I-40 BW)

MS structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For structural members of specified sections weighing less than 22.5 Kg./m (P-99, I-1 BW)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). With 1:6 cement mortar 15 mm thick plaster (P-189, I-1 BW)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. (P-192, I-15 BW)

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (P-200, I-1a BW)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white) (P-200, I-2b BW)

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS:1239 (Part - I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Exposed Work PVC Pipes (Dia) (P-12, I-19I S&PW)

50 mm

100 mm

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS:1239 (Part - I). (P-13, I-19III S&PW)

Elbow (Dia) 100 mm

Union (Dia) 50 mm

Reducing Socket (mm X mm) 100 X 50

Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc. from road side masonary drain / hume pipe drain / culvert etc. by mathor labour after removing concrete slab / manhole cover etc. without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc. by using iron pans, buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal / corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineer-in-Charge. (Payment will be made on the basis of actual stack measurment of spoils in dry condition at roadside)

Supplying, fitting and fixing 1 HP Sewage Submersible Dewatering Pump, Single Phase (220V) and delivery of 50 mm, complete in all respect as per direction of the Engineer-in-charge.