West Bengal State Electricity Distribution Company Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Civil And Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date4 Oct 2024
Closing Date11 Nov 2024
Tender Amount₹ 1,28,48,499
Costs
EMD
₹ 2,56,970Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Zm/slg/e-tender/2024-25/27 Date 27.09.2024
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WBSED_759064_1Bid Award Id
ViewTender No
ZM/SLG/e-Tender/2024-25/27 Dated 27.09.2024Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Depth of excavation for additional depth beyond 3000 mm. upto 4000mm. excluding cost of shoring as necessary.
50
11827
236.55
... More
Earthwork in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. i) With earth obtained from excavation of foundation.
250
19580
78.32
... More
ii) With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including the cost of carried earth.
2500
1240525
496.21
... More
Dismantling all types of masonry excepting cement concrete plain of reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor.
10
4514
451.47
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor.
10
9483
948.39
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. In ground floor.
6
11853
1975.56
... More
Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (a) Small plant of girth of exposed stem upto 75 mm. Lift upto 6 mtr
10
505
50.5
... More
Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance.
50
2858
57.17
... More
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
100
1919
19.19
... More
Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per
direction of Engineer in charge
60
10059
167.66
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made in measurement of finished quantity.)
150
78942
526.28
... More
(B) Do - by fine sand
20
15229
761.48
... More
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work).With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including cost of carried earth.
20
7672
383.62
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). For additional depth beyond 1.5 m. and upto 3.00 m
100
43329
433.29
... More
Bailing or pumping out water from foundation trenches.
500
10545
21.09
... More
Pre-Constructional Anti-termite measures: Anti termite treatement to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration ) with water by weight at the rate of 5 Litres per sq.m. of the surface before sand bed or sub-grade is laid.Holes upto 50 mm to 75 mm deep at 150 mm centre to centre both ways shall be made with 12 mm diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of IS-6313 (part-II) 1981.(mode of measurement will be per Sq. m of plan area of plinth area).
200
22220
111.1
... More
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.
1400
458136
327.24
... More
Ordinary Cement Concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor, as per relevant IS code. River bazree.
70
283224
4046.06
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. River Bazree i) In ground floor
200
958490
4792.45
... More
ii) In 1st floor.
5
24442
4888.4
... More
Cement concrete withgraded stone ballast (40 mm size excluding shuttering). In ground floor.With N.B. Variety stone metal. 1: 3: 6 proportion.
180
673750
3743.06
... More
Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm dia rod complete including mending damages. Payment for damage and repair to be made separately.
20
2020
101
... More
Hire and labour charges for shuttering with centering and necessary staging up to 4mtr. using approved stout, props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. a) 25mm to 30 mm thick wooden shuttering as per direction of Engineer – in- Charge. i) Ground Floor.
300
99384
331.28
... More
(b) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete worki) Ground Floor.
700
256641
366.63
... More
ii) In 1st floor
50
19240
384.81
... More
c) 25 mm to 30 mm shuttering without staging in foundation.
300
62115
207.05
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Tor steel. I) SAIL/ TATA/RINL. i) For works in foundation, basement and upto roof of ground floor / upto 4 m.
14
940338
67167.02
... More
ii) Reinforcement work beyond the roof of ground floor 1n 1st floor.
1
67601
67601.33
... More
II) JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL
0.5
32442
64885.43
... More
III) Other manufacturer not specified
0.5
31693
63386.59
... More
Brick work with 1st. class bricks in cement mortar. (1:6) a) In foundation and plinth.
50
247248
4944.96
... More
b) In superstructure, ground floor.
40
206807
5170.19
... More
c) In 1st floor.
10
52823
5282.3
... More
125mm. thick brick work with 1st. class bricks in cement mortar (4:1) in ground floor. a) In ground floor.
180
122533
680.74
... More
b) In 1 st floor.
20
13857
692.86
... More
Extra for using approved H.B netting in every third layer in 125mm thick brick work in any floor.
100
4141
41.41
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating nosing and drip course where necessary. i) With (1:6) cement mortar. b) 20 mm thick plaster. (Ground floor)
1500
243915
162.61
... More
d) 20 mm thick plaster. (1st floor).
100
16665
166.65
... More
ii) With (1:6) cement mortar. a) 15mm thick plaster. i) Ground floor.
1500
213615
142.41
... More
b) 1st Floor
100
14645
146.45
... More
iii)With 1:4 cement mortar a) 10 mm thick plaster. i) Ground floor
250
31815
127.26
... More
Neat cement punning above 1.5mm. thick in wall, dado, window sills, floor etc. (Note : Cement 0.152 cum. per 100 sqm.).
300
10302
34.34
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specificationand as per direction of the EIC. (In Ground Floor). One Coats. solvent based interior grade Acrylic Primer
1200
40848
34.04
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer’s specification and as per direction of the EIC. One coat. i) In ground floor
2000
63420
31.71
... More
ii) In 1st Floor
100
3243
32.43
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer’s specification and as per direction of EIC to be applied over acrylic primer as required. The rates includes cost of materials, labour, scaffolding and all incidental charges but excluding the cost of primer. Premium 100 % Acrylic Emulsion. i) In Ground Floor (Two coats)
2000
169680
84.84
... More
ii) In 1st Floor (Two coats)
100
8556
85.56
... More
Rendering the surface of wall and ceiling with white cement based Watre proof wall putty of approved make and brand (1.5 mm thick).
1200
147864
123.22
... More
A) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
50
1919
38.38
... More
B) Priming one coat on steel surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
300
8787
29.29
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. a) On timber or plastered surface. With other than hi-gloss of approved quality. Two coats (With any shade except white).
50
3787
75.75
... More
b)On steel or other metal surface. With other than hi-gloss of approved quality. Two coats (With any shade except white).
300
21816
72.72
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer). (Two coats). i) luxuryQuality
1200
84840
70.7
... More
Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)
200
51914
259.57
... More
Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement ( or at manufacturer's specified rate) for concrete of various grade.
