West Bengal State Cooperative Marketing Federation Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Cooperative Marketing Federation Limited - BENFED Tender
Eprocure
Opening Date27 Nov 2020
Closing Date18 Dec 2020
Tender Amount₹ 5,87,49,767
Costs
EMD
₹ 11,74,995Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_SCMFL_306767_1Bid Award Id
ViewTender No
SCMF/MD/ENG/NIT-65/2020-21Tender Authority
West Bengal State Cooperative Marketing Federation Limited ViewPurchaser Address
-Website
http://https://www.benfed.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling in foundation or plinth by silver sand in
layers not exceeding 150 mm as directed and
consolidating the same by thorough saturation with
water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity
(B) Do - by fine sand
2.55
-
50985
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)
(A) [Pakur Variety
In ground floor
108.72
-
5207
Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides ( upto a height of 300 mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specification described in 6.2.1. of code IS-6313 (part -II) 1981.( Mode of measurment will be the plan area of foundation treated.)
639.17
-
93
Brick work with 1st class bricks in cement mortar (1:6)
(a) In foundation and plinth
62.65
-
5140
Batch Mixed concrete of M 30 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in computerised batching plant under controlled condition using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification and direction of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. Consumption of cement will not be less than 320 Kg of cement per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. [Cement to be supplied by Deptt, if Cement is supplied by agency then item rate to be deduced as per Format A of Annexure I]
[with Batching Plant & transit mixer]
In Ground Floor & Foundation.
ì) With approved concrete pump
323.7
-
6680.24
ìì) Without approved concrete pump( column)
13.35
-
6527.24
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs .beams .columns.lintels curved or straight including fitting .fixing and striking out after completion of worka.(upto roof of ground floor)
(c ) Steel shuttering or 9 to 12 mm. thick approved quality ply board shuttering in any concrete work
593.51
-
357
Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary ),cutting to requisite length . hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
(a) For works in foundation, basement and upto roof of ground floor /upto 4 m. (ì) Tor steel/Mild steel
52
-
70215.85
BUILDING SUPER STRUCTURE WORKS Batch Mix Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
(b) M 30 Grade upto 1st floor( gf roof)
135.2
-
6680.24
UP to 2nd floor
135.2
-
6775.24
upto 3rd floor
135.2
-
6870.24
upto 4th floor
135.2
-
6965.24
upto 5th floor
135.2
-
7081.24
ROOF
135.2
-
7197.24
upto above roof
40.56
-
7313.24
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs .beams .columns.lintels curved or straight including fitting .fixing and striking out after completion of worka.(upto roof of ground floor)
(c ) Steel shuttering or 9 to 12 mm. thick approved quality ply board shuttering in any concrete work upto 1st floor( gf roof)
894.06
-
357
2nd floor
872.06
-
375
3rd floor
872.06
-
393
4th floor
872.06
-
411
5th floor
872.06
-
433
ROOF floor
872.06
-
455
ABOVE ROOF
261.62
-
477
Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary ),cutting to requisite length . hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
(a) For works in foundation, basement and upto roof of ground floor /upto 4 m.
(ì) Tor steel/Mild steel Foundation UPTO 1ST floor ( gf roof)
27.5
-
70215.85
2nd floor
27.5
-
70695.85
3rd floor
26
-
71175.85
4th floor
26
-
71655.85
5th floor
24
-
72215.85
ROOF
24
-
72775.85
ABOVE Roof
7.2
-
73335.85
Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.
619
-
139
Brick work with 1st class bricks in cement mortar (1:6) Ground Floor
55.41
-
5473
1st floor
55.41
-
5584
2nd floor
55.41
-
5695
3rd floor
55.41
-
5806
4th floor
55.41
-
5939
5th floor
55.41
-
6072
Roof & Above roof
11.08
-
6205
125 mm. thick brick work with 1st class bricks in cement mortar (1:4)
Ground Floor
240.82
-
747
1st floor
240.82
-
759
2nd floor
240.82
-
771
3rd floor
240.82
-
783
4th floor
240.82
-
796
5th floor
240.82
-
809
Roof & Above roof
48.16
-
822
Extra for using approved H.B netting in every third layer in 125 mm th brick work above in any floor
Ground Floor
240.82
-
41
1st floor
240.82
-
41
2nd floor
240.82
-
41
3rd floor
240.82
-
41
4th floor
240.82
-
41
5th floor
240.82
-
41
Roof
240.82
-
41
Above roof
50
-
41
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. M20 grade
gf
0.25
-
6317.2
1st floor
2.5
-
6412.2
2nd floor
4
-
6507.2
3rd floor
4
-
6602.2
4th floor
4
-
6697.2
5th floor
4
-
6813.2
Roof & above roof
0.5
-
6929.2
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs .beams .columns.lintels curved or straight including fitting .fixing and striking out after completion of worka.(upto roof of ground floor)
(When the height of a particular floor is more than 4 m the equivalent floor ht . Shall be taken as 4 m.and extra for works beyond the initial 4 m. ht. shall be allowed under 16 (e) for every 4 m. or part thereof.)
(c ) Steel shuttering or 9 to 12 mm. thick approved quality ply board shuttering in any concrete work Ground Floor
4.13
-
357
1st floor
25
-
375
2nd floor
35
-
393
3rd floor
35
-
411
4th floor
35
-
429
5th floor
35
-
451
Roof & above roof
12
-
473
Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary ),cutting to requisite length . hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
(a) For works in foundation, basement and upto roof of ground floor /upto 4 m. (ì) Tor steel/Mild steel Ground Floor
0.03
-
70215
1st floor
0.4
-
70695
2nd floor
0.4
-
71175
3rd floor
0.4
-
71655
4th floor
0.4
-
72215
5th floor
0.4
-
72775
Roof & above roof
0.1
-
73335
Labour for Chipping of concrete surface before taking up Plastering work. Ground Floor
894.06
-
21
1st floor
872.06
-
21
2nd floor
872.06
-
21
3rd floor
872.06
-
21
4th floor
872.06
-
21
5th floor
872.06
-
21
Roof & above roof
210
-
21
Plaster (to wall,floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface. Including throating, nosing and drip course where necessary (i) With 1:6 cement mortar
20 mm. thick plaster( internal)
Ground Floor and foundation
200
-
152
1st floor
613.58
-
156
2nd floor
613.58
-
160
3rd floor
613.58
-
164
4th floor
613.58
-
168
5th floor
613.58
-
173
Roof
250
-
178
Above roof
50
-
183
(¡¡¡) With 1:4 cement mortar (ceiling)
10 mm. thick plaster
Ground Floor
473
-
122
1st floor
473.76
-
126
2nd floor
473.76
-
130
3rd floor
473.76
-
134
4th floor
473.76
-
138
5th floor
473.76
-
143
Roof
125
-
148
Above roof
37.5
-
157
(i) With 1:6 cement mortar( external)
15 mm. thick plaster
Ground Floor
75
-
140
1st floor
268.45
-
144
2nd floor
268.45
-
148
3rd floor
268.45
-
152
4th floor
268.45
-
156
5th floor
268.45
-
161
Roof
150
-
166
Above roof
30
-
171
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected upto three decimals)
(e) Sal : Malayasian
Ground Floor
0.16
-
76096
1st floor
0.54
-
76296
2nd floor
0.54
-
76496
3rd floor
0.54
-
76696
4th floor
0.54
-
76896
5th floor
0.54
-
77146
Roof
0.2
-
77396
Above roof
0.11
-
77646
M.S. clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction.
(Cost of cement concrete will be paid separately)
(a) 40 mm x 6 mm. x 250 mm.
(The concreting will have to be done for equivalent thickness of 2 layers of brick work and for the entire width of the wall. No deduction on brick work will be made.)
390
-
29
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI marks
(ii) 50mm. X 40mm. X 2.5mm.
210
-
26
Iron socket bolt of approved quality fitted and fixed complete
(b) 100mm long x 10mm dia bolt
70
-
40
ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with
16mm dia rod with centre bolt and round fitting.
(b) 250mm long.
58
-
597
(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including
fitting & fixing complete.
58
-
1954
ii) Godrej Hydraulic door closer fitted and fixed complete
(b) Medium type
58
-
1665
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. 35mm thick shutters with 19mm thick panel of size 30to 45 Cm - Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
Ground Floor
5.85
-
2789
1st floor
19.5
-
2818
2nd floor
19.5
-
2847
3rd floor
19.5
-
2876
4th floor
19.5
-
2905
5th floor
19.5
-
2941
Roof
5.9
-
2977
Above roof
3.9
-
3013
(a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S.,W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor, 1st floor, 2nd floor. (Add extra @ 1% for each addl. floor upto 4th floor and @1.25% for each addl. floor above 4th floor)(ì) Grill weighing above 10 kg./sq.m. and upto 16 kg./sq.m.
Ground Floor
2.03
-
7238
1st floor
4.9
-
7310.38
2nd floor
4.9
-
7383.48
3rd floor
4.9
-
7457.32
4th floor
4.9
-
7531.89
5th floor
4.9
-
7626.04
Roof & Above Roof
2.7
-
7721.37
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S.flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25%
Ground Floor
17.64
-
3402
(a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. Ground Floor
5.67
-
2170
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI
embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
(A) In 10-12 Micron thickness Annodizing film
Gr floor
15
-
6439
1st floor
42.3
-
6439
2nd floor
42.3
-
6439
3rd floor
42.3
-
6439
4th floor
42.3
-
6439
5th floor
42.3
-
6439
Roof
12.5
-
6439
Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mmPrelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5
mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical doorprofiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge,weather seal to be provided through out the frame. The door frame shall be fixed
with the wall using 65/100 mm M.S. Screws through the frame by using P.V.Cfasteners. A minimum of 4 Nos of screws to be provided for each vertical memberand minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟sspecification and direction of Engineer-in-Charge.
1st floor
29.7
-
385
2nd floor
29.7
-
385
3rd floor
29.7
-
385
4th floor
29.7
-
385
5th floor
29.7
-
385
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC DoorShutter consisting of outer frame made out of M.S. tubes of 19 gauge thicknessand size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out ofwhich 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle oneither sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using
PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.
1st floor
8
-
1943
2nd floor
8
-
1943
3rd floor
8
-
1943
4th floor
8
-
1943
5th floor
8
-
1943
Roof
3.5
-
1943
Anodised aluminium decorative handle (hexagonal / fluted) of approed quality
fitted and fixed complete. (i) 150mm plate x 10mm dia rod x 12mm hexagonal/fluted.
70
-
87
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @
2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement
per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make asdirected and removal of wax coating of top surface of tiles with warm water and
polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in- Charge.(White cement, synthetic adhesive and grout material to be supplied by the contractor (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white ement for joint filling with pigment. light colour Ground Floor
521.14
-
1269
1st floor
521.14
-
1274
2nd floor
521.14
-
1279
3rd floor
521.14
-
1284
4th floor
521.14
-
1289
5th floor
521.14
-
1295.25
Roof
120
-
1301.5
18 mm. to 22 mm. thick, kota stone slab set in lime mortar (2:1) or cement mortar (4:1) including levelling course with same mortar as required in floor including pointing in cement mortar (1:2) (1cement:2 stone dust ) with admixture of pigment matching the stone shade. including grinding & polishing ,as per direction of Engineer-in-charge to match with the existing work.
Ground Floor
540.94
-
1010
1st floor
51.8
-
1022
2nd floor
51.8
-
1034
3rd floor
51.8
-
1046
4th floor
51.8
-
1058
5th floor
51.8
-
1074
Roof
20.3
-
1090
Above Roof
14.71
-
1106
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
Ground Floor
65
-
744
1st floor
155
-
749
2nd floor
155
-
754
3rd floor
155
-
759
4th floor
155
-
764
5th floor
155
-
770.25
Roof
65
-
776.5
(b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) Ground Floor
550
-
122
1st floor
1087.34
-
129.2
2nd floor
1087.34
-
136.4
3rd floor
1087.34
-
143.6
4th floor
1087.34
-
150.8
5th floor
1087.34
-
159.1
Roof
326.2
-
167.4
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Water based interior grade Acrylic Primer
(b) Two Coats
Ground Floor
550
-
44.2
1st floor
1087.34
-
44.91
2nd floor
1087.34
-
45.62
3rd floor
1087.34
-
46.33
4th floor
1087.34
-
47.04
5th floor
1087.34
-
47.87
Roof
326.2
-
48.7
Acralic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Ground Floor
550
-
70
1st floor
1087.34
-
70
2nd floor
1087.34
-
70
3rd floor
1087.34
-
70
4th floor
1087.34
-
70
5th floor
1087.34
-
70
Roof
326.2
-
70
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor (b) Two Coats
Premium 100% Acrylic Emulsion
two coats
Ground Floor
120
-
45.1
1st floor
270
-
45.81
2nd floor
270
-
46.52
3rd floor
270
-
47.23
4th floor
270
-
47.94
5th floor
270
-
48.77
Roof
81
-
49.6
SANITARY AND PLUMBING WORKS Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
(a) With 'P' trap
15
-
1421
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
15
-
1015
Providing, fixing testing and commissioning of Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook Model No. ALD-BLK-583 (Allied range), 15mm dia CP two way bib cock of Essco (DLX-512AN).
