West Bengal Industrial Development Corporation Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal Industrial Development Corporation - WBIDC Tender
Building Construction
Construction Works
Eprocure
Opening Date5 Jan 2021
Closing Date30 Jan 2021
Tender Amount₹ 16,38,45,018
Costs
EMD
₹ 40,96,074Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_WBIDC_311255_1Bid Award Id
ViewTender No
WBIDC/PIP/Truck Terminal/20-21/TER-03/01Tender Authority
West Bengal Industrial Development Corporation ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Annexure 3 Tender Drawings for Terminal 3
Annexure 2 Electrical Specification for Terminal 3
Annexure 1 Civil Specification for Terminal 3
BOQ Items
... More
Filling in foundation or plinth by silver sand in layers not Exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
850
-
521.07
... More
Earthwork in filling, in compound, tank, lowland, ditches, etc. with good earth in layers not exceeding 150 mm including breaking clods and consolidating the same by ramming and dressing completely. With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.
16760.6
-
399.01
... More
BOUNDARY WALL
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500 mm
2269.02
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation
1548.96
-
77.54
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
272.43
-
521.07
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding
shuttering) In ground floor
(A) [Pakur Variety]
(a) 1:3:6 proportion
140.15
-
4830
... More
Hire and labour charges for shuttering with centreing and necessary staging. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thick approved quality plyboard shuttering in any concrete work.
1571.81
-
363
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade Roof & above
381.3
-
6114.39
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor steel. For works in foundation, basement and upto roof of ground floor / upto 4 m
37.42
-
71269
... More
Brick work with 1st class bricks in cement mortar(1:6). In foundation and plinth
324.84
-
4812
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging chipping where necessary. With 1:6 cement mortar 20 mm thick plaster
3360
-
155
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface or as per direction of Engineer in Charge.
787.5
-
5.8
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. Two coats
3360
-
45.1
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Normal Acrylic Emulsion
3360
-
97
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
1443.75
-
29
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface. With super gloss (hi gloss). Two coats (with any shade except white). any floors. Roof & above.
1443.75
-
79
... More
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing &
direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved
make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all
consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. ii) For other Structural works like galleries etc.
32.56
-
74900
... More
MAINTANANCE OFFICE
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
20
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
8
-
77.54
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS:
383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
14.02
-
543.51
... More
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
11.56
-
93
... More
Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
24.75
-
110
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
75.82
-
363
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Ground floor
22.72
-
335
... More
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
6.76
-
24
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
1.38
-
71269
... More
Cement concrete with graded stone chips(30mm nominal size) any floor 1:3:6 proportion. foundation, basement all floor, Roof & above
3.65
-
4830
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.Roof & above
10.73
-
6114.39
... More
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Foundation, basement all floor, Roof & above
1.01
-
5632.57
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
24.75
-
312
... More
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
1.5
-
5081
... More
25mm thk Damp Proof Course with cement concrete (1:1.5:3) (with graded stone aggregate 10mm normal size) & painting the top suface with a coat of bitumen [VG 40] using 1.7kg. Per Sqm. Including heating the bitumen & cost & carriage of all materials complete. [ Bitumen to be supplied by the Agency]. Foundation, basement all floor, Roof & above
5
-
261
... More
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
11.28
-
5035
... More
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Foundation, basement all floor, Roof & above
5.5
-
664
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
59.63
-
155
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
105.92
-
136
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
24.75
-
123
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) & marble dust in proportion (1:2) including smooth finishing & rounding off corners including raking out joints or roughening of concrete surface & application of cement slurry before flooring works using cement @1.75kg/sqm all complete including all materials & labour. In ground floor. 3mm thick topping(High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 25mm thk. all floor, Roof & above.
27.75
-
264
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: malayasian. any floors. Roof & above.
0.06
-
75572
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf).any floors. Roof & above.
1.95
-
3955
... More
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
6
-
25
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
3
-
74.15
... More
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
1
-
117
... More
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
1
-
233
... More
Anodised aluminium decorative handle (hexagonal/ftuled) of approved quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. All floor & roof
2
-
100
... More
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
1
-
1899
... More
Godrej Hydraulic door closer fitted and fixed complete. Heavy type. Any floors. Roof & above.
1
-
2064
... More
Providing, fitting and fixing in position glazed casement/ 2 track or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float/smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
59.4
-
448
... More
Supplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
172.8
-
94
... More
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above. In ground floor.
2.86
-
4330
... More
Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc.. any floors. Roof & above.
5.46
-
38
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
15.09
-
29
... More
Supplying and applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
105.92
-
45.1
... More
Supplying, and, applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
105.92
-
97
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
168.76
-
33.7
... More
Supplying,applying rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
168.76
-
122
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
168.76
-
70
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: on timber or plastered surface. With super gloss (hi gloss). Two coats (with any shade except white). any floors. Roof & above.
5.46
-
81
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shade). any floors. Roof & above.
15.09
-
77
... More
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
10.8
-
585
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface or as per direction of Engineer in Charge.
88
-
5.8
... More
W.B.I.D.C OFFICE
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
196.19
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of
measurement of finished quantity of work)
(a) With earth obtained from excavation of foundation.
116.19
-
77.54
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS: 383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
95.75
-
543.51
... More
(c) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.)
125.44
-
93
... More
Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
125.71
-
110
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
408.9
-
363
... More
(f) 25 mm to 30 mm shuttering without staging in foundation
121.6
-
205
... More
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
125.44
-
24
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
8.56
-
71269
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding
shuttering)
In ground floor
(A) [Pakur Variety]
(a) 1:3:6 proportion
25.69
-
4830
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.Roof & above
68.91
-
6114.29
... More
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Foundation, basement all floor, Roof & above
3.78
-
5632.57
... More
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
10.04
-
5081
... More
25mm thk Damp Proof Course with cement concrete (1:1.5:3) (with graded stone aggregate 10mm normal size) & painting the top suface with a coat of bitumen [VG 40] using 1.7kg. Per Sqm. Including heating the bitumen & cost & carriage of all materials complete. [ Bitumen to be supplied by the Agency]. Foundation, basement all floor, Roof & above
20.55
-
261
... More
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
47.28
-
5035
... More
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Foundation, basement all floor, Roof & above
136.92
-
664
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
316.65
-
155
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
764.54
-
136
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
145.28
-
123
... More
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, Stair, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]. all floor, Roof & above.
20.84
-
1143
... More
Toilet Floor: Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength 1200 N. all floor, Roof & above.
14.8
-
906
... More
Supplying , fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4 nos. of key stones (10 mm. fixed with araldite at back of each tiles & finishing the joints with the white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface ,if necessary or by synthetic adhesive & grout materials etc. (Anti skid) with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm. & joint filling using white cement slurry @0.20kg./Sqm. Area of each tile above 0.09sqm. colour decorative. all floor, Roof & above.
48.83
-
1094
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) any floors. Roof & above. ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)
117.25
-
1566
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: malayasian. any floors. Roof & above.
0.45
-
75572
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf).any floors. Roof & above.
18.11
-
3955
... More
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
54
-
25
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
32
-
74.15
... More
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
9
-
117
... More
Anodised aluminium grip handle with base plate of approved quality fitted & fixed completed.With base plate. 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick Any floors. Roof & above.
9
-
177
... More
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
9
-
233
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: . 100mm long x10mm dia bolt. Any floors. Roof & above.
9
-
53
... More
Anodised aluminium decorative handle (hexagonal/ftuled) of approved quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. All floor & roof
18
-
100
... More
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
1
-
1899
... More
Godrej Hydraulic door closer fitted and fixed complete. Heavy type. Any floors. Roof & above.
9
-
2064
... More
Providing, fitting and fixing in position glazed casement/ 2 track or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float/smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
125.4
-
448
... More
Supplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
364.8
-
94
... More
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above. In ground floor.
4.2
-
4330
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matt finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx). any floors. Roof & above.
7.5
-
9077
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.. any floors. Roof & above.
50.64
-
38
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
29.1
-
29
... More
Supplying and applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
316.65
-
45.1
... More
Supplying, and, applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
316.65
-
97
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
909.82
-
33.7
... More
Supplying,applying rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
909.82
-
122
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
909.82
-
70
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: on timber or plastered surface. With super gloss (hi gloss). Two coats (with any shade except white). any floors. Roof & above.
50.64
-
81
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shade). any floors. Roof & above.
29.1
-
77
... More
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
22.8
-
585
... More
Extra for using approved H.B netting in every third layer above in any floor
136.92
-
41
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface or as per direction of Engineer in Charge.
60
-
5.8
... More
S&P FOR WBIDC BUILDING
Supplying, fitting and fixing shower of approved brand and make. Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
1
-
1412
... More
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (Q) Ball Valve 25 mm
2
-
239
... More
Supplying, fitting and fixing bib cock or stop cock.
i) Chromium plated Bib Cock with wall flange (Equivalent to Code No.5047 & Model - Florentine of Jaquar or similar brand).
2
-
861
... More
ii) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
7
-
815
... More
ii) Supplying, fitting & fixing Chromium plated double coat Hook(Equivalent to Code No. 35761 &
Model - KUBIX of Jaquar or similar).
4
-
516
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials
a) For Exposed Work CPVC Pipes Class-I,SDR-11
i) 20 mm
20
-
143
... More
ii) 25 mm
12
-
208
... More
b) For Concealed Work CPVC Pipes Class-I,SDR-11
i) 20mm
50
-
171
... More
Supplying, fitting & fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metre below suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials) PVC Pipes (Dia) 40mm
30
-
311
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.5000 litre capacity capacity
2
-
27046
... More
Labour for hoisting plastic water storage tank. Above 1500 litre upto 5000 litre capacity. a) Upto 1st story from GL.
2
-
154
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin or oval type (Counter top with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
4
-
2208
... More
Supplying, fitting & fixing UPVC pipes All Type and fittings conforming to IS:13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen /M-Seal etc) complete. 160mm Dia
35
-
546
... More
Supplying fitting & fixing W.C. Connector (450 mm long) W / lipring
75 mm
3
-
277
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. a) With 'P' trap
3
-
1421
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) black
3
-
302
... More
Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. 600 mm X 150 mm. Salt glazed stone ware.White vitreous chinaware
6
-
138
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. C. P. Flush Pipe
3
-
295
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 465 mm X 355 mm X 265 mm
4
-
2869
... More
Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.
4
-
1132
... More
Supplying, fitting and fixing liquid soap container. Cromium plated.
6
-
393
... More
Supplying, fitting & fixing Supplying, fitting and fixing porcelain soap tray of approved make. Recessed soap tray of size 150 mm X 150 mm
4
-
338
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
4
-
613
... More
Supplying, fitting and fixing towel rail with two brackets Aluminium. 25 mm dia. & 750 mm long
3
-
187
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety
4
-
6855
... More
TERMINAL BUILDING
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
291.31
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
177.4
-
77.54
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS:
383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
104.06
-
543.51
... More
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
188.16
-
93
... More
Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
202.92
-
110
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
475.66
-
363
... More
First Floor
475.66
-
381
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. without staging in foundation
189.56
-
205
... More
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
188.16
-
24
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
13.25
-
71269
... More
First Floor
6.36
-
71749
... More
Cement concrete with graded stone chips(30mm nominal size) any floor 1:3:6 proportion. foundation, basement all floor, Roof & above
40.2
-
4830
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.Ground floor
109.23
-
6114.39
... More
First Floor
50.75
-
6209.39
... More
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Ground Floor
3.29
-
5632.57
... More
First Floor
3.29
-
5727.57
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
202.92
-
312
... More
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
21.05
-
5081
... More
25mm thk Damp Proof Course with cement concrete (1:1.5:3) (with graded stone aggregate 10mm normal size) & painting the top suface with a coat of bitumen [VG 40] using 1.7kg. Per Sqm. Including heating the bitumen & cost & carriage of all materials complete. [ Bitumen to be supplied by the Agency]. Foundation, basement all floor, Roof & above
32.09
-
261
... More
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Ground Floor
37.51
-
5035
... More
First Floor
49.36
-
5146
... More
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Ground Floor
116.13
-
664
... More
First Floor
165.04
-
676
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Ground Floor.
179.6
-
155
... More
First Floor
240.86
-
159
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. Ground Floor
560.55
-
136
... More
First Floor
609.93
-
140
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. Ground Floor
224.01
-
123
... More
First Floor
245.1
-
127
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0
kg/Sq.m].Ground Floor
50.12
-
1004
... More
First Floor
29.02
-
1016
... More
Toilet Floor: Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength 1200 N. Ground floor
57.89
-
906
... More
Supplying , fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4 nos. of key stones (10 mm. fixed with araldite at back of each tiles & finishing the joints with the white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface ,if necessary or by synthetic adhesive & grout materials etc. (Anti skid) with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm. & joint filling using white cement slurry @0.20kg./Sqm. Area of each tile above 0.09sqm. colour decorative. all floor, Roof & above.
133.08
-
1094
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) any floors. Roof & above. ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)
386.01
-
1566
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: malayasian. any floors. Roof & above.
0.48
-
75572
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf).any floors. Roof & above.
17.48
-
3955
... More
Supplying fitting & fixing fiber reinforcement polymer(FRP) composite door shutters as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. any floors. Roof & above. 32mm thick
20.09
-
2763
... More
Supplying fitting & fixing fiber reinforcement polymer(FRP) composite door frame as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. 66mmx90mm. Any floors. Roof & above.
69.3
-
497
... More
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
132
-
25
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
71
-
74.15
... More
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
23
-
117
... More
Anodised aluminium grip handle with base plate of approved quality fitted & fixed completed.With base plate. 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick Any floors. Roof & above.
23
-
177
... More
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
23
-
233
... More
Anodised aluminium decorative handle (hexagonal/ftuled) of approved quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. All floor & roof
46
-
100
... More
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
1
-
1899
... More
Godrej Hydraulic door closer fitted and fixed complete. Heavy type. Any floors. Roof & above.
8
-
2064
... More
Providing, fitting and fixing in position glazed casement/ 2 track or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float/smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
330
-
448
... More
Supplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
960
-
94
... More
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above. In ground floor.
8.4
-
4330
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matt finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx). any floors. Roof & above.
15
-
9077
... More
Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc.. any floors. Roof & above.
44.91
-
38
... More
Priming one coat on steel or other metal surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
66.3
-
29
... More
Supplying and applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
973.47
-
45.1
... More
Supplying, and, applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
973.47
-
97
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
1021.48
-
33.7
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). any floors..
1021.48
-
122
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
1021.48
-
70
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: on timber or plastered surface. With super gloss (hi gloss). Two coats (with any shade except white). any floors. Roof & above.
44.9
-
81
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shade). any floors. Roof & above.
66.3
-
77
... More
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
60
-
585
... More
Extra for using approved H.B netting in every third layer above in any floor
1170.48
-
41
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered
surface or as per direction of Engineer in Charge.
60
-
5.8
... More
S&P FOR TERMINUS BUILDING
Supplying, fitting and fixing shower of approved brand and make. Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
4
-
1412
... More
Ball Valve 25 mm
6
-
239
... More
Supplying, fitting and fixing bib cock or stop cock.
i) Chromium plated Bib Cock with wall flange (Equivalent to Code No.5047 & Model - Florentine of Jaquar or similar brand).
9
-
861
... More
ii) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
22
-
815
... More
Supplying, fitting & fixing Chromium plated double coat Hook(Equivalent to Code No. 35761 &
Model - KUBIX of Jaquar or similar).
10
-
516
... More
Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
4
-
629
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
a) For Exposed Work CPVC Pipes Class-I,SDR-11
i) 20 mm
30
-
143
... More
ii) 25 mm
20
-
208
... More
b) For Concealed Work CPVC Pipes Class-I,SDR-11
i) 20mm
130
-
171
... More
Supplying, fitting & fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metre below suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials) PVC Pipes (Dia) 40mm
65
-
311
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.5000 litre capacity capacity
4
-
27046
... More
Labour for hoisting plastic water storage tank. Above 1500 litre upto 5000 litre capacity.
a) Upto 1st story from GL.
4
-
154
... More
b) Extra for each additional floor.
4
-
72
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin or oval type (Counter top with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
9
-
2208
... More
Supplying, fitting & fixing UPVC pipes All Type and fittings conforming to IS:13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen /M-Seal etc) complete. 160mm Dia
42
-
546
... More
Supplying fitting & fixing W.C. Connector (450 mm long) W / lipring
75 mm
9
-
277
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. a) With 'P' trap
9
-
1421
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) black
9
-
302
... More
Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. 600 mm X 150 mm. Salt glazed stone ware.White vitreous chinaware
25
-
138
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. C. P. Flush Pipe
9
-
295
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 465 mm X 355 mm X 265 mm
11
-
2869
... More
Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.
9
-
1132
... More
Supplying, fitting and fixing liquid soap container. Cromium plated.
20
-
393
... More
Supplying, fitting & fixing Supplying, fitting and fixing porcelain soap tray of approved make. Recessed soap tray of size 150 mm X 150 mm
10
-
338
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
9
-
613
... More
Supplying, fitting and fixing towel rail with two brackets Aluminium. 25 mm dia. & 750 mm long
10
-
187
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety
5
-
6855
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Meter Length (c) For Exposed Work 160 mm (R.W.P)
40.5
-
612
... More
GUARD ROOM (4 NOS.)
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
72.04
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
28.8
-
77.54
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS:
383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
10.6
-
543.51
... More
Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides (upto a height of 300 mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specification described in 6.2.1. of code IS- 6313 (part -II) 1981. (Mode of measurment will be the plan area of foundation treated.)
11.56
-
93
... More
Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
16
-
110
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
148.32
-
363
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Ground floor
39.04
-
328
... More
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
23.04
-
24
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
2.41
-
71269
... More
Cement concrete with graded stone chips(20mm nominal size) any floor 1:3:6 proportion. foundation, basement all floor, Roof & above
5.52
-
4830
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade Roof & above
18.16
-
6114.39
... More
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Foundation, basement all floor, Roof & above
2.28
-
5632.57
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
16
-
312
... More
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
4.8
-
5081
... More
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
15.84
-
5035
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
87.88
-
155
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
160.8
-
136
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
16
-
123
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) & marble dust in proportion (1:2) including smooth finishing & rounding off corners including raking out joints or roughening of concrete surface & application of cement slurry before flooring works using cement @1.75kg/sqm all complete including all materials & labour. In ground floor. 3mm thick topping(High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 25mm thk. all floor, Roof & above.
80
-
264
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: malayasian. any floors. Roof & above.
0.73
-
75572
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf).any floors. Roof & above.
9.02
-
3955
... More
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
96
-
25
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
52
-
74.15
... More
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
4
-
117
... More
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
4
-
233
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: . 100mm long x10mm dia bolt. Any floors. Roof & above.
4
-
53
... More
Anodised aluminium decorative handle (hexagonal/ftuled) of approved quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. All floor & roof
8
-
100
... More
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
4
-
1899
... More
Godrej Hydraulic door closer fitted and fixed complete. Heavy type. Any floors. Roof & above.
4
-
2064
... More
Providing, fitting and fixing in position glazed casement/ 2 track or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float/smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
95.04
-
448
... More
Supplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
276.48
-
94
... More
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above. In ground floor.
13.2
-
4330
... More
Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc.. any floors. Roof & above.
32.68
-
38
... More
Priming one coat on steel or other metal surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
45.8
-
29
... More
Supplying and applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
160.8
-
45.1
... More
Supplying, and, applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
160.8
-
97
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
103.88
-
33.7
... More
Supplying,applying rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
103.88
-
122
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
103.88
-
70
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: on timber or plastered surface. With super gloss (hi gloss). Two coats (with any shade except white). any floors. Roof & above.
32.68
-
81
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shade). any floors. Roof & above.
45.8
-
77
... More
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
17.28
-
585
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface or as per direction of Engineer in Charge.
80
-
5.8
... More
TOILET BLOCK (2 NOS.)
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
140.12
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
56.04
-
77.54
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS: 383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
50.52
-
543.51
... More
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
43.2
-
93
... More
Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
91.54
-
110
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
385.87
-
363
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. IN foundation without staging
134.64
-
205
... More
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
50.7
-
24
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
6.92
-
71269
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)
In ground floor
(A) [Pakur Variety] 1:3:6 proportion. foundation, basement all floor, Roof & above
17.78
-
4830
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade Roof & above
55.52
-
6114.39
... More
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Foundation, basement all floor, Roof & above
3.16
-
5632.57
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
92.31
-
312
... More
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
17.14
-
5081
... More
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
34.88
-
5035
... More
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Foundation, basement all floor, Roof & above
38
-
664
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
228.54
-
161
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
482.12
-
136
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
100.02
-
123
... More
Toilet Floor: Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength 1200 N. all floor, Roof & above.
74.24
-
906
... More
Supplying , fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4 nos. of key stones (10 mm. fixed with araldite at back of each tiles & finishing the joints with the white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface ,if necessary or by synthetic adhesive & grout materials etc. (Anti skid) with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm. & joint filling using white cement slurry @0.20kg./Sqm. Area of each tile above 0.09sqm. colour decorative. all floor, Roof & above.
237.3
-
1094
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: malayasian. any floors. Roof & above.
0.36
-
75572
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf).any floors. Roof & above.
11.68
-
3955
... More
Supplying fitting & fixing fiber reinforcement polymer(FRP) composite door shutters as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. any floors. Roof & above. 32mm thick
17.22
-
2763
... More
Supplying fitting & fixing fiber reinforcement polymer(FRP) composite door frame as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. 66mmx90mm. Any floors. Roof & above.
59.4
-
497
... More
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
108
-
25
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI
mark. 100mm. X 75mm. X 3.50mm.
54
-
66
... More
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
18
-
117
... More
Anodised aluminium grip handle with base plate of approved quality fitted & fixed completed.With base plate. 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick Any floors. Roof & above.
18
-
177
... More
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
18
-
233
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: . 100mm long x10mm dia bolt. Any floors. Roof & above.
18
-
53
... More
Anodised aluminium decorative handle (hexagonal/ftuled) of approved quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. All floor & roof
12
-
100
... More
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
6
-
1899
... More
Godrej Hydraulic door closer fitted and fixed complete. Heavy type. Any floors. Roof & above.
6
-
2064
... More
Providing, fitting and fixing in position glazed casement/ 2 track or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float/smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
69.16
-
448
... More
Supplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
170.24
-
94
... More
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above. In ground floor.
10.56
-
4330
... More
Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc.. any floors. Roof & above.
39.32
-
38
... More
Priming one coat on steel or other metal surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
45.66
-
29
... More
Supplying and applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
299.68
-
45.1
... More
Supplying, and, applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
299.68
-
97
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
328.56
-
33.7
... More
Supplying,applying rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
328.56
-
122
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
328.56
-
70
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: on timber or plastered surface. With super gloss (hi gloss). Two coats (with any shade except white). any floors. Roof & above.
39.32
-
81
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shade). any floors. Roof & above.
45.66
-
77
... More
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
15.96
-
585
... More
hb netting.
482.12
-
41
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface or as per direction of Engineer in Charge.
120
-
5.8
... More
S&P FOR TOILET BLOCK
Supplying, fitting and fixing shower of approved brand and make. Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
4
-
1412
... More
(Q) Ball Valve 25 mm
8
-
239
... More
Supplying, fitting and fixing bib cock or stop cock.
i) Chromium plated Bib Cock with wall flange (Equivalent to Code No.5047 & Model - Florentine of Jaquar or similar brand).
12
-
861
... More
ii) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
4
-
815
... More
Supplying, fitting and fixing pillar cock of approved make CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand).
6
-
2458
... More
Supplying, fitting & fixing Chromium plated double coat Hook(Equivalent to Code No. 35761 &
Model - KUBIX of Jaquar or similar).
12
-
516
... More
Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
6
-
629
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
a) For Exposed Work CPVC Pipes Class-I,SDR-11
i) 20 mm
60
-
143
... More
ii) 25 mm
90
-
208
... More
b) For Concealed Work CPVC Pipes Class-I,SDR-11
i) 15mm
130
-
171
... More
Supplying, fitting & fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metre below suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials) PVC Pipes (Dia) 40mm
130
-
311
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.5000 litre capacity capacity
8
-
27046
... More
Labour for hoisting plastic water storage tank. Above 1500 litre upto 5000 litre capacity. a) Upto 1st story from GL.
8
-
154
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin or oval type (Counter top with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
8
-
2208
... More
Supplying, fitting & fixing UPVC pipes All Type and fittings conforming to IS:13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen /M-Seal etc) complete. 160mm Dia
80
-
485
... More
Supplying fitting & fixing W.C. Connector (450 mm long) W / lipring
75 mm
8
-
277
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. a) With 'P' trap
8
-
1421
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) black
8
-
302
... More
Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. 600 mm X 150 mm. Salt glazed stone ware.White vitreous chinaware
40
-
138
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. C. P. Flush Pipe
8
-
295
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 465 mm X 355 mm X 265 mm
12
-
2869
... More
Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.
10
-
1132
... More
Supplying, fitting and fixing liquid soap container. Cromium plated.
16
-
393
... More
Supplying, fitting & fixing Supplying, fitting and fixing porcelain soap tray of approved make. Recessed soap tray of size 150 mm X 150 mm
12
-
338
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
8
-
613
... More
Supplying, fitting and fixing towel rail with two brackets Aluminium. 25 mm dia. & 750 mm long
8
-
187
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety
10
-
6855
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick
R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. (v) For 100 users A) With Pakur variety. (SAIL/TATA/RINL)
2
-
110046
... More
CANTEEN BLOCK
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
115.95
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
46.38
-
77.54
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS:
383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
177.56
-
543.51
... More
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
72
-
93
... More
Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
314.58
-
110
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
820.61
-
390
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Ground floor
232
-
353
... More
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
407.06
-
24
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
14.31
-
71269
... More
Cement concrete with graded stone chips(30mm nominal size) any floor 1:3:6 proportion. foundation, basement all floor, Roof & above
47.25
-
4830
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.Roof & above
117.58
-
6114.39
... More
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Foundation, basement all floor, Roof & above
3.93
-
5632.57
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
314.58
-
312
... More
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
32.7
-
5081
... More
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
51.55
-
5035
... More
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Foundation, basement all floor, Roof & above
177.91
-
664
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
261.21
-
155
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
803.84
-
136
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
314.58
-
123
... More
Toilet Floor: Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength 1200 N. all floor, Roof & above.
3.38
-
906
... More
Supplying , fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4 nos. of key stones (10 mm. fixed with araldite at back of each tiles & finishing the joints with the white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface ,if necessary or by synthetic adhesive & grout materials etc. (Anti skid) with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm. & joint filling using white cement slurry @0.20kg./Sqm. Area of each tile above 0.09sqm. colour decorative. all floor, Roof & above.
15.75
-
1094
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) any floors. Roof & above. ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)
334.69
-
1566
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: malayasian. any floors. Roof & above.
0.51
-
75572
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf).any floors. Roof & above.
23.28
-
3955
... More
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
66
-
25
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
27
-
74.15
... More
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
8
-
117
... More
Anodised aluminium grip handle with base plate of approved quality fitted & fixed completed.With base plate. 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick Any floors. Roof & above.
8
-
177
... More
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
8
-
233
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: . 100mm long x10mm dia bolt. Any floors. Roof & above.
8
-
53
... More
Anodised aluminium decorative handle (hexagonal/ftuled) of approved quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. All floor & roof
16
-
100
... More
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
3
-
1899
... More
Godrej Hydraulic door closer fitted and fixed complete. Heavy type. Any floors. Roof & above.
8
-
2064
... More
Providing, fitting and fixing in position glazed casement/ 2 track or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float/smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
198
-
448
... More
Supplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
748.8
-
94
... More
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above. In ground floor.
15.18
-
4330
... More
Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc.. any floors. Roof & above.
58.7
-
38
... More
Priming one coat on steel or other metal surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
76.77
-
29
... More
Supplying and applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
340.92
-
45.1
... More
Supplying, and, applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
340.92
-
97
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
1118.42
-
33.7
... More
Supplying,applying rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
1118.42
-
122
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
1118.42
-
70
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: on timber or plastered surface. With super gloss (hi gloss). Two coats (with any shade except white). any floors. Roof & above.
58.7
-
81
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shade). any floors. Roof & above.
76.77
-
77
... More
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
54
-
585
... More
H.B Netting
177.91
-
41
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered
surface or as per direction of Engineer in Charge.
60
-
5.8
... More
S&P FOR CANTEEN BLOCK
Supplying, fitting and fixing shower of approved brand and make. Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
1
-
1412
... More
ball valve 25 mm
10
-
239
... More
Supplying, fitting and fixing bib cock or stop cock.
i) Chromium plated Bib Cock with wall flange (Equivalent to Code No.5047 & Model - Florentine of Jaquar or similar brand).
10
-
861
... More
ii) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
10
-
815
... More
Supplying, fitting & fixing Chromium plated double coat Hook(Equivalent to Code No. 35761 &
Model - KUBIX of Jaquar or similar).
2
-
516
... More
Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent. 15 mm
1
-
89
... More
Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality)
(a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
4
-
629
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
a) For Exposed Work CPVC Pipes Class-I,SDR-11
i) 20 mm
20
-
143
... More
ii) 25 mm
30
-
208
... More
b) For Concealed Work CPVC Pipes Class-I,SDR-11
i) 20mm
68
-
171
... More
Supplying, fitting & fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metre below suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials) PVC Pipes (Dia) 40mm
58
-
311
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.5000 litre capacity
2
-
27046
... More
Labour for hoisting plastic water storage tank. Above 1500 litre upto 5000 litre capacity. a) Upto 1st story from GL.
2
-
154
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin or oval type (Counter top with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
4
-
2208
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. Sink with drain board 1050 mm X 450 mm X 180 mm
3
-
5006
... More
Supplying, fitting & fixing UPVC pipes All Type and fittings conforming to IS:13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen /M-Seal etc) complete. 160mm Dia
40
-
612
... More
Supplying fitting & fixing W.C. Connector (450 mm long) W / lipring
75 mm
1
-
277
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. a) With 'P' trap
1
-
1421
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) black
1
-
302
... More
Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. 600 mm X 150 mm. Salt glazed stone ware.White vitreous chinaware
35
-
138
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. C. P. Flush Pipe
1
-
295
... More
Supplying, fitting and fixing liquid soap container. Cromium plated.
4
-
393
... More
Supplying, fitting & fixing Supplying, fitting and fixing porcelain soap tray of approved make. Recessed soap tray of size 150 mm X 150 mm
4
-
338
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
4
-
613
... More
Supplying, fitting and fixing towel rail with two brackets Aluminium. 25 mm dia. & 750 mm long
2
-
187
... More
INTERNAL DRAINAGE SYSTEM
Earthwork in excavation in drains and other structures in all sorts of soil or loose material including removing surplus spoils and debris to a maximum lead of 100m including bailing outing manually or by pumps as per specification and drawing and as directed by the Engineer.(Trench shall be kept dry by dewatering and removal of slush.) Depth of excavation not exceeding 1.5m below G.L
1725.3
-
119.27
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
383.4
-
521.07
... More
Brick work with 1st class bricks in cement mortar (1:4). In foundation and plinth.
431.33
-
5081
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (ground floor. With 1:6 cement mortar. 20 mm thick plaster
3834
-
155
... More
1.5mm thick neat cement punning.
3834
-
34
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)
In ground floor
(A) [Pakur Variety]
(a) 1:3:6 proportion.
115.02
-
4830
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved
thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of
Engineer-In-Charge.
1763.4
-
328
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.
248.4
-
6114.39
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(i) Tor steel / Mild steel. For works in foundation, basement and upto roof of ground floor / upto 4 m
19.5
-
71269
... More
Supplying, fitting and fixing in position FRP/GRP/COMPOSITE UV stabilizer Gully Pit Cover with high abrasion surface of 7mm top thicknes, density of 2KG/m³ of approved make with rim of approved make (Heavy type) (ii) 20 M.T. Gully pit cover (yard gully) with arrangement for opening of size Frame Clear Opening 450 mm X 450 mm.
Cover Out to Out 550 mm X 550 mm.
140
-
7044
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm
nominal size) excluding shuttering and reinforcement,if any, in ground floor
as per relevant IS codes.
(A) [Pakur Variety]
38.34
-
5073.54
... More
INTERNAL PATHWAY
(c) 60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base
,sub-base course & subgrade preparation.) (ii) Coloured Decorative
370.84
-
1316
... More
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel
300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (The rate is inclusive of cost of all materials, labour, hire and usage charges of machinery and all incidental charges in this
connection.)
494.45
-
530
... More
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
74.17
-
2345.85
... More
UNDERGROUND RESERVOIR
Earth work in excavation of foundation in all sorts of soil in dry and wet condition including necessary protection for earth retention of the sides of the excavated area, removal as required, complete as per specification and direction of Architect/Employer. Depth up to 1.5 m.
51
-
119.27
... More
Earth work in excavation of foundation in all sorts of soil in dry and wet condition including necessary protection for earth retention of the sides of the excavated area, removal as required, complete as per specification and direction of Architect/Employer. Depth of excavation for additional depth
beyond 1,500 mm. and upto 3,000 mm. but not
requiring shoring
40.8
-
192.38
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(Payment to be made on basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
30.6
-
77.54
... More
Filling in foundation or plinth by fine sand in layers not exceeding 150mm as by thorough saturation with water, ramming complete exceeding 150 mm as directed and consolidating the same including the cost of supply of sand. (Payment to be made on measurement of finished quantity)
8.44
-
543.51
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete
as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact
with supported earth is to be measured.) (This item
should be executed on specific direction of the
Enginner in charge). (a) Depth upto 1.5 m.
36.75
-
429
... More
(b) For additional depth beyond 1.5 m. and upto 3.00
m
29.4
-
488
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs , beams, columns , lintels curved or straight including fitting , fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
144.15
-
363
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
(i) Tor steel / Mild steel. (a) For works in foundation, basement and upto roof of ground floor / upto 4 m
2.76
-
71269
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade Roof & above
29.33
-
6114.39
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)
In ground floor
(A) [Pakur Variety] 1:3:6 proportion. foundation, basement all floor, Roof & above
2.55
-
4830
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (ground floor) With 1:6 cement mortar. 15 mm thick plaster
153
-
136
... More
Supplying & laying 250 micron polythene sheeting below P.C.C & between brick shuttering and concrete.
35.24
-
24
... More
Supplying, fitting & fixing Puddle coller of G.I. pipe (G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. Medium quality) of different diameters 450mm long, both and fully socket threaded and welded with 6mm thick M.S. plate, fitted & fixed in R.C.C. work, with all labour & materials. 150mm dia welded with 6mm thick 400mm x 400mm M.S. plate (outlet)
2
-
1844.88
... More
Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc. Note : Cement 0.152 cum per 100 sqm
153
-
34
... More
Bailing or pumping out water from foundation trenches. Double of Earth work
84.38
-
20.88
... More
Supplying, fitting and fixing in position C.I. manhole/ pit cover with rim.(a) Round (ii) 450 mm X 100 mm X 25 kg (approx.)
2
-
2035
... More
TUBEWELL & PUMP (2 NOS.)
Installation of 1 No 250 mm x 150 mm dia Tubewell along with providing, testing and commissioning of Submersible pumpset.
Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system including hire charges and labour for supplying of suitable dia. Casting pipes upto full depth of tube well with necessary sockets, tools and plants, staging, force pumping set and making necessary arrangements for boring and also cost of withdrawing the casing pipes and lowering pipes, stainers, blind pipes etc. complete. (The casing pipe should have a minimum 50 mm gap in between the outside of the tube well pipe and the casing pipe).
a) For depth upto 250 meter for 150 dia. Tube well with top enlargement of 250 mm dia. i) First 50 metre
100
-
1014
... More
ii) Next 50 metre
100
-
883
... More
iii) Rest 50 metre
80
-
1055
... More
Supplying PVC strainer of approved make with adapter conforming to I.S.12818specifications. i) 150 mm dia.
36
-
768
... More
Supplying, fitting & fixing heavy type bell mouth PVC reducing socket
i) 200 mm X 250 mm
2
-
1508
... More
ii) Nipple (300 mm long), Dia 150mm
2
-
450
... More
Supplying, fitting and fixing G.I. cap at top 300 mm
2
-
723
... More
Supplying, jointing and lowering vertically uPVC threaded pipes with necessary sockets, special fittings and jointing as required including cost of all jointing materials, hire charges of tools and plants, cutting pipes to required sizes with threads as necessary and lowering the pipes within the borewell vertically as per direction of the Engineer-in-charge .
i) 150 mm nb Sch 80 and as per ASTM D1785
184
-
1420
... More
ii) 250 mm nb Sch 80 and as per ASTM D1785
60
-
2947
... More
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yeild in gallons per hour with "V" notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect.
6
-
7538
... More
Labour for making arrangement for showing vertically test including the cost for hire charges of tools and plants, scaffolding labour etc. all complete.1 x 1
2
-
916
... More
Collecting sample of water for physical bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc, complete in all respect as per direction and as per IS 10500 parameters. 1x 1
2
-
1231
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having sizefrom 2 mm to 5 mm or the size aproved by the Engineer - in- charge including cost of materials labour and equipment complete.
8
-
2031
... More
Packing the annular space between the outside of the housing pipe & the bore with puddled clay balls of approved size as per direction of the Engineer - in- charge with cost of materials & labour complete.
12
-
417
... More
Providing & fixing bottom plug as required for 150 mm dia PVC pipe including cost of materials & labour with fixing in position complete for sealing the bottom of assembly.
2
-
431
... More
Supplying, fitting & fixing 300 mm M.S housing clamp of approved quality
2
-
2235
... More
Providing 200mm centre guide.
12
-
128
... More
Geophysical investigation of the aquifer by electro logging system with all tools & plants as necessary including supply of necessary report.
2
-
8247
... More
Part B : SUBMERSIBLE PUMP & ACCESSORIES
Supply of 3 phase 5 HP horizontal centrifugal pumpset (420-180 LPM, Head 33-42 mtr approx)
4
-
19159
... More
Supplying, fitting and fixing 80 mm dia GI bend having one end threaded and socketed other end flanged with special arrangements for fitting and fixing pressure gauge.
6
-
626
... More
Supply fitting and fixing 100 mm dia pressure gauge (0 to 7 kg / sq cm minimum) with controlling cock and brass "U" syphon.
2
-
1960
... More
Supplying, fitting and fixing electrical water level guard with two pole electrodes.
2
-
998.8
... More
Supplying of GI pipe of TATA make of 80 mm dia (medium quality) including necessary sockets for column pipe. 80 mm dia
100
-
955
... More
CI sluice valve with flanged ends drilled to as per IS 1358/1962 and having all cost component as per IS 780/1971 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT / sq.cm. spindle nut valve and seat faces of hardware resisting manufactured from best quality gun metal, conforming to IS 780/1971 paint tested to 21 kg. (Hydraulic Pressure) sq.cm. valve opening to anticlockwise direction fitted and fixed complete. i) 80 mm dia
2
-
4557
... More
Supplying, fitting and fixing wrought iron flange of approved quality with washer and bolts as per standard joints complete in all respects. i) 80 mm dia
4
-
327
... More
Supplying, fitting & fixing approved brand 32 mm PVC waste pipe, with coupling at one end fitted with necessary clamps
750 mm long
32
-
69
... More
Earthing with 50 mm. (2") dia. Galvanised iron pipe 3.64 mm. thick x 3 Mtr. (10') long and 1x4 SWG G.I. wire (4 Mts. Long) 13 mm. (1/2") dia x 80 mm. (3") long G.I. bolts double nuts double washers including S/F 15 mm. dia. G.I. pipe protection (1 Mtr. long) to be fitted with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65 Mts. (12') below the ground level and restoring the surface duly rammed. (Tata M)
12
-
1524
... More
ELECTRICAL ROOM (2 NOS.)
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
35.76
-
119.27
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
14.3
-
77.54
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS: 383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
15.36
-
543.51
... More
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
11.52
-
93
... More
Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
32
-
110
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
119.84
-
363
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Ground floor
38.4
-
335
... More
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
18
-
24
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
2
-
71269
... More
Cement concrete with graded stone chips(30mm nominal size) any floor 1:3:6 proportion. foundation, basement all floor, Roof & above
6.16
-
4830
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding
shuttering)
In ground floor
(A) [Pakur Variety]
(a) 1:3:6 proportion
5.78
-
4964.86
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.Roof & above
17
-
6114.39
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
32
-
312
... More
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
4.68
-
5081
... More
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
20.1
-
5035
... More
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Foundation, basement all floor, Roof & above
12.16
-
664
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
95.76
-
155
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
161.46
-
144
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
32
-
123
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) & marble dust in proportion (1:2) including smooth finishing & rounding off corners including raking out joints or roughening of concrete surface & application of cement slurry before flooring works using cement @1.75kg/sqm all complete including all materials & labour. In ground floor. 3mm thick topping(High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 25mm thk. all floor, Roof & above.
32
-
264
... More
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above. In ground floor.
18.92
-
4330
... More
Priming one coat on steel or other metal surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
28.38
-
29
... More
Supplying and applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
161.46
-
45.1
... More
Supplying, and, applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
161.46
-
98.08
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
95.76
-
33.7
... More
Supplying,applying rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
95.76
-
122
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
95.76
-
70
... More
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shade). any floors. Roof & above.
28.38
-
77
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered
surface or as per direction of Engineer in Charge.
81
-
5.8
... More
INTERNAL PARKING & DRIVEWAY
Granular Sub-base with Graded Material (Table: 400-1)
B. By Mix in Place Method :
Construction of Granular Sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor Grader or prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
10476.46
-
1876.98
... More
Wet Mix Macadam Base Course :
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting,
guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
10476.46
-
2345.85
... More
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm
respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel
300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel
laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 of
Specifications for Road & Bridge Works of MoRT&H (5th Revision). (The rate is inclusive of cost of all
materials, labour, hire and usage charges of machinery and all incidental charges in this connection.)
A - Using Concrete Mixer
1584
-
530
... More
100 mm thick interlocking designer concrete paver block M-50 grade for hightraffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 15658- 2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge.
[Note: Subgrade CBR shouldnot be less than 5]] Colour Decorative
41905.85
-
1896
... More
BOX CULVERT
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .
I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a) Depth upto 3.0 metre
i) With pumping out water including shoring as required.
58.59
-
124
... More
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge.
4.75
-
644.5
... More
Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control,
sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. a . PCC Grade M15 (Using conc mixer)
1.9
-
4706.55
... More
Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications. I. RCC Grade M30 (Using Concrete Mixer )
11.76
-
5892.91
... More
Furnishing and Placing Reinforced Cement concrete in Super-structure with pakur coarse aggregates of appropriate nominal size and grading, fine aggregate (coarse sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technical specifications.
2
-
6739.91
... More
B(I) . RCC Grade M30 (Using Concrete Mixer )
For solid slab super-structure,
a) Height upto 5m
Construction of R.C.C. Crash-barrier at the edges of road over bridge deck with M-30 grade concrete and HYSD reinforcement conforming to IRC-21 and dowel bars 25 mm dia, 450 mm long and expansion joints filled with pre-moduled asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular no. RW/NH-33022/I/94-DO III dt. 24.06.1994 as per dimensions in the approved drawings and at locations directed by the Engineer all as specified .
8
-
3560.97
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.
i) Foundation
1.48
-
64875.56
... More
ii) Superstructure
0.25
-
64875.56
... More
Hire & labour charges for shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or rainforced concrete works in all sorts or minor structure including culvert,box culvert ,cross drain etc.The rate is inclusive of fitting,fixing and striking out after completion of work as per specification and direction. (b) where staging is not required
52.16
-
214
... More
ELECTRICAL WORKS
L.T. MAIN PANEL(ESSENTIAL) PART-A
Supply, Installation & testing of and commissioning of LT 200A Main Panel Board of 2mm sheet steel enclosed compartmentalised cubicle type dust & vermin proof suitable for indoor installation and extensible on either side. It should be branded of make Siemens/Legrand/ABB/ with manufacturer`s LOGO and have the following:- INCOMER -1 nos 125 A 415 V TPN main switch with fuse. L&T/HAVELLS/ANCHOR, (i)PROTECTION: .OVER LOAD & SHORT CIRCUIT, (ii)INSTRUMENT- (iii)Digital Power Manager with CTs of ratio 250/5A for 3 Ph. 4 wire system , indicating Ampere, voltage, power factor with all accessories protection fuses,phase indicating lamps etc. Make - L&T/HAGER, (iv)INDICATION ON,OFF,TRIP, (v)4 bar Al busbar 200A , OUTGOING FEEDERS- 2 NOS 32A 220 V DP with fuse main switch. L&T/HAVELLS/ANCHOR, 5 NOS 16A 220 V DP with fuse main switch. L&T/HAVELLS/ANCHOR, 5 NOS 32A 415 V TPN with fuse main switch. L&T/HAVELLS/ANCHOR, 1 NOS 63A 415 V TPN with fuse main switch. L&T/HAVELLS/ANCHOR, The board should be complete with fabrication of all frames, indicating lamps, danger board, interconnection with PVC insulated armoured cable of appropriate sizes. All cables, conduits, flexible conduits should be neatly laid and armoured should be finished properly.
1
-
38839.29
... More
L.T. MAIN PANEL(ESSENTIAL) PART-B
Supply, Installation & testing of and commissioning of LT 200A Main Panel Board of 2mm sheet steel enclosed compartmentalised cubicle type dust & vermin proof suitable for indoor installation and extensible on either side. It should be branded of make Siemens/Legrand/ABB/ with manufacturer`s LOGO and have the following:- INCOMER -1 nos 125 A 415 V TPN main switch with fuse. L&T/HAVELLS/ANCHOR, (i)PROTECTION: .OVER LOAD & SHORT CIRCUIT, (ii)INSTRUMENT- (iii)Digital Power Manager with CTs of ratio 200/5A for 3 Ph. 4 wire system , indicating Ampere, voltage, power factor with all accessories protection fuses,phase indicating lamps etc. Make -L&T/HAGER , (iv)INDICATION ON,OFF,TRIP, (v)4 bar Al busbar 200A , OUTGOING FEEDERS- 3 NOS 32A 220 V DP with fuse main switch. L&T/HAVELLS/ANCHOR, 4 NOS 16A 220 V DP with fuse main switch. L&T/HAVELLS/ANCHOR, 4 NOS 32A 415 V TPN with fuse main switch. L&T/HAVELLS/ANCHOR, 3 NOS 63A 415 V TPN with fuse main switch. L&T/HAVELLS/ANCHOR, The board should be complete with fabrication of all frames, indicating lamps, danger board, interconnection with PVC insulated armoured cable of appropriate sizes. All cables, conduits, flexible conduits should be neatly laid and armoured should be finished properly.
1
-
45535.71
... More
FEEDER PILLER PART-A
1. INCOMING, 1 NOS 63A 415 V TPN with fuse main switch. L&T/HAVELLS/ANCHOR, 2. OUTGING, 3 NOS 32A 415 V TPN main switch with fuse. L&T/HAVELLS/ANCHOR, 3. 4 bar Al busbar 100 A, The board should be complete with fabrication of all frames, danger board, interconnection with PVC insulated armoured cable of appropriate sizes. All cables, conduits, flexible conduits should be neatly laid and armoured should be finished properly.
1
-
22142.86
... More
E.I. WORKS
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, on wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (for MCBDB's)
i) 2+10 way Enclosure (LTSD12N) L&T/ABB/SIEMENS
3
-
1518.62
... More
ii) 2+6 way Enclosure (LTSD08N) -L&T/ABB/SIEMENS
8
-
1234.2
... More
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (for DB's) i) 2+4 way Enclosure (LTSD06N) -L&T/ABB/SIEMENS
9
-
1136.65
... More
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 4 way Enclosure (LTT04N) -L&T/ABB/SIEMENS
3
-
2410.89
... More
Supplying and fixing 240/415 V 80A FP ISOLATOR of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection - L&T/ABB/SIEMENS (INCOMING OF TPMCB)
3
-
854.29
... More
Supplying and fixing 240/415 V 63A DP ISOLATOR of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection L&T/ABB/ SIEMENS (INCOMING OF MCBDB)
3
-
412.77
... More
Supplying and fixing 240/415 V 40A DP ISOLATOR of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.-L&T/ABB/SIEMENS (INCOMING OF DB)
17
-
323.44
... More
Supplying and fixing 240/415 V 6- 16A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.-L&T/ABB/ SIEMENS (OUTGOING OF MCBDB/ DB'S)
150
-
164.29
... More
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand
approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required
i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (from TPN TO SPN)
175
-
152.99
... More
ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (from AC, POWER PLUGS)
125
-
122.19
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish
Average run 6 mtr
60
-
800.89
... More
Average run 7 mtr
35
-
897.41
... More
Average run 8 mtr
50
-
992.9
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top
cover plate flushed in wall incl. mending good damages to original finish, 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
Average run 6 mtr
45
-
916.92
... More
Average run 7 mtr
50
-
1019.6
... More
Average run 8 mtr
64
-
1122.28
... More
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 40 mm dia (when armoured cable crossing roads/ driveway)
170
-
252.59
... More
65 mm dia (when armoured cable crossing roads/ driveway)
70
-
427.14
... More
100 mm dia (when armoured cable crossing roads/ driveway)
50
-
771.12
... More
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed for 4C 16/ 2C 6/ 2C 10 sqmm aluminium armoured cable
225
-
166.34
... More
Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed for 4C 16/ 2C 6/ 2C 10 sqmm aluminium armoured cable
200
-
309.06
... More
Laying of three cables upto 35 sqmm in an underground trench in single tier formation (horizontal) the trench size : 915 mm x 760
mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between the cables including filling the space between the bricks
and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed for 4C 16/ 2C 6/ 2C 10 sqmm aluminium armoured cable
378
-
449.73
... More
Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. i) for 4C 16 sqmm aluminium armoured cable
16
-
97.54
... More
ii) for 2C 10 sqmm aluminium armoured cable
6
-
34.91
... More
iii) for 2C 6 sqmm aluminium armoured cable
14
-
32.86
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
i) for 2 core 6 sq.mm.
14
-
69.82
... More
ii) for 2 core 10 sq.mm.
6
-
118.08
... More
iii) 4 core 16 sq.mm.
16
-
135.54
... More
EARTHING INSTALLATION - WITH PIPE ELECTRODE
Earthing with 50mmdia GIpipe 3.64 mm thick x 3.04Mts. longand 1x4 SWGGI (HotDip) wire (4Mts. long), 13 mmdia x80mm long GI bolts, double nuts, double washers incl. S&F 15mmdia GI pipe protection (1Mts.long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65Mts. below the ground level as below: By TATA-Medium GI pipe (2 nos for main 2 LT panel, 2 nos for each high mast (total 7 nos), 1 nos for each building except electric room)
31
-
1564.82
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
5
-
160.54
... More
Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil
35
-
220.76
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 6 SWG
15
-
13.35
... More
Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For 30 cm (12") Exhaust fan
35
-
112.95
... More
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")
35
-
337.81
... More
Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan
bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from
entering the box.
78
-
178.66
... More
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
78
-
67.77
... More
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.
50
-
242.32
... More
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
28
-
397.37
... More
Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener
181
-
102.68
... More
Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping
arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
8
-
828.62
... More
Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting
2
-
1370.76
... More
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.-ON BOARD
62
-
221.79
... More
Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works- FOR 6 MODULE FOR 1. Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required 2. Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.3. Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 4. Supply & Fixing 240 V 16 A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required
5
-
836.83
... More
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (FOR AC)
4
-
805
... More
Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no.suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works (175 mm x 100 mm x 65 mm) FOR Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.
20
-
357.32
... More
Supply of 5 W bracket light with item desctiption AELIUS LX LED LAMP 5 W BC 6500L
26
-
107.14
... More
Supply of Crompton Cat no. LCTL-9-CDL durable LED battern light with decorative end caps.
112
-
353.57
... More
Supply of Crompton Cat no. LCTL-18-CDL durable LED battern light with decorative end caps.
43
-
392.86
... More
Supply of Crompton Cat no. LSTS-25-CDL highly effective and efficient street light
2
-
1807.14
... More
Supply of Crompton Cat no. LPTM-40-CDL IP65 rated LED post top with moon light effect.
8
-
6285.71
... More
Supplying ISI marked metal body 300mm sweep 1400 rpm exhust fan. MAKE- USHA/EPC
35
-
1522.32
... More
Supplying ISI marked energy star 1200mm sweep ceiling fan MAKE- ORIENT/ CROMPTON/ USHA
78
-
1973.21
... More
Supply of 1.1 KV grade 2 core 6 sqmm aluminium armoured cable. POLYCAB/ MESCAB/ HAVELLS
610
-
86.61
... More
Supply of 1.1 KV grade 2 core 10 sqmm aluminium armoured cable. POLYCAB/ MESCAB/ HAVELLS
100
-
102.68
... More
Supply of 1.1 KV grade 4 core 16 sqmm aluminium armoured cable. POLYCAB/ MESCAB/ HAVELLS
835
-
152.68
... More
Supply of 1.1 KV grade 4 core 50 sqmm aluminium armoured cable. POLYCAB/ MESCAB/ HAVELLS
35
-
329.46
... More
Supply of 1.5 T split type AC with rotary compressor, 4500 Kcal/kr cooling capacity nominal, 700 cum/hr air flow, 5 star rating, angle structure, PVC pipe for condensed water, refrigaration pipe including supply, installation, testing, commissioning charges, all goverment chages. MAKE- CARRIER/ MITSUBISHI/ DAIKIN
4
-
30263.39
... More
Installation of above 1.5 T split type AC with all accessories
4
-
2142.86
... More
Supply of CROMPTON cat no. 4W17D3J-VX single phase 3 HP 17 Stages 4" Borewell Submersible Pump ( 98-47 M head, 50-130 LPM)
2
-
18638.39
... More
Supply & fixing of DOL starter to operate 3 HP submersible pump MAKE- L&T/ KSB/ CROMPTON
2
-
3883.93
... More
Supply of 3C 4 sqmm Submersible cable [Total for 2 nos site] POLYCAB/ MESCAB/ HAVELLS
200
-
144.64
... More
Supply of 20M high mast shaft in three sections suitable for wind speed (as per IS 875), with raising lowering system comprising, head frame, luminaries carriage suitable to install 18 nos luminaries in asymmetrical arrangement , double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle,junction box, lightening finial. Wiring material,powercables between panel and mast, MCB in base compartment are not included. BAJAJ/ BPP/ JK POLE
7
-
133928.57
... More
Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template.
7
-
13392.86
... More
Supply & Fixing of non-integral floodlight luminaries with 350 W LED (CAT NO. 169839) and its control boxes. BAJAJ/ PHILIPS/ HAVELLS
84
-
25142.86
... More
Supply & Fixing including wiring of twin dome aviation obstruction lights of type BJAOL 2 with two nos no. 100 W GLS lamps. BAJAJ/ PHILIPS/ HAVELLS
7
-
2232.14
... More
Supply of outdoor stand mounted feeder pillar with incomer 32A FP and 2 X 16A TP+N MCCB (L&T/ABB/SIEMENS) submain, 12 nos. 10A BDB contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 4C 16 sq. mm and outgoing 12 X 4.0 sq. mm copper wire with terminals.
7
-
22321.43
... More
Construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sq mtr at 2 metre depth with all materials and labour.
7
-
71428.57
... More
Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexiblecable of suitable copper conductor cores of 4.0 sq.mm, lugs, MCB and all labour.
7
-
17857.14
... More
Installation of the mast feeder pillar by grouting the stand in concrete.
7
-
1339.29
... More
S & F Aluminium lightning conductor
7
-
1785.71
... More
S & F of 4 nos buffer at corner portion of of each high mast foundation
7
-
3767.86
... More
FIRE FIGHTING WORKS
Supplying CO2 type fire extinguisher (ISI MARKED) of 9 kg in with all fixtures.
20
-
8132.96
... More
Supplying CO2 type fire extinguisher (ISI MARKED) of 4.5 kg in with all fixtures.
30
-
3978.08
... More
Supplying ABC type fire extinguisher (ISI MARKED) of 4.0 kg in with all fixtures.
16
-
1105.02
... More
Fixing of CO2 & ABC type fire extinguisher (ISI MARKED) of 4.0 kg, 4.5 kg & 9 kg with iron clamp, nuts, boalts etc. in with all fixtures.
66
-
176.8
... More
Supply of fire Bucket
100
-
123.76
... More
Supply of fire Bucket stand fit for at least 4 fire bucket
25
-
1215.52
... More
Fixing of fire Bucket stand fit for at least 4 fire bucket
25
-
176.8
... More
GST @ 12%
1
-
21725994.91
... More
LABOUR CESS @1%
1
-
2027759.52
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements