West Bengal Medical Services Corporation Limited Tender

Supply and fixing of 7 watt, LED type single dome aviation obstruction light on top of the High mast .(make:- Havells/Philips/Crompton/Bajaj)

Supply and fixing of 220-240 volt, 400watt, High pressure sodium vapour (HPSV)lamp, tubular shape. (Make:-HAVELLS/BAJAJ).

Supply and fixing of 220-240 volt, 150 watt, High pressure sodium vapour (HPSV)lamp lamp, tubular shape.(Make:-HAVELLS/BAJAJ).

Supply and fixing of 1x20 watt LED lamp with Crown shaped post top lantern in soothing opal finish made up of Polycarbonate, suitable LED lamp B22 base.Mounting Pole Dia - 60 mm (max) OD. Dimension: Width: 200 mm & Height: 235 mm.(Make:- Havells, cat no:- LHDC10115099)

Supply and fixing of open construction 220/240 volt, 400 watt, HPSV/MH electromagnetic ballast consisting of high quality silicon steel lamination with argon welding , super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volts supplied, suitable for commercial, industrial and area lighting aplications. (Make:-BAJAJ, Luminarie type:- BJOS 400 SV/MH, Lamp type:- HPSV/MH 400W, suitable to operate with Bajaj ignitor BJIGN HPSV 1).

Supply and fixing of open construction 220/240 volt, 150 watt, HPSV/MH electromagnetic ballast consisting of high quality silicon steel lamination with argon welding , super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volts supplied, suitable for commercial, industrial and area lighting aplications. (Make:-BAJAJ, Luminarie type:- BJOS 150 SV/MH, Lamp type:- HPSV/MH 150W, suitable to operate with Bajaj ignitor BJIGN HPSV A).

Supply and fixing of 42 MFD +- 5% , 250 VAC 50 Hz capacitor (MPP 'SH'- 25/85/21, IS 1569).(Make:-BAJAJ).

Supply and fixing of 20 MFD +- 5% , 250 VAC 50 Hz capacitor (MPP 'SH'- 25/85/21, IS 1569).(Make:-BAJAJ).

Supply and fixing of 240 volt, 50 Hz ignitor for 400 watt HPSV lamp (Make:- Bajaj, Luminarie type:- BJIGN HPSV 1).

Supply and fixing of 240 volt, 50 Hz ignitor for 150 watt HPSV lamp (Make:- Bajaj, Luminarie type:- BJIGN HPSV A).

Supply and fixing of lamp holder for 400 watt HPSV lamp (Make:- Bajaj).

Supply and fixing of lamp holder for 150 watt HPSV lamp (Make:- Bajaj).

Supply and fixing of Symmetrical beam non-integral floodlight luminaries (including control wire by copper lugs from luminaries to control gear box), Grey hammertone stove enamelled finished die-cast aluminium housing, spun aluminium reflector, heat resistant toughened clear glass cover. (Luminarie type BJEF 21 S,Make:- Bajaj) suitable one no 400 W HPSV lamp.

Supply and fixing of HID lamp control gear boxes(including control wire by copper lugs from mast to control gear box) ,Grey powder coated deep drawn CRCA sheet steel box with rubber gasket and other accessories suitable for one no 400 W HPSV lamp.(Luminarie type BJCG 400 SV DD WOB, Lamp type:- HPSV/MH 400W,Make:- Bajaj)

Supply & fixing of Double arm header assembly suitable for 70mm top made with GI pipe Jacket of 30cm long with 1.5 mtr. long 40mm dia GI pipe bracket duly welded with top cap at an angle of 110 degree with the vertical incl. 12 mm dia full threaded through nuts-bolts and 3 nos. supporting nut-bolts etc. including necessary painting as per direction of EIC. (Make: Subham/Bajaj /Utkarsh/Jindal).

Distribution wiring in 1.1 KV, 2x36/0.3 (2.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 19mm size polythine pipe incl. necy. fittings as required.

Erection of high Mast (22M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants and fixing, checking & functional of existing 22M HMLT raising lowering system comprising, head frame with nut bolts, luminaries carriage suitable for 14 nos LED luminaries, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor ,copper lugs, control gear box, connector plate along with construction of shallow foundation with cement concrete including 8 nos. M30 foundation nut, bolts for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of the agency. The soil test and submission of its report and approval of foundation drawing from WBMSCL all are within the scope of the work.

Installation and commissioning of existing external feeder piller including 1200x450mm PCC foundation(1:4:8, 300 mm above FGL) along with necessary nuts & bolts, clamps, at bottom of the panel.

Earthing Installation – with Pipe Electrode :- Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Supply and fixing of FM1/Quartz Daily 240 VAC Base/DIN Mounting timer,cat no-J648B1(Make-GIC,L&T)

Supply and fixing of 3 pole power contactors- type MNX40, cat no:- CS94190, Conforms to IS/IEC 60947-4-1 & IEC 60947-4-1, Range from 9A-650A AC-3, click fit type construction upto 40A, coil on top design in 95A and above with separate Front mounting Add on block (2NO+2NC). (Make-L&T, type:- MNX 9-80/MCX 01-23, cat no:- CS94190)

Supply and fixing of different size L.T. cable, working voltage 1.1 KV grade, heavy duty XLPE insulated, armoured, screened, stranded, Al distribution power conductor aluminium cable, conforming to IS : 7098 ( Part - I ) . (Make-Gloster/polycab/Havells)-i) 4C X 16 sqmm

Supply and fixing of different size L.T. cable, working voltage 1.1 KV grade, heavy duty XLPE insulated, armoured, screened, stranded, Al distribution power conductor aluminium cable, conforming to IS : 7098 ( Part - I ) . (Make-Gloster/polycab/Havells)-i) 4C X 6 sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Supply and laying 50mm dia medium duty GI pipe with cutting the existing butimin road and filling with concreate.

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :For, 4CX16 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :For, 4CX16 sqmm