16
-
1957
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
(ii) 550 mm X 400 mm size
15
-
2208
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
15
-
613
Providing, fixing testing and commissioning of Angular Stop Cock of Essco (DLX-526).
20
-
702
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
(i) 635 mm X 395 mm X 420 mm
15
-
2869
Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished.
30
-
1426
Supplying, fitting and fixing towel rail with two brackets.
(a) C.P. over brass
(ii) 25 mm dia. and 600 mm long
36
-
164
Supplying, fitting and fixing liquid soap container.
(b) PTMT(Prayag or equivalent)
20
-
210
Supplying, fitting & fixing grab bar for handicap toilet with fittings of CERA or equivalent.
20
-
2605
Supplying, fitting & fixing Hinged rail for handicap toilet with fittings of CERA or equivalent.
6
-
9358
Supplying, fitting & fixing Cast iron conforming to I.S. 3989 / 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).
(a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.
(ii) 75 mm dia. (internal)
150
-
571
(ii) 100 mm dia. (internal)
150
-
688
(i) 150 mm dia. (internal)
100
-
1373
Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/1970 and 1729/1964 including joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
(i) 100 mm X 150 mm
30
-
461
(ii) 100 mm X 225 mm
30
-
511
(iii) 100 mm X 300 mm
100
-
555
(iv) 100 mm X 375 mm
30
-
586
(v) 100 mm X 450 mm
30
-
616
(vi) 100 mm X 525 mm
30
-
685
(vii) 100 mm X 600 mm
60
-
710
Cast Iron fittings for soil pipe line conforming to I.S. 1729/2002 including jointing and fitting and fixing in position and painting two coats to the exposed surface complete including cost of all materials & labour. (Payment of paiting will be paid seperatly.)
(a) Single junction of 150 mm. X 100 mm. dia with door
(i) With valamoid joint including sealing the top with cement mortar (4:1)
120
-
1417
(b) Double junction of 150 mm.dia X 100 mm.dia X 100 mm. with door
(i) With valamoid joints including sealing the top with cement mortar (4:1)
36
-
1441
Supplying, fitting & fixing Cast iron double branch equal with door conforming to I.S. 1729/2002 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately)
(a) With valamoid joints including sealing the top with cement mortar (4:1
(ii) 100 mm dia
20
-
916
Supplying, fitting & fixing Cast iron double junction without door conforming to I.S. 1729/2002 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
(a) With valamoid joints including sealing the top with cement mortar (4:1
(ii) 100 mm dia
14
-
866
Supplying, fitting & fixing H.C.I. bend without door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (a) With valamoid joints including sealing the top with cement mortar (4:1
(ii) 100 mm dia
44
-
496
Supplying, fitting & fixing C.I. 'P' trap with valamoid joint complete 75 mm dia and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
40
-
593
H.C.I. bell mouth plain trap supplied, fitted and fixed with valamoid joint complete 100 mm dia and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
30
-
742
Supplying, fitting & fixing approved patent vent cowel I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (i) 150 mm dia.
20
-
729
Supplying, fitting & fixing Aluminium domical grating
ii) 125 mm
40
-
56
xivii) W.C. Ring
110 mm
18
-
124
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(ii) Double Socketed 3 Meter Length(c) 110 mm
100
-
315
(c) 160 mm
150
-
598
(B) Fittings
(iii) Door Tee
(c) 160 mm
20
-
514
x) Bend 45º
(b) 110 mm
10
-
89
(c) 160 mm
15
-
293
x) Bend 87.5º
(b) 110 mm
5
-
120
(c) 160 mm
5
-
388
xv) Vent Cowl
(c) 160 mm
5
-
57
xvi) Pipe Clip
(c) 160 mm
40
-
43
Providing and fixing, testing and commissioning of PVC waste pipe of agricultural sereis of Supreme or equivalent conforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with rubber ring /solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls /foundations /concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc. complete.
40 mm dia
300
-
154.29
50 mm dia
60
-
212
Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides).
(i) 300 mm
150
-
927
Supplying, fitting and fixing PVC pipes for external underground soil and waste line (of Supreme or equivalent make ; sch- 80) conforming to ASTMD - 1785 with all necessary accessories, specials viz. socket, bend, including cutting pipes, making threads,fitting, fixing etc. complete in all respect excluding cost of 200mm PCC encasing and laying all in any position under ground.
150mm dia
220
-
2523
Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
200
-
355
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In Ground floor
1:3:6 prportion
26
-
4912
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete.
Depth of excavation not exceeding 1,500 mm.
100
-
119.27
Solvent Cement
25
-
103
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A)Above ground
(ii) 110 mm dia
40
-
57
(B)Under ground
(ii) 110 mm dia
15
-
84
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and supplied, fitted and fixed manhole cover in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
i) With Pakur variety
12
-
7080
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying, fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials
(i) 900 mm X 750 mm (inside) chamber
3
-
11515
(iii) 20 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size.
Cover: 600 mm X 75 mm
Frame: 750 mm X 150 mm
opening: 525mm
Weight: 170 kg (approx)
3
-
3250
Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S- 12592 (M.D)
(viii) 5 MT load bearing capacity gully pit cover with frame and hinge arrangement for opening of size.
Cover: 470 mm X 420 mm X 80 mm
Frame: 590 mm X 550 mm X 170 mm
opening: 380mm x 305mm
Weight: 100 kg (approx)
10
-
2001
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.
v) For 100 users
i) With Pakur variety
1
-
118483
(ii) For 20 users
i) With Pakur variety
1
-
50209
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (Payment for painting will be made seperately)
(A) For Exposed Work
(b) (ii) 20 mm dia. medium quality
125
-
226
(c) (ii) 25 mm dia. medium quality
40
-
305
(d) (ii) 32 mm dia. medium quality
75
-
355
(f) (ii) 50 mm dia. medium quality
90
-
540
(g) (ii) 65 mm dia. medium quality
30
-
665
(h) (ii) 80 mm dia. medium quality
15
-
818
(i) (i) 100 mm dia. medium quality
10
-
1033
(B) For Concealed Work
(a) 15 mm dia. medium quality
150
-
238
(b) 20 mm dia. medium quality
125
-
266
(c) 25 mm dia. medium quality
26
-
364
(A) Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately)
(ii) 20 mm dia.
125
-
53
(iii) 25 mm dia.
40
-
54
(iv) 32 mm dia.
75
-
79
(vi) 50 mm dia.
90
-
93
(vii) 65 mm dia.
30
-
94
(viii) 80 mm dia.
15
-
94
(ix) 100 mm dia.
10
-
124
(B) Labour for fitting and fixing G.I. pipes above ground (concealed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately.)
(i) 15 mm dia.
150
-
93
(ii) 20 mm dia.
125
-
93
(iii) 25 mm dia.
26
-
93
Supplying, fitting and fixing in position G.I.pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials. Payment for painting will be made seperately
(vi) 50 mm dia. medium quality
120
-
520
(vii) 65 mm dia. medium quality
50
-
645
Labour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.)
(vi) 50 mm dia.
20
-
89
(vii) 65 mm dia.
50
-
89
Supplying G.I. tank with Galvanised iron sheet with 450 mm dia C.I. raised approved type locking cover and 50 mm cleaning flange and plug.
(a) With 2 mm thick G.I. sheet
(i) 1812 litre capacity
6
-
16075
Hoisting G.I. tank (upto and including 1812 litre capacity).
(a) 1st story from G.L.
3
-
438
(b) Extra for each additional story
8
-
144
Punching holes in tank (G.I.).
14
-
38
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
(i) 100 mm dia
6
-
10910
(ii) 80 mm dia
6
-
5526
(iii) 65 mm dia
2
-
3949
(iv) 50 mm dia
7
-
2362
(vi) 32 mm dia
4
-
1258
(vii) 25 mm dia
2
-
912
(viii) 20 mm dia
18
-
657
Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.
e) For depth upto 150 metre for 80 mm dia. tube well with top enlargement of 150 mm dia.
(i) 80 mm dia. boring etc.
300
-
287
(ii) 150 mm dia. boring etc. top enlargement
120
-
685
Supplying, fitting and fixing in position G.I.pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials, cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)
(viii) 80 mm dia. medium quality
200
-
798
(xi) 150 mm dia. medium quality
80
-
1510
Supplying G.I. pipe strainer with brass net & jacketted of approved quality.
(Heavy Type)
(iii) 80 mm dia.
20
-
1875
Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.
(iii) 75 mm
2
-
130
Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm.
(vi) 50 mm
2
-
2203
Supplying, fitting and fixing heavy type bell mouth reducing socket.
(ii) 75 mm X 150 mm
2
-
616
Supplying, fitting and fixing G.I. cap at top
(ii) 150 mm
2
-
503
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
4
-
7538
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
4
-
916
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.
50
-
2029
Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.
40
-
417
Providing and fixing bell plug as required upto 250 mm (internal) dia. ERWMS pipe including cost of materials and labour complete.
2
-
431
Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.
2
-
2235
Providing 200 mm centre guide.
i) With Clamp
2
-
128
Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report.
2
-
8247
Supplying KSB Submersible Pump and Motor Set (Model Cora 7C/10 2 H.P. Star Delta Starting, 440 Volts, having capacity: 7 m3/hr @ 48 mtrs head. It includes Copper Cable 1 X 3 X 1.5 SQ. MM and Control Panel DOL starting with all necessary fittings complete.
3
-
45000
ELECTRICAL WORKS SUB STATION ROOM
Supply & Laying of 1.1 kv Gr. 3.5 core 70 sq.mm PVC/A Aluminium cable on wall/surface incl. S & F MS clams with earthing aattachment in 2 × 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting The cable will run from the supply point to the fuse unit and NL installed inside the Panel Room
25
-
575.35
Supply & Laying of 1.1 kv Gr. 3.5 core 70 sq.mm PVC/A Aluminium cable in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed
22
-
670.35
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 1.1 kv Gr. 3.5 core 70 sq.mm PVC/A Aluminium cable
15
-
229
Finishing the end of 1.1 kv Gr. 3.5 core 70 sq.mm PVC/A Aluminium cable by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
20
-
282
Supplying and fixing 415V, 320A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.
5
-
14668
Distn. Wiring , in 2*2/0.3 Single core strand FR PVC insulated & unsheathed copper wire (Approved make) in 19mm bore 3mm thick polythene pipe complete with all accessories embeded in wall to light /fan/ ex fan point with piano key type switch (ANCHOR) fixed on S.M. Switch Board flushed in wall incl. making good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
15
-
828
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: : 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC on Board
10
-
76
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per Approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)
10
-
262
Supply & Fixing 240V 1400mm . Sweep A.C Ceiling fan (Make: HAVELLS/POLAR/CG) complete with all accessorioes and down rod wire as per G.S
10
-
2840
Supply & Fixing Socket type fan regulator (Step type) (Brand Approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.
5
-
272
S & F single fluorescent light fitting complete with all accessories directly on wall/ceiling with ceilingnplates, nipples etc. as required (PHILIPS Make)
10
-
1268
S&F 250V , Havells 2+4-Way 6-32Amp/way SPMCB with 40A DP Isolater with sheet steel enclouser flushed in wall incl. nery connections as per G.S
6
-
2126
Excavation of soil for installation of Earth Electrode and filling
& ramming for Morrum Soil.
6
-
286
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By TATA-Medium GI pipe
4
-
1675
Extra treatment of soil by using salt and charcoal for pipe electrode
4
-
598
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
5
-
213
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S. for 2 No Security Room
40
-
10
S&F 250V , Havells 2+4-Way 6-32Amp/way SPMCB with 25A DP Isolater with sheet steel enclouser flushed in wall incl. nery connections as per G.S [3+3]
12
-
2126
Distn. Wiring , in 2*2/0.3 Single core strand FR PVC insulated & unsheathed copper wire (Approved make) in 19mm bore 3mm thick polythene pipe complete with all accessories embeded in wall to light /fan/ ex fan point with piano key type switch (ANCHOR) fixed on S.M. Switch Board flushed in wall incl. making good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
125
-
828
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: : 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
125
-
76
Distn wiring in 2*36/0.3 + 1*22/0.3 as ECC single core stranded FR PVC insulated & unsheathed copper wire (Approved make) in 19mm bore 3mm thick polythene pipe complete with all accessories embeded 5-pin plug point and MCB to Switch Board connection.
210
-
171
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand Approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
130
-
324
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per Approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)
75
-
262
Supply & Fixing 240V 1400mm . Sweep A.C Ceiling fan (Make: HAVELLS/POLAR/CG) complete with all accessorioes and down rod wire as per G.S
75
-
2840
Supply & Fixing Socket type fan regulator (Step type) (Brand Approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.
75
-
272
S&F 240V A.C. Single phase 300mm . Dia 1400 R.P.M Exhust fan (Make: HAVELLS/POLAR/CG) with cowl incl. making hole to Bldg. and mending good damages
12
-
4407.5
S & F single fluorescent light fitting complete with all accessories directly on wall/ceiling with ceilingnplates, nipples etc. as required (PHILIPS Make)
45
-
1268
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with 18w CFL Lamp
35
-
284.5
Excavation of soil for installation of Earth Electrode and filling & ramming for Morrum Soil.
5
-
286
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By TATA-Medium GI pipe
5
-
1675
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
5
-
213
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
20
-
10
BUILDING
S&F 240V 16A sheet steel DP Main switchs with fuse on L&N on angle iron frame on wall.
90
-
655
S&F 415V 100A sheet steel TPN Main switchs with fuse on L&N on angle iron frame on wall.
18
-
7322
S&F 4 Bar 415V, 100A [85mm Cu] 500mm*150mm steel enclosers busbar
30
-
3241
S&F 240V , Havells 2+4-Way 6-32Amp/way SPMCB with 25A DP Isolater with sheet steel enclouser flushed in wall incl. nery connections as per G.S
100
-
2126
Supplying and laying of 1.1kv Gr. 2-core 4 sq. mm. PVC/ UA Copper cable with S & F No. 10 SWG GI (Hot Dip) wire as ECC through PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works
2700
-
226
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per Approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)
75
-
262
Supply & Fixing 240V 1400mm . Sweep A.C Ceiling fan (Make: HAVELLS/POLAR/CG) complete with all accessorioes and down rod wire as per G.S
75
-
2840
Supply & Fixing Socket type fan regulator (Step type) (Brand Approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.
75
-
272
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC
round block / round bakelite on wall/ceiling with 18w CFL Lamp
7
-
284.5
S & F PHILIPS make single fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.
73
-
1344
S & F PHILIPS Make twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.
150
-
1811
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
250
-
828
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
16
-
76
S&F 240V A.C. Single phase 300mm . Dia 1400 R.P.M Exhust fan (Make: HAVELLS/POLAR/CG) with cowl incl. making hole to Bldg. and mending good damages
50
-
4407.5
Distn wiring in 2*36/0.3 + 1*22/0.3 as ECC single core stranded FR PVC insulated & unsheathed copper wire (Approved make) in 19mm bore 3mm thick polythene pipe complete with all accessories embeded 5-pin plug point and MCB to Switch Board connection.
600
-
171
Excavation of soil for installation of Earth Electrode and filling & ramming for Morrum Soil.
2
-
286
Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed
36
-
1675
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
72
-
217
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
20.6
-
10
PUMP ROOM
S&F 240V , Havells 2+4-Way 6-32Amp/way SPMCB with 25A DP Isolater with sheet steel enclouser flushed in wall incl. nery connections as per G.S
1
-
2126
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
6
-
828
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
2
-
76
Distn wiring in 2*36/0.3 + 1*22/0.3 as ECC single core stranded FR PVC insulated & unsheathed copper wire (Approved make) in 19mm bore 3mm thick polythene pipe complete with all accessories embeded 5-pin plug point and MCB to Switch Board connection.
10
-
171
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per Approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)
1
-
262
Supply & Fixing 240V 1400mm . Sweep A.C Ceiling fan (Make: HAVELLS/POLAR/CG) complete with all accessorioes and down rod wire as per G.S
1
-
2840
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC
round block / round bakelite on wall/ceiling with 18w CFL Lamp
1
-
284.5
S&F 240V A.C. Single phase 300mm . Dia 1400 R.P.M Exhust fan (Make: HAVELLS/POLAR/CG) with cowl incl. making hole to Bldg. and mending good damages
1
-
4407.5
S & F single fluorescent light fitting complete with all accessories directly on wall/ceiling with ceilingnplates, nipples etc. as required (PHILIPS Make)
1
-
1268
Excavation of soil for installation of Earth Electrode and filling
& ramming for Morrum Soil.
1
-
286
Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed
1
-
1675
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
1
-
217
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
10
-
10
STREET LIGHTING
Supply & Laying of 1.1kv Gr. 4-core 16 sqmm. PVC/ A Alluminium cable in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed run from PILLER BOX TO STREET LIGHT POLE
450
-
341
Supply of 9Mt long swaged welded tabular pole with sofe plate & cap (Calcutta Poles & Tubes Co.) 410-5p-26 designed weight of the pole will be 92kgs
30
-
13250
Providing CC (6:3:1) muffing 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if any incl. fixing only loop box if necessary
15
-
679
Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly
15
-
3097
Painting the above pole with 2 coats of Alluminium paint over one coat of R.O primer incl. preparation cleaning etc. for receiving fresh coat paint
40
-
348
S/F water proof looping cable box 200mm *150*100mm. Deep having 4mm thick comprising of one /two 250V 6-10Amps SPMCB one porceline insulator one compression type brass gas ketted C.I top cover with brass machine etc.
40
-
923
S/F single arm bracket 1.68 Mt long made from 40mm dia. G.I (TATA-M) pipe to be fix on the pole with neey clamps G.I bolts washers etc. and paint with 2 coats of paint over one coat of R.O orimer as per direction of Eic
36
-
2060
S/F double arm bracket 1.68 Mt long made from 40mm dia G.I (TATA-M) pipe to be fix on the top of the pole by using proper clamps nuts bolts etc. as required incl. painting as per G.S
4
-
4100
Supply & fixing of streelight to be fixed on the top pole bracket PHILIPS Esplanade SGP401 1XCDMTT250W
10
-
9697
Excavation of soil for installation of Earth Electrode and filling & ramming for Morrum Soil.
40
-
286
Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed
12
-
1675
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
135
-
10
S/F HAVELES MAKE jupiter integral 1*70W MH DE Housing Ballast decorative light fittings
4
-
8553
CABLE
Supply & Laying of the following 1.1kv Gr. Cable partly inside the main pannel room by clamping arrangment as neey. And mainly in underground tranch 460mm wide 760mm average depth with brick protection on the top of the cable with 8Nos bricks permeter incl. fitting the space between cable and brick and remmed. The cable will be run as follows:
(I) MAIN PANEL TO SUB STATION ROOM: 1.1kv Gr. 2-core 6 sqmm. PVC/ A Alluminium cable
14
-
268.7
(II) MAIN PANEL TO ADMIN BUILDING: (A)1.1kv Gr. 4-core 25 sqmm. PVC/ A Alluminium cable
220
-
417.8
(III) MAIN PANEL TO PUMP ROOM: (A) 1.1kv Gr. 4-core 25 sqmm. PVC/ A Alluminium cable
27
-
417.8
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 2 core 6 sq. mm.
2
-
74
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core 25 sq. mm.
4
-
173
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core 16 sq. mm.
2
-
141
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core 10 sq. mm.
8
-
141
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 2 core 10 sq. mm.
2
-
121
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 2 core 6 sq. mm.
2
-
74
S/F CRC sheet metal (16SWG) dB/Loop Box /of 175mm *100mm *65mm with porcelaie chair with neey. 3mm thick perspex top cover flushed in wall incl. painting and mending damages
8
-
173
S&F 50mm dia G.I pipe (ISI-M) pipe protection of the above cable for road/floor crossing as per G.S
25
-
383
Add 3% Fire Demand on substructure & superstructure
1
-
1272485.86
Add 12% G.S.T. + 1% L.W.Cess
1
-
6813975.9
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements