West Bengal Electronics Industry Development Corporation Limited Tender
... More
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal Electronics Industry Development Corporation Limited - WEBEL Tender
Solid Waste Management
Eprocure
Opening Date26 Aug 2023
Closing Date11 Sep 2023
Tender Amount₹ 6,93,00,000
Costs
EMD
₹ 13,86,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_WEBEL_560739_1Bid Award Id
ViewTender No
07/Webel/IDM/e-Waste/23-24/08Tender Authority
West Bengal Electronics Industry Development Corporation Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work). With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth.
3260.81
-
-
... More
Filling in foundation or plinth by fine sand (Grading Zone III as per IS:383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
575.44
-
-
... More
Supplying and laying Polythene Sheet (150gm / sqm) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches
4545.11
-
-
... More
Antitermte treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing Imidaclopride emulsifiable concentrates (105ml in 50 litres) with water at the rate of 5 Litres per sq.m of the surface before sand bed or sub grade is laid. Hole upto 50mm. to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm diaetre mild steel rod on the surface to facilate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in 7.2.3 of code IS-6313 (part-II) 2013. (Mode of measurment will be plan area of plinth treated.)
3900
-
-
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. Pakur variety.
92.49
-
-
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
4545.11
-
-
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix formula. In ground floor and foundation. Pakur Variety [using concrete mixture]. M 25 Grade
260.42
-
-
... More
Supplying fitting & fixing of roofing sheet of colur 0.45mm base metal Thickness (BMT) (0.53mm Total P Thickness excluding paint (TPT) of 700mm effective cover width, 43mm deep rip spaced at 233mmc/c along with microstiffeners perpendicular to ribs for strength. the steel sheet shall have minimum yield strength of 550MPa, Metallic Coated Of Zincalume, Aluminium Zinc Alloy AZ150, Conforms To IS15961, Pre-Painted With Inorganic Pigments super durable polyster (SDP) colorbond xrw(Xterior roofing & walling) with higher SRI (Solar reflective index) value Theramatech technology conforms to IS 15965 class 3. The Sheets shall be fixed to every purlin by means of clips-KL70. The clip Kl-70 shall be fastened with nominal 40µm zinc coated or nominal 25µm zinc tin alloy coated, sheet shall be of same parent of coil. The profile sheet, fastener size etc. shall be approved by the concern authority. The measurement shall be based on finished/covered surface area.
5290.88
-
-
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor steel. For works in foundation, basement and upto roof of ground floor / upto 4 m
81.43
-
-
... More
Hire and labour charges for shuttering with centreing and necessary staging. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thick approved quality plyboard shuttering in any concrete work.
778.67
-
-
... More
Brick work with 1st class bricks in cement mortar (1:4) In foundation and plinth
17.72
-
-
... More
Brick work with 1st class bricks in cement mortar (1:6). In superstructure.
-
-
-
... More
Ground
70.86
-
-
... More
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Foundation, basement all floor, Roof & above
-
-
-
... More
Ground
135.54
-
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar ic. rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, ic.throating, nosing and drip course where necessary. With 1:6 cement mortar. 20 mm thck plaster in ground floor
384
-
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster
533.1
-
-
... More
Neat cement punning about 1.5mm thick in wall, dado, window
sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m
3889.2
-
-
... More
Supplying & laying of approved brand of scratch proof, semi flexible P.V.C. blended homogeneous marble Vinyle flooring in tiles conforming to IS:3461, fixing with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge. 2 mm thick
192.39
-
-
... More
Toilet Floor: Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength 1200 N. all floor, Roof & above.
14
-
-
... More
Supplying , fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4 nos. of key stones (10 mm. fixed with araldite at back of each tiles & finishing the joints with the white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface ,if necessary or by synthetic adhesive & grout materials etc. (Anti skid) with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm. & joint filling using white cement slurry @0.20kg./Sqm. Area of each tile above 0.09sqm. colour decorative. all floor, Roof & above.
162.16
-
-
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: local. any floors. Roof & above.
0.47
-
-
... More
M.S. structural works in columns, beams, MS plate etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For Structural Works in Roof Trusses, other structure etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m.
263.25
-
-
... More
Supplying, fitting, fixing bolts with nuts, washer: 20 to 25 mm dia bolt. Length above 75 mm and upto 150 mm.
51
-
-
... More
Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. 25 mm dia bolt. 750 mm long
340
-
-
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
22.48
-
-
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : Two coats (with any shade except white)
22.48
-
-
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. Two coats
384
-
-
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Super Protective 100% Acrylic Emulsion.
384
-
-
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
533.1
-
-
... More
Supplying, and, applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.One Coat
533.1
-
-
... More
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
533.1
-
-
... More
Supplying solid flush type doors of deluxe decorative (decorative laminate or PU polish both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in all floor: 25mm thick shutters (single or double leaf)
18.81
-
-
... More
Supplying fitting & fixing fiber reinforcement polymer (FRP) composite door shutters as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. any floors. Roof & above. 32mm thick
14.85
-
-
... More
Supplying fitting & fixing fiber reinforcement polymer (FRP) composite door frame as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. 66mmx90mm. Any floors. Roof & above.
46.35
-
-
... More
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete (1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
144
-
-
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
96
-
-
... More
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
15
-
-
... More
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm
48
-
-
... More
Anodised aluminium aldrop / sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
30
-
-
... More
Anodised aluminium barrel/ Tower/ Socket bolt/sliding Hasp bolt ( Full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted& fixed with cadmium plate serews. 225mm long x 12mm dia. bolt. Any floors. Roof & above.
15
-
-
... More
Anodised aluminium barrel/ Tower/ Socket bolt/sliding Hasp bolt ( Full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted& fixed with cadmium plate serews. 100mm long x 10mm dia. bolt. Any floors. Roof & above.
18
-
-
... More
Supplying 6 levers Crystal Satine Mortice Lock with pair handle, keys & plate including fitting & fixing complete. All floor & roof
30
-
-
... More
Supplying Fitting Hydraulic door closer fitted and fixed complete.Heavy type. All floor & roof
30
-
-
... More
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding /Ventilator or case ment Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film. Natural white. Note: For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.
87.35
-
-
... More
Supplying, fitting & fixing two pointed nose aluminium handle including fitting & fixing. any floors. Roof & above.
49
-
-
... More
Supplying, fitting & fixing Aluminium peg stay 300mm long including fitting fixings
49
-
-
... More
Suplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
1746.9
-
-
... More
Supplying bubble free float glass of approved make and brand conforming to IS : 2835-1987. 4mm thick coloured / tinted / smoke glass.
87.35
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot, hinges & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings including locking arrangement , all complete as per direction of Engineer-in-charge. All floors & roof
15.8
-
-
... More
Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete
22.48
-
-
... More
Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U- 1520).
414
-
-
... More
Supplying, fitting & fixing fire resistant door frame and shutter conforming to IS:3614, tested and certified as per laboratory approved by Engineer-in-charge, of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) including panic device duly filled with vermuculite based concrete mix, suitable for mounting 120 minutes fire rated door shutters. The frame is fitted with intumescent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with back plate bracket and anchor fastener of approved size and make. Rubber door silencers should be provided on striking jamb. Supplying, fitting & fixing fire resistant Door leaf of 46 mm thick fully flush double skin glazed fire resistant door shutters with or without vision lite, of 120 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 18 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled heat-resistant phenolic resin bonded insulation material (honeycomb craft) and fixing with necessary stainless steel ball bearing hinges of approved make. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturer recommendation with a beeding and screw from inside. The glass should be 6mm clear borosilicate fire rated glass of relevant rating. All door and frames shall be finished with polyurethene aliphatic grade paint of approved colour including applying a coat of approved brand fire resistant primer. The door leaf and frame shall have passed minimum 250 hours of salt spray test. Rate should include supply and installation complete as per direction of Engineer-in-charge. 2 hour Fire rated door single leaf Size 1200mmx2180mm
2
-
-
... More
Supplying, fitting and fixing the partition, frame will be made with rectangular steel tube of size 50mm x 25mm with wall thickness not less than 1.00mm. The vertical members duly welded to the horizontal members shall be placed between 1000mm to 1200mm apart the entire partition frame will be securedly fixed to the wall, ceiling and floor using rawlplug or wooden gutties and screws etc.the framewill be painted with synthetic paint, the section of the partition frame will then fitted with PRINTED LAMINATED P.V.C extruded hollow section of size 100mmx25mm. panel with approved quality fixed in the place by means of P.V.C extruded beading on both sides or P.V.C extruded angles (20mmx18mm) on one side and P.V.C extruded beading (9mmx9mm) on other side ,angle/beading will be fixed to the steel frame by 19mm (nos.6) self tapping steel screw placed at an interval of 450mm and complete in all respect as per direction of Engineer-in-Charge with all labour and materials
110
-
-
... More
VDF Flooring. Non-metallic surface powder floor hardener. Surface Preparation : The base M25 concrete should have a minimum cement content of 300 kg/m3. The concrete mix should be designed to minimise segregation and bleeding. Free water cement ratios of less than 0.55 are required. The concrete should have a slump of between 75 and 100 mm.
-
-
-
... More
All concrete floors shall be surfaced or broadcast with Hardtop Standard in two layer when concrete still in fresh state and final finish with power floater machine, a non-metallic monolithic surface floor hardening compounds containing rust free, hardwearing aggregates. The aggregates shall have a Moh's hardness of not less than 8 for Hardtop Standard. Properties of Hardtop Standard shall possess a compressive strength of 50N/mm2 when tested as per IS: 516-1959. Hardtop Standard is applied for different types of industrial use. Heavy Duty 7.0Kg/Sqm respectively. Considering Medium Duty @5kg per sqm
-
-
-
... More
Application of VDF Floor will be done over RCC floor. The works are to be done as per the technical specifications of the approved materials by the Client and executed by the authorised applicator. The works is a complete work of VDF flooring including all material, machinery, labour, shuttering, etc. as per the direction of the Engineer-in-charge
-
-
-
... More
VDF Flooring 160 mm thick
2400
-
-
... More
VDF Flooring 230 mm thick
1500
-
-
... More
High build, solvent free epoxy resin floor coating 0.5 mm thick
-
-
-
... More
The total dry flm thickness of the coating shall be a minimum of 400 microns and shall have a compressive strength of 70 N/mm2, flexural strength of 40 N/mm2 and a tensile strength of 20 N/mm2. The floor shall be prepared and the coating mixed and applied in accordance with the manufacturer’s current data sheet. To be applied as a floor coating system comprising of two top coats, each coat of minumum 200 microns
-
-
-
... More
Surface preparation These should normally have been placed for at least 28 daysand have a moisture content of less than 5%. Floors shouldbe sound and free from contamination such as oil and grease, mortar and paint splashes or curing compound residues.Excessive laitance can be removed by the use of mechanical methods. Dust and other debris should then be removed by vacuum cleaning. The works are to be done as per the technical specifications of the approved materials by the Client and executed by the authorised applicator. The works is a complete work of Epoxy Coating including all material, machinery, labour, etc. as per the direction of the Engineer-in-charge
3900
-
-
... More
Supplying, fitting and fixing shower of approved brand and make. Chromium plated Rose shower with revolving joint and 150 mm long shower arm
4
-
-
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
-
-
-
... More
25 mm
4
-
-
... More
20 mm
5
-
-
... More
32 mm
5
-
-
... More
40 mm
5
-
-
... More
50 mm
3
-
-
... More
Supplying, fitting and fixing bib cock or stop cock.
-
-
-
... More
Supplying, fitting & fixing CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand
4
-
-
... More
Chromium plated Bib Cock with wall flange (Equivalent to Code No.5047 & Model - Florentine of Jaquar or similar brand).
4
-
-
... More
Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand).
4
-
-
... More
Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
4
-
-
... More
Supplying, fitting & fixing Chromium plated double coat Hook(Equivalent to Code No. 35761 &
Model - KUBIX of Jaquar or similar).
4
-
-
... More
Supplying, fitting and fixing shower of approved brand and make. Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
4
-
-
... More
Supplying, fitting and fixing liquid soap container. Cromium plated.
5
-
-
... More
Supplying, fitting & fixing Supplying, fitting and fixing porcelain soap tray of approved make. Recessed soap tray of size 150 mm X 150 mm
4
-
-
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
4
-
-
... More
Supplying, fitting and fixing towel rail with two brackets Aluminium. 25 mm dia. & 750 mm long
4
-
-
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin or oval type (Counter top with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
4
-
-
... More
Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
4
-
-
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
-
-
-
... More
For Exposed Work CPVC Pipes Class-I,SDR-11
-
-
-
... More
20 mm
30
-
-
... More
25 mm
25
-
-
... More
32 mm
20
-
-
... More
40 mm
20
-
-
... More
50 mm
5
-
-
... More
For Concealed Work CPVC Pipes Class-I,SDR-11
-
-
-
... More
15mm
25
-
-
... More
20mm
25
-
-
... More
25mm
15
-
-
... More
Supplying, fitting & fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metre below suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials) PVC Pipes (Dia) 40mm
50
-
-
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. Sink with drain board 1050 mm X 450 mm X 180 mm
1
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length. 75 mm
50
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length. 110 mm
120
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Door Tee 75 mm.
15
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Door Tee 110 mm.
15
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Plain Y 75mm
15
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Plain Y 110 mm
15
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Double Y 75mm
10
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Double Y 110 mm
10
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Bend 450 75mm.
10
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Bend 450 110mm.
10
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Bend 87.50 75mm.
10
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Bend 87.50 110mm.
15
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Vent Cowl 75 mm
15
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Vent Cowl 110mm
15
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Pipe Clip 75 mm
150
-
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Pipe Clip 110mm
150
-
-
... More
Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect.
-
-
-
... More
80 mm
150
-
-
... More
100 mm
150
-
-
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 465 mm X 355 mm X 265 mm
4
-
-
... More
Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 750 mm long
5
-
-
... More
Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.
5
-
-
... More
Supplying, fitting and fixing urinal flush pipe fittings of approved brand. C.P. urinal flush pipe fittings range of one
4
-
-
... More
Supplying, fitting and fixing 15 mm C.P. over brass spreader.
4
-
-
... More
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap. 580 mm X 440 mm
1
-
-
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap
4
-
-
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) black.
4
-
-
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
4
-
-
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. C. P. Flush Pipe
4
-
-
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
-
-
-
... More
600 mm lomg
4
-
-
... More
750 mm long
1
-
-
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.1000 litre capacity capacity
1
-
-
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.5000 litre capacity capacity
1
-
-
... More
Labour for hoisting plastic water storage tank.Upto 1500 litre capacity. Upto 1st story from GL.
1
-
-
... More
Labour for hoisting plastic water storage tank. Above 1500 litre upto 5000 litre capacity. Upto 1st story from GL.
1
-
-
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
3
-
-
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety.
20
-
-
... More
iii) Extra for each additional depth of 150 mm or part thereof beyond initial 600 mm depth.
20
-
-
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. For 100 users. With Pakur variety
1
-
-
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
1
-
-
... More
Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) 560 mm dia.
5
-
-
... More
Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 for Rural Roads of MORD.
270
-
-
... More
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).Grading -V :
180
-
-
... More
Brick pavement with 1st class / picked jhama bricks (as per direction of Engineer in charge) with joints set closed in cement mortar 1:6 including preparation of bed by cutting or filling with ramming the filled up earth to the same profile as that of the finished pavement. Rate is inclusive of cost of supply of all materials, labour and all incidental charges in this connection. When laid in cement mortar (1:6) on the underside as well. One brick on edge pavement laid in herring bone bond pattern.
900
-
-
... More
Earthwork in excavation in drains and other structures in all sorts of soil or loose material including removing surplus spoils and debris to a maximum lead of 100m including bailing outing manually or by pumps as per specification and drawing and as directed by the Engineer.(Trench shall be kept dry by dewatering and removal of slush.) Depth of excavation not exceeding 1.5m below G.L
90
-
-
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With earth obtained from excavation of foundation
81.4
-
-
... More
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
14.25
-
-
... More
Supplying and laying cement concrete (1:2:4) for bed concrete including foamwork, consolidation and curing complete.
6.15
-
-
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work.
49.2
-
-
... More
Constructing catch pit size 450 x 375 with cement 250thk. brick work (4:1), on 100thk PCC(1:2:4) bed, inside 1:3 plaster with cement punning, 100thk rcc slab with nominal reinforcement as per standard design C.I grating (450 mm X 375 mm) with hinged gully grating with frame wt not less than 50 kg including excavation and removal of soils.
7.5
-
-
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety. (SAIL/TATA/RINL)
7.5
-
-
... More
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3)with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials. 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 150 mm dia. of approved make
2
-
-
... More
Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for non-pressure underground Drainage, Sewerage & Cross drainage application.
-
-
-
... More
150mm internal dia.
50
-
-
... More
200mm internal dia.
50
-
-
... More
250mm internal dia.
125
-
-
... More
Supply & lowering of 1 H.P Submersible Pump Motor set suitable for 415 V, 50 Hz., 3 phase Power supply in existing borewell by helping tripode & allied accessories as per direction by the EIC as per site condition.
1
-
-
... More
Supplying, fitting and fixing G.I. pipes with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) : 80 mm dia. medium quality
50
-
-
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.): 80 mm dia (Make: Approved by EIC)
3
-
-
... More
Supply of G.I Flange with suitable arrangement & necessary nuts, bolts & washers.
2
-
-
... More
Supply & fixing C.I. 80 mm non-return valve. (Make: Approved by EIC)
2
-
-
... More
Supply & fixing of pressure gauge with Syphon Bends. (Make: Approved by EIC)
2
-
-
... More
Supply & fixing of nylon rope (10 mm) with submersible pump motor set safety purpose.
3
-
-
... More
Supply & fixing of M.S. clamp with necessary nuts, bolts, washers & lock nuts etc. for holding the column pipe.
4
-
-
... More
Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required: 32 mm dia
10
-
-
... More
Supplying HDPE (Materials grade PE-80) pipes conforming to IS 4984- 1995 with latest revision & amendments if any with necessary HDPE specials (excluding cost of CIDF valves) including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder,road sub-grade and aits flank but excluding moorum laterite or sand stone / hard rock cutting with chisel required including cutting road flank/ brick pavement etc. without damaging the exisiting telephone/electrical cable line etc.(in case of damage of any type of cable line by the agency at the time of execution necessary damage charge as applicable by the respective authority will have to be brone by the agency at his own cost)upto the depth (av.) so as to maintain 1.10m.earth cushion from top of the pipe upto G.L. including loading unloading carrying lowering laying fitting fixing carefully pipes, valves and specials with the all types of jointing materials in trenches maintaining proper levels and alignment jointing the pipes and specials by butt welding/ adopting suitable method (But weld jointing with help of hydraulic tack and trimming machines, Hitter etc. for reaching at necessary melting point of HDPE pipe so that joint can be monolithic) so as to facilitate the maintenance of pipe line locally as per conventional method in future..
-
-
-
... More
250mm internal dia.
25
-
-
... More
Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc. (The rate is exclusive of the cost of posts). 75 mm. x 75 mm. x 8 g.
672
-
-
... More
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. For other Structural works like galleries etc.
1
-
-
... More
Surface dressing of ground in any kind of soil including removing of vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish
6000
-
-
... More
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work). With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth.
1200
-
-
... More
CAST RESIN DRY TYPE TRANSFORMER
-
-
-
... More
Design, manufacturing, delivery and installation including placing in position at site, testing and commissioning of 630 KVA 11/0.433 KV, 500MVA, 5 position, 50 HZ copper wound indoor cast resin dry type transformer with class H insulation & IP 23 enclosure. Vector group DYn11 having HT cable box and LT cable box with cable gland plate suitable for terminating 1.1kV grade 4 nos. 3.5C, 300 sq.mm XLPE LT cables in the LT side and 11/11 KV(E) grade 1 No. 3C. 185 sq.mm armoured al XLPE cable in the HT side including all other components as specified. Supply of all installation materials like mounting channels as per manufacturer's design high tensile bolts, nuts, washers, screws, clamps, painting, earthing, etc. as required confirming to the technical specification along with Rating & Diagram Plate, Earthing terminals, lifting lugs, off load tap link, winding temperature indicator, bidirectional rollers, NCT (1000/1A, 5P20, 20VA), digital winding temperature indicator with 2 sets of potential free contacts with suliable sensors in each phase complate in all respect as required. The off load tap link with (+)5% and (-)5% tappings in step of 2.5%. The installation shall confirm IS : 10028.1981(Part II) & amended upto date. The rate shall be inclusive of necessary civil works, mounting channels, including making all existing cable, earth bar connection etc. complete in all respect as per the direction of EIC. The transformer shall be installed in the existing transformer room in substation building.
1
-
-
... More
REMOVAL OF EXISTING TRANSFORMER
-
-
-
... More
Removal of existing 11/0.433 KV, 315 KVA Transformer from its position after disconnecting all necessary cable connections and earth connectivity and shifting its another place by arrange of necessary lifting equipments i.e. Chain, pully, block ect. as direction by EIC.
1
-
-
... More
MAIN LT PANEL
-
-
-
... More
Supply, delivery at site, erection, testing & commissioning of vertical floor mounting free standing, extendable on either side, compartmentalised cubical type panel board made of 14 SWG (2.04 mm) CRCA MS sheet suitable for 500/415V, 50 HZ, AC, 3 Phase and neutral system having the following features panel shall be designed to ensure that the weight of the components is adequately supported without deformation or loss in allignment. The doors of the cubicle shall be fitted with dust excluding neoprene gaskets with fastners for proper compression of the gaskets.
1
-
-
... More
Panel shall be multitier comparmentalised cubical type, extensible on either side and shall be treated with all anticorrosive process before painting with two coats of zine chromate primer and final approved shade of enamel paint.
-
-
-
... More
Busbars shall be of continuous rated Aluminium adequate for specified rated continuous and short circuit current covered by, proper graded heat shrinkable PVC sleeves (colour coded). Busbars shall be supported by suitable hylam/DMC/SMC or compatable insulator supports. HIgh tensile bolts and springs washers are to be provided on all busbars and suitable drilled holes for connection joints. The busbars shall have a throuth fault withstand capacity of 31 MVA, RMS symmetrical for one second. the interconnections between the busbars and the circuit breakers shall be made by continuous rated Aluminium strips suitably covered by proper graded heat shrinkable colour coded PVC sleeves. The earth busbar shall run through the length of the panel and terminated at two ends.
-
-
-
... More
All the MCCBs shall be provided with extended rotary operated mechanism. Safety interlocks are to be provided to prevent the doors of the compartments housing the MCCBs to prevent the doors to open when the MCCBs are 'ON' position.
-
-
-
... More
ACBs shall be metal clad, indoor type (in fully drawout execution) mounted on fully drawout truck with service, test and isolated position and complete with the following safety interlocks and safety shutters and padlock facility.
-
-
-
... More
It shall not be possible to move the truck in or out of cubicle when the breaker is closed.
-
-
-
... More
ACB compartment door shall be machanically interlocked so that it will not possible to close the ACB in plug position when the door is open.
-
-
-
... More
It shall not be possible to push the truck in close position if either of the safety shuntter is not free and not in close position.
-
-
-
... More
ACBs of similar rating shall be interchangeable. All control wiring in the panel shall be carried out with 1.1KV grade single core PVC Insulated copper conductors of minimum 2.5 sq.mm cross section for potential Circuits and CT circuits wiring should be neatly bunched, adequately supported, properly rouled and finally crimped. Wires are to be identified by numbered ferules at either end. Terminal blocks used are of damp type with barriered terminals and are to be numbered.
-
-
-
... More
Adequate cabling space should be available in the panel with cable supports, cable alleys, etc. Provision for top/bottom entry and termination of required number of XLPE cable shall be provided. The position of control switches, push buttons, levers, etc requiring manual operation shall be at a height not exceeding 1850 mm from the finished floor level. The rate shall also include providing and fixing space heater with thermostat control temperature conlroler including connecting the same with the system with all other accessories viz sockets. etc. required. The panel shall also be provided with cubicle illumination lamps as per requirement including connecting the same within the panel with all other accessories required.
-
-
-
... More
The panel shall also comprise of necessary meters, CTs, protection MCBs/HRC fuses, indication lamps relays, lifting bolts, label inscriptions (metalic engraved identification tags) describing the rating of the breakers, bus couplers, designation of the feeders etc including all other accessories, complete as per IE rules and reg ulations conforming to relevant IS and duly approved by Client/Consultant. The rate shall include necessary cutting chases, and mending good damages during installation. The panel shall have the following major components.
-
-
-
... More
INCOMER
-
-
-
... More
1 No 1000A, 4P electrically operated, motorised -cum-manual spring charged withdrawable type ACB of rated service voltage upto 690V, 50 HZ with manual push buttons, indications, current sensors, CTs, etc conforming to the specification and as follows:
i) Icu-50 KA (at 415V, 50 HZ), Ics=100% Icu and Icw not less than 50 KA for 1 Sec.
ii) Microprocessor based S/C, E/F & O/C releases.
iii) Rated impulse withstand voltage not less than 12 KV for main conducting paths.
iv) Auxiliary contacts, shunt trip coils etc.
-
-
-
... More
1 set - Core Balance CT with earth leakage relay.
-
-
-
... More
1 set CT Operated Digital Multifunction Meter having Cl-1 accuracy and showing (A, V, F, Maximum Demand).
-
-
-
... More
1 Set (3 Nos/Set) 1000/5-5A Dual Core cast resin type Current Transformer of CL-5P10 for protection and CL-1.0 for metering with 15VA burden each.
-
-
-
... More
1 set - CT Operated 3 O/C + 1 E/F RELAY having protection class 5P10.
-
-
-
... More
1 Set (3 Nos/Set) - Cast Resin Construction Type Potential Transformer 415 V/√3 : 110V/√3 with Cl - 0.1 accuracy with 100 VA burden with HRC fuses at primary and MCB at secondary for protection.
-
-
-
... More
1 Set (3 Nos/Set) 1000/5A cast resin type Current Transformer of CL-1.0 for APFCR with 15VA burden.
-
-
-
... More
1 set (3 nos each) RYB cluster type LED phase indlcation lamps.
-
-
-
... More
1 set (7 nos each) - SPRING CHARGED/TEST/ON/OFF/TRIP/TRIP CKT HEALTHY cluster type LED indication lamps.
-
-
-
... More
BUSBAR
-
-
-
... More
1 set - 1250A, 415V, 50HZ, 31 MVA Amps symmetrical continuous rated Aluminium busbars ( 2 Nos. 60mmX12mm for phases and 1 Nos. 60mmX12mm for neutral) mounted on suitable hylam/DMC/SMC insulators/supports with proper graded colour coded heat shrinkable PVC sleeves. Surge protection device with MPCB with rated KA.
-
-
-
... More
OUTGOING
-
-
-
... More
a) 2 Nos 400A, 4P MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
... More
2 Sets (3 Nos/Set) - 400/5A, CL-1, 15VA CTs, 1 No. Analog Ammeter (96 sq. mm.) 0-400A with Selector Switch.
-
-
-
... More
2 Sets - (3 Nos each) - ON/OFF/TRIP cluster type LED indication lamps for the above MCCBs.
-
-
-
... More
b) 3 Nos 250A, 4P MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
... More
3 Sets (3 Nos/Set) - 250/5A, CL-1, 15VA CTs, 1 No. Analog Ammeter (96 sq. mm.) 0-250A with Selector Switch.
-
-
-
... More
3 Sets - (3 Nos each) - ON/OFF/TRIP cluster type LED indication lamps for the above MCCBs.
-
-
-
... More
c) 2 Nos 125A, 4P MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
... More
2 Sets (3 Nos/Set) - 125/5A, CL-1, 15VA CTs, 1 No. Analog Ammeter (96 sq. mm.) 0-125A with Selector Switch.
-
-
-
... More
2 Sets - (3 Nos each) - ON/OFF/TRIP cluster type LED indication lamps for the above MCCBs.
-
-
-
... More
d) 3 Nos 100A, 4P MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
... More
3 Sets (3 Nos/Set) - 100/5A, CL-1, 15VA CTs, 1 No. Analog Ammeter (96 sq. mm.) 0-100A with Selector Switch.
-
-
-
... More
3 Sets - (3 Nos each) - ON/OFF/TRIP cluster type LED indication lamps for the above MCCBs.
-
-
-
... More
e) 2 Nos 100A, TPN MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
... More
2 Sets (3 Nos/Set) - 100/5A, CL-1, 15VA CTs, 1 No. Analog Ammeter (96 sq. mm.) 0-100A with Selector Switch.
-
-
-
... More
2 Sets - (3 Nos each) - ON/OFF/TRIP cluster type LED indication lamps for the above MCCBs.
-
-
-
... More
f) 2 Nos 63A, 4P MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
... More
2 Sets (3 Nos/Set) - 63/5A, CL-1, 15VA CTs, with Digital Dual source Energy Meter showing maximum demand.
-
-
-
... More
2 Sets - (3 Nos each) - ON/OFF/TRIP cluster type LED indication lamps for the above MCCBs.
-
-
-
... More
g) 2 Nos - 6-32A TPN MCCBs of rated service voltage upto 415V, Icu=10KA, Ics = 100% Icu at 440V 50 HZ, with thermo-magnetic based O/L & S/C releases.
-
-
-
... More
2 Sets - (3 Nos each) 30/5A, CL-1.0, 5VA, CTs with digital dual source energy meter showing maximum demand.
-
-
-
... More
2 Sets - (2 Nos each) - ON/OFF cluster type LED indication lamps for the above MCBs.
-
-
-
... More
1 no. 415/240V, 200VA control transformer.
-
-
-
... More
EARTH BUSBAR
-
-
-
... More
1 Set - 50 mm X 10 mm GI busbar running along the base frame covering entire length of the panel with high tensile bolts, nuts, etc. and number of drilled holes as required for earth connection at both ends.
-
-
-
... More
1 No. Danger Board.
-
-
-
... More
AUTOMATIC POWER FACTOR CONTROL PANEL
1
-
-
... More
Supply, installation, testing and commissioning of 500/415V, 50 Hz, AC, 3 Phase Automatic Power Factor Correction Panel. The panel shall be made of 14 SWG thick CRCA sheet steel, compartmentalized with metallic partitions having concealed hinges, neoprene rubber gaskets, brass wire mesh for ventilation of capacitors by providing large size of air louvers. The panel shall be free standing with MS channel base to be grouted on floor.
-
-
-
... More
Cable alley should be provided at the panel for top/bottom entry of cables, termination of incomer MCCB and also multicore copper control cables of suitable cross section from CTs in the Main LT Panel, including supplying and laying of the same control cable complete as per requirement and with horizontal/vertical copper link bars of required section and covered by proper graded colour coded heat shrinkable PVC sleeves. Each APFC Panel shall consist of following components:
-
-
-
... More
INCOMER
-
-
-
... More
1 Nos - 250A TP+NL MCCB(Category - A) of rated service voltage upto 690V, Icu=36KA, Ics = 100% Icu at 415V 50 HZ, with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
... More
1 Set (3 Nos/Set) - 250/5A, 10VA, Cl-1 Current Transformer.
-
-
-
... More
1 sets CT Operated Digital Multifunction Meter having Cl-1 accuracy and showing (A, V, F, Maximum Demand).
-
-
-
... More
1 Set - (0-250A) Flush Mounting Analogue Ammeter with Ammeter Selector Switch.
-
-
-
... More
1 Set - (0-500V) Flush Mounting Analogue Voltmeter with Voltmeter Selector Switch and HRC Fuse Protection.
-
-
-
... More
1 Set (3 Nos/Set) - Cast Resin Construction Type Potential Transformer 415 V/√3 : 110V/√3 with Cl - 0.1 accuracy with 100 VA burden with HRC fuses at primary and MCB at secondary for protection.
-
-
-
... More
1 Set (3 Nos/Set) - R-Y-B Phase Indication Lamps with 3 Nos 6A, SP, MCB Protection.
-
-
-
... More
1 set (3 nos each) - ON/OFF/TRIP cluster type LED indication lamps.
-
-
-
... More
1 set of Auto/Manual Selector Switch
-
-
-
... More
BUSBAR
-
-
-
... More
a) 1 Set - 500V, 50 Hz, (40 mm x 10 mm) for phases and (40 mm x 6 mm) for neutral TPN Aluminium bus bars, capable of withstanding STC of 50 KA for 1 second to be mounted on DMC/SMC Insulator covered with colour coded heat shrinkable PVC sleeves. Surge protection device with MPCB with rated KA.
-
-
-
... More
APFCR RELAY
-
-
-
... More
Microprocessor based 12 Stage Power Factor Controller Operated by 3 Nos CT input and measurement of 3 Phase Voltage having LCD Display. It must display power factor. The controller must also have ON/OFF/Fault Indication for each connected capacitor.
-
-
-
... More
OUTGOING
-
-
-
... More
a) 2 Nos -100A,440V HRC fuse for capcacitor duty contactor,
-
-
-
... More
b) 6 Nos -63A,440V HRC fuse for capcacitor duty contactor,
-
-
-
... More
c) 2 Nos - TP capacitor duty contactor for automatic switching of 30 KVAR Heavy Duty capacitor and 30kVAR MPP type heavy duty capacitor.
-
-
-
... More
d) 6 Nos - TP capacitor duty contactor for automatic switching of 20 KVAR Heavy Duty capacitor & 20kVAR MPP type heavy duty capacitor.
-
-
-
... More
e) 2 Nos -100A TP capacitor duty HRC fuse & contactor as Spare feeder.
-
-
-
... More
f) 10 Sets - ON/OFF Push Button for manual operation with LED Indication lamp.
-
-
-
... More
EARTH BUSBAR
-
-
-
... More
1 Set - 40 mm X 6 mm GI busbar running along the base frame covering entire length of the panel with high tensile bolts, nuts, etc. and number of drilled holes as required for earth connection at both ends.
-
-
-
... More
1 No. Danger Board.
-
-
-
... More
DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
-
-
-
... More
UP TO 160A
-
-
-
... More
6 way Enclosure (LTVD06MGN)
1
-
-
... More
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
-
-
-
... More
4 way Enclosure (607715).
4
-
-
... More
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
-
-
-
... More
2+8 way Enclosure (607711).
3
-
-
... More
2+12 way Enclosure (607712).
2
-
-
... More
Supplying and fixing 415V Four Pole 100A MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection.
1
-
-
... More
MCB
-
-
-
... More
Supplying and fixing 240/415V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection
-
-
-
... More
6-32 A SP
75
-
-
... More
6-32 A DP
5
-
-
... More
6-32 A TP
5
-
-
... More
6-32 A FP
5
-
-
... More
40A SP
5
-
-
... More
40A DP
3
-
-
... More
63A TP
4
-
-
... More
63 A FP
4
-
-
... More
100A FP
1
-
-
... More
MCB (D-CURVE)
-
-
-
... More
6-32A SP MCB (D-CURVE)
10
-
-
... More
6-32A FP MCB (D-CURVE)
10
-
-
... More
RCCB
-
-
-
... More
32A FP RCCB
5
-
-
... More
63A FP RCCB
5
-
-
... More
SPD
-
-
-
... More
Supplying and fixing Class-2 (T2) 415V, FP Surge Protective Device (SPD) of Imax 40kA/pole mounted on din rail of existing DBs and necessary connection
1
-
-
... More
POINT WIRING
-
-
-
... More
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR', with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. (Avarage run 9 mtrs)
75
-
-
... More
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR', with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.
-
-
-
... More
On Board
12
-
-
... More
Average run 4.5 mtr
10
-
-
... More
SWITCH-SOCKET
-
-
-
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
25
-
-
... More
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making ecy. connections etc.
66
-
-
... More
Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
6
-
-
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
62
-
-
... More
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
12
-
-
... More
SWITCH BOARD
-
-
-
... More
Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.
-
-
-
... More
2 module
61
-
-
... More
DISTRIBUTION WIRING
-
-
-
... More
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC flexible/rigid conduit 'FR' incl. necy. fittings as required.
-
-
-
... More
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
200
-
-
... More
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
1000
-
-
... More
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC
150
-
-
... More
2 x 84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
50
-
-
... More
CABLES
-
-
-
... More
HT CABLE
-
-
-
... More
Supply of "11/11kV(E), 3C HT XLPE(E) Al. Armoured Cable". The rate shall be inclusive of necessary supporting & clamping arrangement for laying of cables within tray/pipe/trench. The installation shall confirm IS : 1255.1983 & amended upto date.
-
-
-
... More
11KV, 3C X 185SQMM XLPE ALUMINIUM CABLE.
30
-
-
... More
HT CABLE END TERMINATION
-
-
-
... More
Supply & Fixing of "Heat Shrinkbale Indoor Type Cable End Termination Kit" suitable for the 11kV XLPE(E) cable with epoxy/polyurethane resin based kits, tapes, push on kits, multiconductor construction etc. complete. The installation shall confirm IS : 1255.1983 & amended upto date.
-
-
-
... More
11/11KV(E), 3C X 120-185SQMM XLPE CABLE END TERMINATION KIT.
4
-
-
... More
LAYING THROUGH MASONRY TRENCH
-
-
-
... More
Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand.
25
-
-
... More
LT CABLE
-
-
-
... More
Supply and delivery of 1.1 kv grade different size XLPE insulated PVC Armoured as follow:
-
-
-
... More
3.5 core 300 sq. mm. Aluminium
600
-
-
... More
3.5 core 120 sq. mm. Aluminium
80
-
-
... More
3.5 core 95 sq. mm. Aluminium
125
-
-
... More
3.5 core 50 sq. mm. Aluminium
80
-
-
... More
3.5 core 35 sq. mm. Aluminium
125
-
-
... More
3.5 core 25 sq. mm. Aluminium
340
-
-
... More
4 core 16 sq. mm. Aluminium
55
-
-
... More
4 core 6 sq. mm. Cu
50
-
-
... More
2 core 10 sq. mm. Aluminium
425
-
-
... More
Laying of three cables above 185 sqmm in an underground trench in single tier formation (horizontal) the trench size : 915 mm x 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between every two cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed
550
-
-
... More
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip)Wire, making holes etc. as necy. mending good damages and painting
820
-
-
... More
Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting
205
-
-
... More
Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting
125
-
-
... More
Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting
80
-
-
... More
COMPRESSION GLAND
-
-
-
... More
Supplying and fixing double compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
-
-
-
... More
3.5 core 300 sq. mm. aluminium cable.
6
-
-
... More
3.5 core 120 sq. mm. aluminium cable.
2
-
-
... More
3.5 core 95 sq. mm. aluminium cable.
8
-
-
... More
3.5 core 50 sq. mm. aluminium cable.
6
-
-
... More
3.5 core 35 sq. mm. aluminium cable.
6
-
-
... More
3.5 core 25 sq. mm. aluminium cable.
10
-
-
... More
4 core 16 sq. mm. aluminium cable.
4
-
-
... More
4 core 6 sq. mm. Cu cable.
5
-
-
... More
2 core 10 sq. mm. aluminium cable.
28
-
-
... More
FINISHING CABLE END
-
-
-
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
-
-
-
... More
3.5 core 300 sq. mm. aluminium cable.
6
-
-
... More
3.5 core 120 sq. mm. aluminium cable.
2
-
-
... More
3.5 core 95 sq. mm. aluminium cable.
8
-
-
... More
3.5 core 50 sq. mm. aluminium cable.
6
-
-
... More
3.5 core 35 sq. mm. aluminium cable.
6
-
-
... More
3.5 core 25 sq. mm. aluminium cable.
10
-
-
... More
4 core 16 sq. mm. aluminium cable.
4
-
-
... More
4 core 6 sq. mm. Cu cable.
5
-
-
... More
2 core 10 sq. mm. aluminium cable.
28
-
-
... More
GI PIPE PROTECTION
-
-
-
... More
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required-
-
-
-
... More
100 mm
6
-
-
... More
CABLE TRAY
-
-
-
... More
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel ner etc. as required of the following size. Incl. Al painting of MS support.With 25x25x3mm angle iron support.200x50x1.25mm (18SWG)
10
-
-
... More
WIREMESH TYPE CABLE TRAY
-
-
-
... More
Supply and Erection of following "Wire Mesh Cable Tray". The tray shall be fabricated of pre-galvanised electro zinc plated(Indoor Use) shall confirm IEC 61 537 & amended upto date. The rate shall be inclusive of top cover and all necessary accessories as required.
-
-
-
... More
100MM WIDEX50-55MM DEPTH.
350
-
-
... More
150MM WIDEX50-55MM DEPTH.
160
-
-
... More
300MM WIDEX50-55MM DEPTH.
100
-
-
... More
LIGHT FITTINGS & FAN FITTINGS
-
-
-
... More
Supply and delivery of surface and wall mounted 20W LED batten with polycarbonate housing & integrated electronic driver.
12
-
-
... More
Supply and delivery of 10/12W surface mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and ndependent electronic LED driver.
30
-
-
... More
Supply and delivery of 150W Highbay light gittings Next generation, energy saving, environment friendly & robust highbay LED with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W.
26
-
-
... More
Supply and delivery of 200W Highbay light gittings Next generation, energy saving, environment friendly & robust highbay LED with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W.
12
-
-
... More
Supply and delivery of 30W LED Street light of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08.
8
-
-
... More
Supply and delivery of 1400mm Ceilling fan
66
-
-
... More
Supply and delivery of 300mm Heavy duty metalic exhaust fan
4
-
-
... More
Supply of 450mm dia high speed Pedestal fan
5
-
-
... More
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener
20
-
-
... More
Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.
30
-
-
... More
Extra for suspension exceeding 25 cm with S&F additional 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of required Length for fan.
150
-
-
... More
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
66
-
-
... More
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30Cm (12")
4
-
-
... More
Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For 30 cm (12") Exhaust fan
4
-
-
... More
Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.
38
-
-
... More
Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control swtch, incl. making connections and painting.
8
-
-
... More
EARTHING PIT
-
-
-
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. elow the ground level as below:
7
-
-
... More
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including rilling of 46 nos. 12 mm dia holes on the GI pipe
7
-
-
... More
Extra for treatment of soil by using salt & charcoal or coke for plate electrode
7
-
-
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
15
-
-
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages...8 SWG
40
-
-
... More
SAFETY ITEM
-
-
-
... More
Supply & providing of 1.0 Mtr width & 2 mm thickness Rubber insulating mat tested upto 1.1kV of approved make as per IS.
10
-
-
... More
Supply & fixing of wooden bound, glass covered, Shock treatment chart (both in Bengali & English) on wall with necessary screw & other as required
1
-
-
... More
Supply & fixing of First Aid Box complete with all items as required
1
-
-
... More
Supply & fixing of Danger Board for 415V (250X200mm.) as per IS both in English & Bengali
2
-
-
... More
LIGHTNING PROTECTION
-
-
-
... More
S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1).
6
-
-
... More
S & F of 4 SWG GI (Hot Dip) wire on Parapet/Roof/Plinth/ Surface of wall for lightning conductor as required (for Horizontal runs) with 40 mm long GI Staples spaced not exceeding 1300 mm apart incl. mending good all the damages to the building works.
400
-
-
... More
S & F of 4 SWG GI (Hot Dip) wire on wall for the lightning conductor as required (for vertical run) with GI Staples (40 mm long) spaced not exceeding 1 Mtr. apart incl. mending good the damages to building works (excluding hire charges of scaffolding).
200
-
-
... More
Making soldered joints between conductors, conductors and airterminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint
6
-
-
... More
Making soldered joints between conductors and down pipes/ other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint
1
-
-
... More
Supplying and fixing testing joint, made of 20mm x 3mm thick GI Stips, 125 mm long with 4 Nos tinned brass bolts, nuts, check nuts and spring washers etc. complete as required.
6
-
-
... More
Charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements