West Bengal Industrial Infrastructure Development Corporation Tender

ii) 4 core 35 Sq.mm.

Finishing end by solderless socket by crimping method as per GS for the following cable/wire:- i) 4 core 70 Sq mm

ii) 4 core 35 Sq.mm.

S/F earth busbar of G-(hot dip) MS flat of 25 x 6 mm on wall as per GS.

Connecting the equipment to earth busbar incl. S & F 4 SWG GI wire (Hot Dip) on wall with GI saddles, holes etc. as per GS.

Supply and Fixing perforated GI Cable Tray with perforation not more than 17.5% suspended from ceiling incl S&F GI conector, 6mm dia dia MS suspender, bolts & nuts, steel fasterner with 25X25X3mm anglr iron support 300 X50X1.25mm (18SWG) Incl Al painting of MS support

Supplying & Fixing earth busbar of galvanized ( Hot Dip) MS flat 50mm x 6mm on wall having clearance of 6 mm from wall including providing drilling holes on the busbar complete with GI bolts, nuts, washser spacing insulators ets as required

Connecting the equipments to earth busbar including Supply and Fixing GI (Hot Dip) wire of Size as below on Wall/Floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc as required and mending good damage of Solid GI wire no. 10SWWG

Laying of cable 3.5 / 4 core 35sqmm on wall/surface incl S&F MS saddles with earthing attachment 2x10 SWG GI (Hot Dip) wire making holes etc as necy mending good damage and paining

Laying of cable 3.5/4 core 70sqmm on wall/surface incl S&F MS clams with earthing attachment 2x10 SWG GI (Hot Dip) wire making holes etc as necy mending good damage and paining

Pannel Supply, Erection, Testing and commissioning Wall mounted Cubical Panel Board of size 1650x1450x350mm (approx), made out of 2/1.6 mm thick CRCA sheet complete with TPN Aluminium busbar(EL aluminium 25 X 10 mm) , danger notice board, earth terminal and other components as mentioned below, Cable alley, MS suporting chanel of suitable size as per approved drawing and direction of E-in-C. All doors shall be provided with concealed hinged, continuous gaskets and pad locking arrangement.The cubical panel board will be painted with Siemens grey powder coated paint RAL-7035. The manufacturer must be CPRI approved and the panel should confirm routine test as per instruction of E-in-C and The panel should be IP 43 Indoor type single front protection with wiring of 1.1KV PVC flexible copper wire with proper rating as per ISI. Incoming:- i) DN2 - 160 amps 4P MCCB 36 KA Thermal Magnetic Release (Make-L&T) - 1 No. ii) DN2 -250 amps 4P spreader Link (Make-L&T) -1 No. iii)DN2 - Ex Rotary Handle (Make-L&T)- 1 No. iv) DN2 - Auxiliary 1 C/O + TAC 1 C/O (Make-L&T)- 1 No. v) 6 amps 4P MCB 10 KA (Make-L&T)- 1 No. vi) 6 amps DP MCB 10 KA (Make-L&T)-1 no. vii) indicationg Lamp R-2,Y-1,B-1,G-1,A-1 (Make-L&T)- 6 Nos. viii) Digital Multifunction meter (Make-L&T)- 1 no. ix) Current Transformer 150/5 cl-1 VA 10 (Make-AE/Kappa)- 3 Nos. outgoing:- i) DN0 -63 amps 4P MCCB 36 KA Thermal Magnetic Release (Make-L&T) - 8 Nos. ii) DN0 - Ex. Rotary Handle (Make-L&T)- 8 Nos. iii) DN0 -Auxiliary 1 C/O + TAC 1 C/O (Make-L&T)- 8 Nos. iv) 6 amps DP MCB 10KA (Make-L&T)- 8 Nos. v) Indicating Lamp R-8,G-8,A-8 (Make L&T) -24 Nos.

Supplying and fixing double door Horizontal 6 way TPN MCB Distribution board Enclosure (607716/current Cat) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ((Make:/L&T/Havells/Legrand) as approved by E-in-C. ( 1 for Lighting Power & 1 no for AC)

Supplying and fixing double-door 2+12 way SPN MCB Distribution Board Enclosure (607712) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make:-L&T/ Havells/ Legrand ) as approved by E-in-C.

Supplying and fixing double-door 2+8 way SPN MCB Distribution Board Enclosure (607711) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make:-L&T/ Havells/ Legrand ) as approved by E-in-C.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulatyed & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl necy fittings as required (Make :- ISI marked, KEI/ Havells/ Gloster/ Mescab i) 2x84/0.3(6sqmm)+ 1x56/0.3(4 sqmm)

ii) 2x36/0.3(2.5sqmm)+ 1x22/0.3(1.5 sqmm)

iii) 2x56/0.3(4sqmm)+ 1x36/0.3(2.5 sqmm)

Supply & Fixing 240V, 6 amps, 3 pin Moduler type plug socket (Brand approved by EIC) with 6 amps Moduler type switch without plug top on 4 module GI Moduler type switch board with top cover plate and making necy. Connections with PVC cu wire and earth continuty wire etc

Supply & Fixing 240v, 6 amps, Moduler type switch (Brand approvaed by EIC) on existing GI Moduler type switch board having top cover plate and making necessary connections as required.

Supply & Fixing 240v, 16 amps Piano key type switch (Brand approved by EIC) on GI Moduler type switch board having top cover plate and making necessary connection as required.

Supply & Fixing 240V, 6 amps 3 pin Moduler type plug socket (brand approved by EIC) without switch & plug top on existing GI Moduler type switch board with top cover plate and making necy. Connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, 16 amps 3 pin Moduler type plug socket (brand approved by EIC) without switch & plug top on existing GI Moduler type switch board with top cover plate and making necy. Connections with PVC Cu wire and earth continuity wire etc.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make :- ISI marked, KEI/ Havells/ Gloster/ Mescab ) as approved by E-in-C) of the following sizes in the prelaid polythene pipe of reputed make as approved by E-in-C and by the prelaid GI fish wire and making necy. connection as required a) 3 x 22/0.3 (1.5 sqmm)

Supply & Fixing 240V 25 amps Modular type Starter (Brand approved by EIC) with 25A modular switch type DP MCB (C-Curve) and 4 module GI Modular type switch board with 4 Module top covar plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire earth continuity wire etc.

Supplying of the following material with prior approval of E in C in respect of brand/make incl warranty/garranty certificate/test report etc at works site i) Supply of recessed mounted high efficiency 2'x2' LED panel light Type RC380B LED36S-6500 G6 L60W60 PSU OD S1 Philips make/Similar Crompton /Similar Bajaj/ Similar make as approved by EIC) with necessary arrangement for groove cutting of false ceiling including S/F of GI wires of proper size for suspension of luminires firmly & rigid along with the false ceiling as per direction of EIC

Supplying of the following material with prior approval of E in C in respect of brand/make incl warranty/garranty certificate/test report etc at works site i) Supply of recessed mounted high efficiency Glaze line LED panel Tube light Type SP790X I LED225 865 PSU W6L 120 OC WH Philips make/Similar Crompton /Similar Bajaj/ Similar make as approved by EIC) with necessary arrangement for groove cutting of false ceiling including S/F of GI wires of proper size for suspension of luminires firmly & rigid along with the false ceiling as per direction of EIC

Supplying of the following material with prior approval of E in C in respect of brand/make incl warranty/garranty certificate/test report etc at works site i) Supply of recessed mounted high efficiency GreenPerform Sleek round light Type DN296B LED20S-6500 PSU WH Philips make/Similar Crompton /Similar Bajaj/ Similar make as approved by EIC) with necessary arrangement for groove cutting of false ceiling including S/F of GI wires of proper size for suspension of luminires firmly & rigid along with the false ceiling as per direction of EIC

Supplying of the following material with prior approval of E in C in respect of brand/make incl warranty/garranty certificate/test report etc at works site i) Supply of recessed mounted high efficiency Philips Light with Batten TMC 502 1XT-LED 22W and BN308C LED205-6500 L60 PSU WH Philips make/Similar Crompton /Similar Bajaj/ Similar make as approved by EIC) with necessary arrangement for groove cutting of false ceiling including S/F of GI wires of proper size for suspension of luminires firmly & rigid along with the false ceiling as per direction of EIC

Supply and fixing of the following material with prior approval of E in C in respect of brand/make incl warranty/garranty certificate/test report etc at works site i) Supply of recessed mounted high efficiency Sky COB LED light Type 12W Sky COB Tilt LED Spotlight (NW) Philips make/Similar Crompton /Similar Bajaj/ Similar make as approved by EIC) with necessary arrangement for groove cutting of false ceiling including S/F of GI wires of proper size for suspension of luminires firmly & rigid along with the false ceiling as per direction of EIC

Supply and fixing of the following material with prior approval of E in C in respect of brand/make incl warranty/garranty certificate/test report etc at works site i) Supply of recessed mounted high efficiency 5 meter Sky COV LED Strip light Type LED Strip SKYCove 5M NW with driver Philips make/Similar Crompton /Similar Bajaj/ Similar make as approved by EIC) with necessary arrangement for groove cutting of false ceiling including S/F of GI wires of proper size for suspension of luminires firmly & rigid along with the false ceiling as per direction of EIC

Fixing only the pendent light fittings compele with lamp, shade and flexible copper wire incl S&F pendent holder for Greenperform Sleek round light

Fixing only single/twin light fittings compete with all accessaries directly on wall/ceiling with HW block and ceiling olates, nipples for

Fixing only single/twin fluorescent light fittings complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, ceiling plate, nipples for the for 2'x2' LED light

Supply & Fixing Industrial Plug 63 amps of Type DHQBB65063 Havells Make/Similar L&T/Similar Scheinder of Poles (3P+N+E) of type IP67

Supply & Fixing Industrial Connector 63 amps of Type DHQDB65063 Havells Make/Similar L&T/Similar Scheinder of Poles (3P+N+E) of type IP67

Supply & Fixing Industrial Socket 63 amps of Type DHQCB65063 Havells Make/Similar L&T/Similar Scheinder of Poles (3P+N+E) of type IP67

Supply 250 mm dia Plastic exhaust fan (ventaliting Fan) complete will accessories ( Usha Make Model no.CRISP AIR EXH FAN / Similar Havelles or crompton make) as approved by E-in-C.

Fixing only exhaust fan after making in wall and making good damage and smooth cement finish etc as practicable as possible and providing necy. Length of PVC insulated wire and making cennection for exhausetof diameter 250mm(23cm)

Fixing only louver shutter/Cowl on wall with necy. Bolts & Nuts for diameter 250mm(23cm)

Supply 300 mm dia Metal heavy duty exhaust fan complete will accessories 900 r.p.m.( Usha Make Model no.S.PH Turbo HDEF / Similar Havelles or crompton make) as approved by E-in-C.

Fixing only exhaust fan after making in wall and making good damage and smooth cement finish etc as practicable as possible and providing necy. Length of PVC insulated wire and making cennection for exhausetof diameter 300mm(30cm)

Fixing only louver shutter/Cowl on wall with necy. Bolts & Nuts for diameter 300mm(30cm)

Supply 400mm Wall bracket fan complete with all accessories( Usha Make Model no. 400MM Striker HI- SPEED Striker , High Speed /similar Havells or Crompton Make) , as approved by EIC.

Fixing only cabin Fan on wall by S&F rag bolts, nuts & washers (6 mm dia x 62mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5mt. Length.