200
24038
120.19
... More
Supplying and laying Polythene Sheet (150gm./ sqm.) over damp proof course or below flooring or roof terracing or in foundation trenches.
300
7272
24.24
... More
25mm thick damp proof course with cement concrete with stone chips (1:1.5:3) with graded stone aggregate 10 mm nominal size) and admixture of water proofing compound as per manufacturer’s specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately). (Chequering not required over concrete or painted surface).
20
4545
227.25
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
200
204424
1022.12
... More
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]
25
29643
1185.74
... More
Supplying, fitting and fixing Marble slab / Tile of 15 to 18 mm thickness in floor, loby, stair, landing & treads etc. over 20 mm (av.) thick base of cement mortar (1:2) laid with white cement slurry @ 4.4 Kg / Sq.m before placing marble & jointed with white cement slurry @ 2.0 Kg/Sq.m. with necessary pigments including grinding and granite polishing as per direction of Engineer-in-Charge. (White cement and pigment to be supplied by the Agency). With Makrana plain / pink / Adranga pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Blach Bhaslana. Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m.
50
84840
1696.8
... More
Area of each Slab/tile exceeding 0.60 sq.m but not exceeding 1.00 sq.m.
5
9650
1930.11
... More
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.
20
5211
260.58
... More
Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency] Area of each slab/tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m.
5
9079
1815.98
... More
Supplying, fitting and fixing 15 to 18 mm thick Marble slab / Tile in riser of step or skirting (upto 300 mm ht.) over 15 mm (av.) thick base of cement mortar (1:2) laid with white cement slurry @ 4.4 Kg / Sq.m at back side of marble & jointed with white cement slurry @ 2.2 Kg/Sq.m. with necessary pigments including grinding and granite polishing as per direction of Engineer-in-Charge. (White cement and pigment to be supplied by the Agency. With Makrana plain / pink / Adranga pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Blach Bhaslana. Area of each Slab/tile upto 0.3 sq.m.
10
16028
1602.87
... More
Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] Area of each slab upto 0.2 Sq.m.
5
8867
1773.56
... More
Supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing works & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. A) FloorWith sand cement mortar (1:4) 20 mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 Kg / Sq.m. & joint filling using white cement slurry @ 0.20 Kg / Sq.m. Area of each tile above 0.09 Sqm. i) Coloured decorative.
10
9120
912.03
... More
B) Wall With sand cement mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg / Sq.m. & joint filling using white cement slurry @ 0.20 Kg / Sq.m. Area of each tile above 0.09 Sqm i) coloured decorative.
40
44359
1108.98
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm x 600 mm x 10mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91 Kg / Sq.M. or using polymerized adhesdive (6mm thick layer applied directly over finished artificial stone floor / Mosaic etc. without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm. below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer’s specification and direction of Engineer-in-Charge. i) With application slurry @ 1.75 Kg / Sq.M., 20 mm sand cement mortar(1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 Kg / Sq.m. white cement for joint filling with pigment.
In Ground Floor A) Light colour.
30
38450
1281.69
... More
Supplying fitiing and fixing of acid and alkali reistant (johnson brand) tiles in position as per direction of EIC. Size 300mmx300mmx10mm thick.( as per order no: PM-I/RE/Siliguri/Civil/27-II/1067 dated 01.02.2007)
70
74270
1061.01
... More
Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]. 25 mm. thick (red variety).
80
37733
471.67
... More
Supplying and Laying in the specified pattern of Interlcoking Concrete Block Pavements (ICBP) with concrete blocks (with concerete grade as specified as per Table 1 of IS 15658: 2006) manufactured from BIS licensee manufacturer, with spacer nib (Small protruding profiles on vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per clause no 3.24 of IS : 15658) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per Cl. No. 3.3 of IS: 15658) as per Table no 2 of IS: 15658 with flexural strength/ breaking load as per Annexure G of IS 15658, on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per clause no 8.7 of IRC SP - 63 (2018) with proper confinement of bedding and joint filling sand, compaction, levelling and filling up of the edge gap.
(i) 60 mm thick, coloured decorative
150
167862
1119.08
... More
ii) Grey
50
49641
992.83
... More
iii) 80mm, coloured decorative
100
135037
1350.37
... More
iv) Grey
50
59792
1195.84
... More
Supplying & laying 25mm thick tiles of any shade of approved quality as per relevant IS Code IS; 1237-2012 laid in pattern as ditrected for foothpath, ramp , staircase of public building over 25 mm thick (Avg) cement mortar (1:3) & cement slurry @ 4.4 Kg/Sqm at back side of block.(Cement for mortar & slurry to be supplied by Department in all respect i.e. with all labour and material.(Border concrtete if necessary to be paid separately) Notye: Sub-grade CBR should not be less than 5. Cloured decorative.
10
6999
699.93
... More
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:-a) With 0.5 mm thick sheet
20
18099
904.96
... More
Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet to match with GCI Corrugation as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J" or "L" hook, bolts and nuts, limpet and bitumen washers and putty with 150mm end lap and one corrugation minimum side lap complete.a) 1.6mm +/- 0.2 mm thick sheet.(2.6Kg/Sq.m);i) Natural white or tinted blue colour
5
3752
750.43
... More
Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement@160 gms per sqm & both faces covered with thermo-fusible polyethylene film /Mineral on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point 150 deg C, Cold Flexibility -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)
50
20553
411.07
... More
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. For structural members of specified sections weighing less than 22.5 Kg./m.
1
75316
75316.71
... More
M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.
The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work.
Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. For trusses spoanning upto 12.00m
1
75669
75669.2
... More
M.S. or W.I. ornamental grill of approved design, joints continuously welded with M.S., W.I. flats and bars for windows, railing etc. fitted & fixed with necessary screws and lugs. The weight of grill per sq.m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same. Grill weighing above 16 Kg./sq.mtr and above. (i) Ground floor.
500
49625
99.25
... More
Collapsible gate with 40mm.x 40mm.x 6mm. tee as top & bottom guide rail, 20mm. x 10mm. x 2mm. vertical channels 100mm. apart in fully stretched position 20mm.x 5mm. M.S. flats as collapsible bracings properly rivetted and washered including 38mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. In ground floor. (Payment will be made on the area of the gate covered by the two guard rails and two extreme channels).
20
87890
4394.51
... More
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting. In ground floor or Chequered Plate.
25
254999
10199.99
... More
Locking arrangement for Jail type doors including supplying fitting and fixing in position complete as per approved design.
10
4130
413.09
... More
Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the Fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
5
16513
3302.7
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding lazing. (Add extra @ 1.2 % for each additional floors upto 4th floor and @1.5% for each addl. Floor above 4th floor.) Flash butt welded windows and ventilators. (a) Fixed type steel windows as per IS sizes with horizontal glazing bars.
20
30461
1523.08
... More
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
30
66629
2220.99
... More
(c) Fixed type ventilators as per I.S. sizes with horizontal glazing
bars height being limited to 580 mm.
10
1393
139.38
... More
(d) Centre hung ventilators as per I.S. sizes 580 mm.
5
2418
483.79
... More
(e) Two point nose steel handle including fitting and fixing.
40
2020
50.5
... More
(f) steel peg stay 300 mm long including fitting and fixing.
40
1414
35.35
... More
(g) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. Flats and bars.
30
2878
95.95
... More
Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. Payment to be made on vertical height in between 1st step and top platform. With 1200 mm. dia. well
7
35300
5042.93
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx).
2
18335
9167.77
... More
Welding in M.S. structural work with gas or electric: a) Tack weld
500
4545
9.09
... More
b) Continuous weld
800
7272
9.09
... More
Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame. Sal (Siliguri). (The quantum should be corrected upto three decimals).
0.5
41377
82755.36
... More
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.66 mm*90 mm.
10
5019
501.97
... More
Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. quare tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer’s specification and direction of Engineer-in-Charge.
5
1540
308.05
... More
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made).35mm thick shutters with 19mm thick panel of size 30 to 45 cm.Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
5
14084
2816.89
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.32 mm thick shutters (single leaf)
6
14295
2382.59
... More
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In all floor. 32 mm thick.
6
16743
2790.63
... More
PVC Door Shutter - 30 mm thick. Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mm x 25mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete.
5
10741
2148.27
... More
Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens).
In ground floor. 50mm x 25mm x 2.7mm x 2.7mm.
10
2393
239.37
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.250 mm long
2
321
160.59
... More
Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.250 mm long
2
1205
602.97
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 200mm Length
18
454
25.25
... More
(b) 40mm X 6mm, 125mm Length
18
363
20.2
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (a) 75mm. X 40mm. X 1.12mm.
12
339
28.28
... More
(b) 75mm. X 47mm. X 1.70mm.
12
375
31.31
... More
(c) 100mm. X 50mm. X 1.25mm.
12
521
43.43
... More
(d) 100mm. X 58mm. X 1.90mm.
12
569
47.47
... More
(a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers,including fitting and fixing complete.
1
1091
1091.81
... More
Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge. (a) 150 mm
2
763
381.78
... More
(b) 100 mm
2
428
214.12
... More
(c) 75 mm
2
317
158.57
... More
Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.Medium (I.S.I. size 2)
6
8277
1379.66
... More
Door stopper.(Brass)
12
1418
118.17
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204 / 74 fitted and fixed with cadmium plated screws.
i) 150 mm long x 10 mm dia bolt.
12
763
63.63
... More
Anodised aluminium Aldrop / sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. a) 250mm x 16mm dia bolt.
2
470
235.33
... More
b) 250mm x 19mm dia bolt.
10
2898
289.87
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws. a) 75 x 63 x 3.2 mm
20
1252
62.62
... More
b) 100 x 75 x 4.0 mm
36
3381
93.93
... More
Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. : 230 / 72) and fitted and fixed complete. With continuous plate base (hexagonal / round rod). 150 mm. grip x 10 mm. dia. rod.
8
783
97.97
... More
Anodised aluminium decorative handle (hexagonal / fluted) of approved quality fitted and fixed complete.
i) 150 mm plate x 10 mm dia rod x 12 mm hexagonal / fluted.
6
527
87.87
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) m height for external wall) .4mm thick.
5
2706
541.36
... More
Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessary clamps, nails including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bituminous/M-Seal etc.) complete. i) UPVC Pipes. 110 mm Dia.
50
12675
253.51
... More
ii) UPVC Fittings a) Bend 87.5 degree of 110 mm Dia.
10
1616
161.6
... More
b) Plain Tee of 110 mm Dia.
4
694
173.72
... More
c) Shoe of 110 mm Dia.
10
1121
112.11
... More
Supplying, fitting galvanized 2 ply 12 Gauge/4 points line of barbed wire in fencing (holes already made in the body of post ) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and lapping joints in the wire as necessary but excluding the cost of galvanized staples, straining bolts and binding wire as necessary 2 Ply 12 Gauge/4 Points (Payment to be made on the length of individual lines of wire).
1000
25080
25.08
... More
Supplying Glvanized Straining Bolts (With eye at one end with double nuts and washers fitted and fixed complete). 10mm dia -150mm.
400
17372
43.43
... More
Supplying Galvanized staples fitted and fixed complete. 19mm to 25mm size.
380
851
2.24
... More
Labour for fitting line of wire to posts, tightening by straining bolts and fixing the wire ( in taut condition) to the post with staples (including the cost of cutting and lapping joints in the wire, as
necessary and including the cost of staples and straining bolts and also the labour for fixing the staples but excluding the cost of straining bolts)
1500
4665
3.11
... More
Supplying gravels/ shingles of North Bengal Variety of sizes of 3.750 cm and stacking at site including cost of materials, carriage, loading, unloading all complete including all taxes and duties and incidental charges as per direction of Engg-in-charge including spreading of gravels.
40
44934
1123.37
... More
Labour for spreading of gravels/shingles around the sub-station structure in the switchyard premises in uniform thickness of upto 150 mm including carriage of materials from the stack as per direction of E.I.C.
400
11516
28.79
... More
Labour for collecting,washing and re- spreading of gravels/shingles around the sub-station structure in the switchyard premises in uniform thickness of upto 150 mm including carriage of materials from the stack as per direction of E.I.C.
500
28865
57.73
... More
Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.) (The rate is exclusive of the cost of posts)
250
103020
412.08
... More
Brick edging 75 mm wide with picked jhama bricks laid true to line and level including cutting necessary trench in soil or in hard metalled surface laying the bricks and repacking the trench (on both side of the edging) with posils and ramming the same thoroughly complete as per direction. Brick-on-end edging (250mm) depth.
40
3322
83.05
... More
Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circularnosing at top) (Nano kerb) of ement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.
5
4777
955.46
... More
Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.
6
10477
1746.29
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.i) 4mm thick clear glass.
20
8039
401.98
... More
(ii) 6mm thick clear glass.
10
6140
614.08
... More
iii) 12mm thick clear glass.
2
2541
1270.58
... More
Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand.Natural Colour
10
1828
182.81
... More
Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width. Ground Floor.
5
348
69.69
... More
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing film.Natural white.
For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr.and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg
per Mtr. and Interlock member @ 0.612 Kg per Mtr.
150
67872
452.48
... More
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to S:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door pring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door
closer, door stoper, handle, tower bolt and locking arrangment etc)
10-12 Micron thickness Annodizing film
Natural white (unit wt of to Top & side frame @1.366 kg/m ; top rail @ 1.296 kg/m; bottom rail @ 1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412 kg/m; glazing clip @ 0.167 kg/m. )
150
58327
388.85
... More
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium
fixed partition wall with glass / panel board all complete as per
architectural drawings and direction of Engineer-in-charge.
(Excluding cost of glass/ panel board,
10-12 Micron thickness Annodizing film.
Natural white. a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm. (unit wt of Top, bottom & side member @1.366 kg/m ; intermediate member @ 1.443 kg/m; glazing clip: 0.167 kg/m respectively)
50
19745
394.91
... More
b) For unsupported length of vertical member above 1.50m. height of both ends of vertical member restrained but panel above 0.90 sqm. (unit wt of Top, bottom & side member @ 1.978; intermediate member @ 2.055; glazing clip @ 0.167 kg/m respectively)
180
70356
390.87
... More
Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 -1990. Both side decorative laminate Interior Grade 9mm thick
10
8817
881.73
... More
Supplying, Aluminium Grill with F channel frame of approved make and brand having ultimate tensile strength of 19 Kg/Sq.m. and modulus of elasticity 7000 kg/ sq.m., with 15 micron anodised fitted & fixed with necessary screws etc. complete as per direction of Engineer-in-charge. Grill made with 10 mm wide and 5.2 mm thick aluminium sheet having expansion width of 66.00 mm and weight not less than 3.26 Kg/Sq.m.
2
3173
1586.71
... More
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately).(A) For Exposed Work. i) 15 mm dia. medium quality
5
969
193.92
... More
ii) 20 mm dia. medium quality
5
1141
228.26
... More
(iii) 25 mm dia. light quality
5
1540
308.05
... More
(iv) 40 mm dia. medium quality
3
1257
419.15
... More
(v) 50 mm dia. medium quality
3
1636
545.4
... More
(vi) 80 mm dia. medium quality
3
2478
826.18
... More
Supplying, fitting and fixing special hand pump no. 6 of approved make
(for 50 mm or 40 mm dia. tube well).
1
3771
3771.34
... More
Supplying, fitting and fixing shower of approved brand and make. Chromium plated round showerwith revolving joint 100 mm dia width rabid cleaning system(Equivalent to code No.542(N) & Model –Tropical / something special of ESSCO or similar brand).
2
913
456.52
... More
Supplying, fitting and fixing of watertec approved make hand shower(health faucet) with 1.00 meter flexible tube with wall hook.
4
2044
511
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(a) 50mm dia. (a) 50 mm dia.
1
2299
2299.77
... More
(b) 40 mm dia.
1
1605
1605.9
... More
(b) 32 mm dia.
1
1171
1171.6
... More
(d) 25 mm. dia.
1
785
785.78
... More
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 Ball Valve (a) 50 mm dia.
1
1139
1139.28
... More
(b) 40 mm dia.
1
558
558.53
... More
(b) 32 mm dia.
1
402
402.99
... More
(d) 25 mm. dia.
1
241
241.39
... More
(e) 20 mm dia.
1
153
153.52
... More
(f) 15 mm dia.
1
99
99.99
... More
Supplying, fitting & fixing bib cock or stop cock i) Chromium plated Bib cock short body (equivalent to code No. 511 & Model – Tropical / Sumthing special of ESSCO or similar brand.
10
5443
544.39
... More
ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
10
6655
665.59
... More
iii) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
8
3983
497.93
... More
iv) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)
15 mm each
8
1244
155.54
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). For Exposed Work. PVC Pipe. i) 15 mm dia.
15
1530
102.01
... More
ii) 20 mm dia.
15
1954
130.29
... More
iii) 25 mm dia.
8
1430
178.77
... More
iv) 32 mm dia.
8
1906
238.36
... More
v) 40 mm dia.
6
1769
294.92
... More
vi) 50 mm dia.
6
2327
387.84
... More
For Concealed Work. i) 15 mm dia.
12
1660
138.37
... More
ii) 20 mm dia.
12
1914
159.58
... More
iii) 25 mm dia.
10
2070
207.05
... More
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the ame as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes 100 mm dia.
0.6
704
1173.62
... More
150 mm dia.
0.6
1112
1854.36
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
4
4100
1025.15
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (i) 2000 litre capacity
1
10538
10538.34
... More
ii) 1000 litre capacity
1
5179
5179.28
... More
Labour for hoisting plastic water storage tank. Upto 1500 litre capacity Upto 1st story from G.L.
1
96
96.96
... More
Extra for each additional story
1
43
43.43
... More
Above 1500 litre upto 5000 litre capacity Upto 1st story from G.L
1
155
155.54
... More
Extra for each additional story
1
72
72.72
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia
3
57
19.19
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes i) 100 mm
25
22068
882.74
... More
ii) 50mm
25
7120
284.82
... More
Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood
blocks and C.I. brackets including two coats of painting of C.I. brackets. (a) 450 mm X 300 mm size
2
2333
1166.55
... More
(b) 550 mm. x 400 mm. size.
2
2793
1396.83
... More
Supplying, fitting and fixing pedestal of approved make for wash basin
(white)
2
3023
1511.97
... More
Supplying ,fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. Sink only.Sink with drain board 1050 mm X 450 mm X 180 mm.
1
5056
5056.06
... More
Supplying ,fitting and fixing approved brand P.V.C Connector white flexible, with both ends coupling with heavy brass C.P. nut , 15 mm dia. 600 mm long.
8
864
108.07
... More
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps.1050mm long.
10
919
91.91
... More
Supplying ,fitting and fixing Pillar cock of approved make. a) CP Pillar cock – 15 mm (Equvalent to code no 507 & Model – Tropical / Sumthing Special of ESSCO or Neo/Smile or Jhonson or similar brand.)
2
1121
560.55
... More
PTMT Pillar Cock - 15 mm. (Prayag or equivalent).
2
448
224.22
... More
Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes,scaffolding, tools and plants s necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. (i) 50 mm dia. boring etc
40
11594
289.87
... More
(ii) 100 mm dia. boring etc. top enlargement
30
12907
430.26
... More
Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. i)50mm
10
3706
370.67
... More
Supply , installation and commissioning of 2.0 HP submerssible pump of Kirloskar/Crompton Greaves brand for raising of water to water storage tank.
1
15150
15150
... More
Supply , installation and commissioning of 2.0 HP centrifugal pump of Kirloskar/Crompton Greaves brand for raising of water to water storage tank.
1
10100
10100
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
1243
1243.31
... More
Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.
1
421
421.17
... More
Supplying, fitting & fixing 300 mm M.S housing clamp of approved quality.
2
4514
2257.35
... More
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
1
7613
7613.38
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.
1
2049
2049.29
... More
Supplying, fitting & fixing H.C.I. bend without door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. With valamoid joints including sealing the top with sand cement mortar (4:1). 100 mm dia.
4
2003
500.96
... More
Supplying, fitting and fixing cast iron ‘P’ or ‘S’ trap conforming to I. S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. i)‘P’ trap : 100 mm.
2
1914
957.48
... More
ii) 'S' trap : 100 mm
2
1622
811.03
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. A) i) Double Socketed 3 Meter Length, 110 mm dia.
10
3181
318.15
... More
ii) Double Socketed 1.8 Meter Length, 110 mm dia.
5
1600
320.17
... More
iii) Double Socketed 1.2 Meter Length, 110 mm dia.
5
1626
325.22
... More
iv) Double Socketed 0.9 Meter Length, 110 mm dia.
2
654
327.24
... More
v) Double Socketed 0.60 Meter Length, 110 mm dia.
2
680
340.37
... More
B) Fittings. i) Coupler.110 mm dia.
2
171
85.85
... More
ii) Plain Tee. 110 mm dia.
2
171
85.85
... More
iii)Door Tee.110 mm dia.
2
393
196.95
... More
iv) Door Tee(LH) & (RH), 110 mm dia.
1
315
315.12
... More
iv)Plain Y.110 mm dia.
4
832
208.06
... More
v) Door Y (LH) & (RH), 110 mm dia.
2
557
278.76
... More
vi) Double Y, 110 mm dia.
2
553
276.74
... More
vii) Double Y with Door
2
696
348.45
... More
viii) Bend 45º. 110 mm dia.
1
89
89.89
... More
ix) Bend 87.5º. 110 mm dia.
4
484
121.2
... More
xi) Cross Tee. 110 mm dia.
2
375
187.86
... More
xii) Vent Cowl,110 mm
3
99
33.33
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. i) With 'P' trap
1
1435
1435.21
... More
ii) With 'S' trap
1
1527
1527.12
... More
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. i) With 'P' trap (with vent)
1
3135
3135.04
... More
ii) With 'S' trap (with vent)
1
3319
3319.87
... More
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). i) 530 mm X 410 mm
2
3074
1537.22
... More
Supplying, fitting & fixing Flat back Urinal (half stall in urinal) in white vitreous china ware of approved make in position with brass screws on 75 mm x 75mm x 75mm. wooden blocks complete. 470mm x 280mm x340mm.
1
954
954.45
... More
Corner urinal 440 mm X 345 mm X 250 mm
2
2357
1178.67
... More
Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm
2
2357
1178.67
... More
Supplying, fitting & fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. White Vitreous china ware. 600 mm X 150 mm. White vitreous chinaware.
4
2339
584.79
... More
Supplying, fitting & fixing foot rest for water closet of size 275 mm X 125 mm with porcelain of approved make.
2
432
216.14
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.a) E.W.C.Plastic (hallow type) white.
16
6140
383.8
... More
b)Anglo Indian, Plastic (hallow type) white.
2
979
489.85
... More
Supplying, fitting and fixing 32mm dia flush pipe of approved make with necessary fixing materials and clamps complete. Polythene flush pipe.C
4
626
156.55
... More
ii) C. P. Flush Pipe.
1
297
297.95
... More
Supplying, fitting & fixing urinal flush pipe fittings of approved brand. C.P urinal flush pipe fitting range of three.
2
2520
1260.48
... More
Supplying, fitting & fixing 18 mm thick marble partition slab with chawk doongri marble square cut, both side polished with two front corners rounded and edge polished.
2
2880
1440.26
... More
Supplying, fitting and fixing glass shelf with aluminium guard rails ordinary type with 5.5 mm. sheet glass. 450 mm. x 125 mm.
2
688
344.41
... More
Supplying, fitting and fixing soap holder. PTMT (Prayag or equivalent).
2
272
136.35
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm. thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, Frame size 550 mm. x 400 mm.
2
1238
619.13
... More
Supplying, fitting and fixing towel rail with two brackets. C.P over brass. 25 mm. dia. and 450 mm. long.
2
775
387.84
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.With Bazree (N.B Variety) (SAIL/TATA/RINL)
1
6498
6498.34
... More
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning,including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials (excluding the cost of master trap only). 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 100 mm dia. of approved make. With Bazree (NB Variety) (others)
1
10024
10024.25
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1)
with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing
spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per :2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.For 20 users.With Bazree (N.B Varity) (others).
1
45379
45379.3
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 mtr. from the bottom having 150 mm. intermediate cement brick work (6:1) band all round and cement brick work (6:1) upto 0.9 mtr. from top with 19 mm. thick cement plastering (4:1) to inside face upto the depth of cement brick work, 12 mm. thick cement plaster (4:1) on outer face from the top of well upto G.L. and 6 mm. thick cement plaster (4:1) on top of the R.C.C. cover slab including filling bottom 1.00 mtr. of inside of the well with brick metal (50 mm. to 63 mm. size) including R.C.C. cover slab of designed thickness with cement concrete (4:2:1) with stone chips with necessary reinforcement and shuttering including one 560 mm. dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring, de-watering and removing the excess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm. thick dry brick work and 250 mm. thick cement brick work (6:1) and 1 mtr. inside dia. (SAIL/TATA/RINL).
1
15739
15739.84
... More
Open jointed stone ware pipe 100 mm dia. supplied, laid and fitted in position duly encircled all round by 150 mm thick layer jhama metal (38 mm to 50 mm size) including excavation of earth in any soil upto required depth including refilling trench,watering and ramming complete. (Cost of Jhama Metal to be paid seperately)
4
1102
275.73
... More
Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens).
In ground floor. 50mm x 25mm x 2.7mm x 2.7mm.
10
2393
239.37
... More
Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.
20
2323
116.15
... More
Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(rate analysis)
100
5498
54.98
... More
Supplying including carriage and stacking at site of 150 mm boulder (rate analysis)
30
35466
1182.21
... More
Iron remover filter
1
42420
42420
... More
0.5 HP(28S) Pump
1
4949
4949
... More
ELECTRICAL WORKS : INTERNAL WIRING & SWITCHYARD LIGHTING: Supply and Installation of MV Floor cum wall mounted Cubical pannel Board , dust, damp and verming proof complete with Bus Bar chamber,MV Danger Board, Ammeter, Volt Meter with selector switches,Indicator Lamps with inter connections along with 200 Amp. 4 nos Copper Bus Bars incuding followinf incoming and outgoing switches
Incoming:
a. 125 A. TPN Switch Fuse Unit with HRC Fuses ( L& T Make O/E Type. SK95001- 1 No.
b. 0-500V. Volt Meter 100mm. With Selector switch ( A.E Make) - 1 No.
c. 0-100A. Ammeter 100 mm. with selector switch & C.T. Coil - 1 no.
d. RYB Indicator Lamp with Cartridge Fuses - 1 Set
200 Amp.3 Phase B.B.Chamber with copper bars-1 set
Outgoing:
a. 63 Amp. 415 V.TPN Main switch O/E type ( L&T makeSK95421) -1 No.
b. 32 A. 415 V.TPN main switch .O/E type ( L&T SK95518)-3 Nos
c. 32 A. 240 V. DP Switch with fuse unit ( L&T SK95594) 1 No. for Battery charger.
d. 32 A. TPN MCB ( Legrand Make)- 2 Nos
e. 32 A. SPN MCB ( Legrand Make) -6 Nos.
1
45854
45854
... More
Supply & fixing 240 V. SPN MCB type 2+12 WayDistribution Board having Double door Sheet Steel Enclosure ( Legrand Make Enclosure (607712) comprising with 12 Nos 6-32 A SPMCB and 1 No. 25 A Legrand make 30mA sensitivity RCCB comp. with neutral link, earth Busbar on wall with necessary connections.
1
7171
7171
... More
Distribution wiring in 1.1 KV grade 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire partly in 19mm bore 3mm thick polythin pipe complete with all accessories embeded in wall to to light/fan/call bell points with Modular type switch fixed on Modular GI switch board with top cover plate flushed in wall flushed in wall incl mending good damages.[ As per approved list of Material ] 8 Mtr.
50
59060
1181.21
... More
Distn. wiring in 3 X 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point with Modular type plug socket & switch as per GS.[ As per approved list of Material ]On Board
14
3767
269.09
... More
Supplying and fixing polythene pipe (3mm thick) complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire as per GS.[ As per approved list of Material ] 19mm dia
800
31128
38.91
... More
25mm dia
100
5295
52.95
... More
Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.[ As per approved list of Material ]
19 mm dia 3 mm thick
250
17020
68.08
... More
25mm dia 3 mm thick
250
20802
83.21
... More
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe as per GS.[ As per approved list of Material ]
3x(1.5 sqmm) [ for 2X 6 A seperate plug ]
100
5187
51.87
... More
2x(2.5 sqmm)+1x(1.5 sqmm)[ for 16 A Power plug, Computer Board ]
200
14050
70.25
... More
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. iv) 2 x 2.5 sq. mm + 1 x 1.5 sq. mm ( copper )
30
583
19.45
... More
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]
6-32 SP
12
2463
205.33
... More
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]
63 A DP
1
1013
1013.7
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket with 16A Modular type switch, without plug top as per GS
8
5445
680.74
... More
S/Delivery 250 volt. 4 Ft. Long 20 Watt LED Single luminaries complete with all accessories incl. S & F 20 watt LED tube (Philips /CG/JAQUAR).
i) TMC 501 P 1 X T - LED
24
35148
1464.5
... More
Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA as per GS
9
2717
301.99
... More
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS
9
781
86.86
... More
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board as per GS
9
4608
512.07
... More
Fixing only exhaust fan after making holes in wall as per GS (12")
7
2488
355.55
... More
Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS (12")
7
1460
208.58
... More
Supply of ceiling fans complete with all accessories having the following Model / Cat No. ( Make -Crompton Greaves/ ) b. 1400 mm Sweep ( Aura Metallic )
9
20452
2272.5
... More
Supply of 250 V. 80W,1420RPM,12''(30cm) sweep A.C. Exhaust fan incl. Aluminium louver shutter etc. (Make - E.P.C. heavy duty).(For Toilet)
7
24745
3535
... More
Excavation of soil for installation of Earth Electrode and filling & ramming as per GS For Soft Soil
6
1394
232.35
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS
2
3293
1646.99
... More
Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS
4SWG
10
194
19.45
... More
Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS
6 SWG
20
281
14.05
... More
Supply & fixing of Vinyl sheet after writing the letters as per direction of EIC after comprising the following:- a) Supply & delivery of rectangular type structure with angle and flat iron structure covered all side except front side by 18SWG GI sheet of size(10’x4’x10") width with necy. back opening hinged door with mechanical locking arrangement and ventilation louvers on both side incl. necy. flat iron support for installation of tube fittings inside with inter connection by S/F 2x1.5sq.mm PVC/A insulated & sheathed copper wire incl. S/F 8 nos 4’ long 40W Fl. Tube light fittings complete set (Philips make-havels) The facia to be made of Vinyl sheet with computerized inscription in blue base with white lettering b) Installation the same sign board in front of the building by making suitable muffing 2 fet height x18”x18” and with neat cement stone etc.with two nos. 32x32x6mm MS angle iron bracket for support on the back side rigidly grouted or drilling hole for protection support by heavy type screw/nuts & cement net finishing etc and painting(Ref PO-5300519088)
1
16160
16160
... More
Connection by 3x1.5sq.mm Copper through poly pipe up to fittings as per direction of EIC.
30
2181
72.72
... More
Supply & fixing of 250 V. 250 W.Metal Halide light fittings complete Set with Ballast, Ignitor, capacitor including 1 no. 250 w M.H lamp ( Philips Make Cat No . MRX051)
15
122715
8181
... More
Supply & erection of 80mm dia G.I pole of 1.5 mtr long in cc muffing of size 1’6”X1’6”X2’ on the roof and C.I loop Box 8”X6”X4” with 2 nos. porcelain chair & 1 no. 15A. kit Kat fuse to be fixed in loop box having hinged door with locking arrangement of the loop box be fixed on G.I pole with necy. Clamping arrangement.
6
16362
2727
... More
Supply & fixing of header assembly made with 100mm. dia G.I pipe pole of 1.00 mtr long at an angle of 110° with the vertical comp. with nuts & bolts incl. painting as per direction of E.I.C
21
29694
1414
... More
Supply & fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint
21
9714
462.58
... More
Erection of earthing complete of steel tubular poles
7
2212
316.13
... More
Supply & fixing of medium gauge GI Pipe ( ISI-Medium) for protection with necessary fittings and jointing metarials for protection for road crossing & other cable protection as required
15
3787
252.5
... More
Supply & Fixing of post top luminaries as gate lightining complete set with ballast, Ignitor, capacitor etc, Philips Cat no. SPC 101 with SON-I-70 W. E lamp and net guard.
4
18180
4545
... More
Supply of 1.1 KV grade PVC cable 4C * 25 SQ-MM
0.4
76005
190013.52
... More
Laying of 1.1 KV grade PVC cable 4C * 25 SQ-MM
400
6060
15.15
... More
Supply of 1.1 KV grade PVC cable 2C * 6 SQ-MM
0.2
7356
36780.78
... More
Laying of 1.1 KV grade PVC cable 2C * 6 SQ-MM
200
3030
15.15
... More
ELECTRICAL WORKS : LABOUR COST SUBSTATION: ERCTION OF GANTRY STRUCTURE WITH PREVISION FOR ISOLATOR & LA WITH FOUNDATION ALONG WITH SUPPLY OF ALL NUT & BOLTS AND LA BASE PLATE 430X430X8 MM
3
73716
24572
... More
ERCTION OF ISOLATOR CUM LA SUPPORT STRUCTURE WITH SUPPLY OF ALL NUT & BOLTS AND LA WITH FOUNDATION BASE PLATE 430X430X8 MM
2
49144
24572
... More
ERECTION OF H/L BUS SUPPORT STRUCTURE WITH FOUNDATION & SUPPLY OF ALL NUT & BOLTS
8
196576
24572
... More
ERECTION OF L/L BUS SUPPORT STRUCTURE WITH FOUNDATION & SUPPLY OF ALL NUT & BOLTS
9
221148
24572
... More
ERECTION OF 14 POLE STRUCTURE WITH 9 MTR PCC POLE FOR 11 KV OUTGOING FEEDERS (L.S.)
1
85000
85000
... More
ERCTION OF C.T. STRUCTURE MATERIAL SUPPLIED BY AGENCY AS PER DRG NO PLN(D)/SS/57. (L.S)
5
93750
18750
... More
ERCTION OF P.T. STRUCTURE MATERIAL SUPPLIED BY AGENCY AS PER DRG NO PLN(D)/SS/57. (L.S)
2
37500
18750
... More
ERCTION OF CABLE SUPPORTING STRUCTURE SUPPLIED BY AGENCY AS PER DRG NO PLN(D)/SS/85. (L.S) (15% OF Material Price)
2
34500
17250
... More
ERECTION OF 33 KV , 400 A , CENTRE RORATING ISOLATORS H.L. WITH E.S. (15% OF Material Price)
3
18858
6286.3
... More
ERECTION OF 33 KV , 400 A , CENTRE RORATING ISOLATORS H.L. W/O E.S. (15% OF Material Price)
6
29832
4972.09
... More
ERECTION OF 33 KV , 400 A , CENTRE RORATING ISOLATORS L.L. W/O E.S. (15% OF Material Price)
11
54211
4928.28
... More
ERECTION OF 33 KV VCB, SCADA COMPATIBLE (6% OF Material Price)
5
84197
16839.41
... More
ERECTION & COMMISSIONING OF 33 KV C&R PANEL, SCADA COMPATIBLE FOR FEEDER CONTROL WITH DIRECTIONAL RELAY (5% OF Material Price)
3
31088
10362.98
... More
ERECTION & COMMISSIONING OF 33 KV C&R PANEL, SCADA COMPATIBLE FOR INDIVIDUAL CONTROL OF POWER TRANSFORMERS WITH DIFFERENTIAL RELAY (5% OF Material Price)
2
32883
16441.72
... More
ERECTION & COMMISSIONING OF 33 KV ,200-100/1-1-1A, CT (15% OF Material Price)
6
36863
6143.93
... More
ERECTION OF 33 KV , DUAL CORE ,DUAL RATIO, 400-200/1-1AMP C.T. FOR INCLUDING (15% OF Material Price)
9
40411
4490.22
... More
ERECTION & COMMISSIONING OF 33KV PT (1PH, O/D TYPE) (15% OF Material Price)
3
7666
2555.41
... More
LAYING & JOINTING OF 1.1 KV 4C X 2.5 SQMM COPPER CONTROL CABLE WITH SUPPLY OF CABLE LUGS,GLANDS,TAPES,SOCKETS ETC. (15% OF Material Price)
1.2
18864
15720.79
... More
LAYING & JOINTING OF 1.1 KV 8C X 2.5 SQMM COPPER CONTROL CABLE WITH SUPPLY OF CABLE LUGS,GLANDS,TAPES,SOCKETS ETC. (15% OF Material Price)
0.75
20534
27379.38
... More
LAYING & JOINTING OF 1.1 KV 12C X 2.5 SQMM COPPER CONTROL CABLE WITH SUPPLY OF CABLE LUGS,GLANDS,TAPES,SOCKETS ETC. (15% OF Material Price)
1.1
43368
39426.3
... More
INSTALLATION & COMMISSIONING OF 30V, 100 AH BATTARY
2
20000
10000
... More
INSTALLATION & COMMISSIONING OF 30V,35 A AUTOMATIC FLOAT CUM BOOST BATTARY CHARGER
2
6000
3000
... More
ERECTION OF 42 KV CLASS GAPLESS LIGHTING ARRESTER (15% OF Material Price)
15
15671
1044.79
... More
LAYING OF 11 KV 3X300 SQMM XLPE CABLE
600
35400
59
... More
LAYING OF 1.1 KV 50 SQMM 4 C PVC CABLE
140
3080
22
... More
JOINTING OF O/D TYPE HEAT SHRINKABLE END TERMINATION JOINTING KIT FOR 11 KV 3X300 SQMM XLPE CABLE
10
18660
1866
... More
JOINTING OF I/D TYPE HEAT SHRINKABLE END TERMINATION JOINTING KIT FOR 11 KV 3X300 SQMM XLPE CABLE
10
18660
1866
... More
MAKING END TERMINATION JOINT INCLUDING SUPPLY OF CABLE LUGS,GLANDS,TAPES,SOCKETS ETC OF 1.1 KV 50 SQMM 4C PVC CABLE
4
1244
311
... More
FIXING OF 12 KV GAPLESS LA (3 NOS=1 SET)
8
2712
339
... More
INSTALLATION OF A.C. SWITCH BOARD (L.S.)
1
4000
4000
... More
INSTALLATION OF D.C. SWITCH BOARD (L.S.)
1
5000
5000
... More
ERECTION & COMMISSIONING OF 11 KV 800A. 9 PANEL SHUNT TRIP SWITCHBOARD WITH VCB. SCADA COMPATIBLE (2IN+1BC+6OUT)
1
58527
58527
... More
INSTALLATION OF C.T. JUNCTION BOX (15% OF Material Price)
5
1875
375
... More
INSTALLATION OF P.T. JUNCTION BOX (15% OF Material Price)
1
375
375
... More
INSTALLATION OF 100 KVA 33/0.4 KV STN SERVICE TRANSFORMER (L.S)
1
3000
3000
... More
ERECTION OF ACSR 200 SQ. MM (PANTHER) CONDUCTOR (3 WIRE) INCLUDING LAYING , HOISTING, JOINTING ETC. (L.S.)
0.25
5500
22000
... More
ERECTION OF ACSR 100 SQ. MM (DOG) CONDUCTOR (3 WIRE) INCLUDING LAYING, HOISTING , JOINTING ETC.
0.12
1985
16544
... More
FIXING OF 33 KV PIN INSULATOR WITH PIN
120
8640
72
... More
FIXING OF 33 KV DISC INSULATOR (IE 3 NOS 11 KV 70 KN DISC)
144
15408
107
... More
FIXING OF 11 KV PIN INSULATOR
60
3780
63
... More
FIXING OF 11 KV DISC INSULATOR
48
3120
65
... More
FIXING OF 11 KV TPGO ISOLETOR
17
54383
3199
... More
SWITCH YARD PAINTING (L.S.)
1
120000
120000
... More
ERECTION OF RAIL POLE FOR SHEILDING STRUCTURE
4
15340
3835
... More
INSTALLATION OF RTCC PANEL FOR 10 MVA, 33/11 KV POWER TRANSFORMER
2
20000
10000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements