West Bengal Electronics Industry Development Corporation Limited Tender

63A FP

6-32A FP

63A TP

40A TP

6-32A TP

6-32A DP

6-32A SP

Surge Protective Device

Supplying and fixing Class-2 (T2) 415V, FP Surge Protective Device (SPD) of Imax 40kA/pole mounted on din rail of existing DBs and necessary connection

MV CABLE

Supplying, laying, testing and commissioing of 1.1KV grade, A2XFY XLPE Armoured Aluminium cable of following size with all necessary accessories required for installation on the wall above false ceiling and concealed/surface on wall below the false ceiling, Rate shall include with 2 Nos. 10 SWG GI earth continuity Wire for running earth and all civil work like cutting dressing mending good damages as required.

4 core 4 sqmm

4 core 6 sqmm

Cable End Termination

Supplying and fixing Double Compression type Gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE armoured cable as below:

4 core 4 sqmm

4 core 6 sqmm

Finishing the end of following XLPE armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make),tapes,anticorrosive paste & jointing materials:

4 core 4 sqmm

4 core 6 sqmm

MCB Enclosure Box for AC ODU

Supplying and fixing of 6-32A FP MCB/Isolator with metal enclosure (outdoor type-IP65) near AC ODU (concealed/surface) & mending good the damages to original finish including painting, connection & provision for earthing attachement.

SUB MAINS/CIRCUIT MAINS

Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FR' – in PVC Rigid/Flexible Conduit 'FR' (ISI Marked) on wall/ceiling/Furniture as per site requirement (concealed / surface)

Supplying & drawing of wiring in 11KV single core stranded 'FR' PVC insulated & unsheathed copper wire in 20mm size PVC rigid/flexible conduit (as per direction by EIC) 'FR' including neccessary Fittings and neccessary connections as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Supplying & drawing of wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire in 25mm size PVC rigid/flexible conduit (as per direction by EIC) 'FR' including necessary Fittings and necesaary connections as required

4 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC.

Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FR' – in PVC Casing-Capping on wall/ceiling/Furniture as per site requirement

Supplying & drawing of Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire of following sizes in 25mm PVC casing-capping (as per direction by EIC) including necessary PVC clips, fittings, necessary connections as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Point Wiring

Supplying and carrying wiring for light, fan and dependent socket points by using 16 SWG MS/PVC conduits with threaded joints of required dia as per IS 732, MS/PVC conduit accessories, MS/PVC flexible conduit with couplers for drops with accessories, 2 x 1.5 + 1 x 1.5 sq mm, 1100V grade FRLS PVC insulated copper wires approved 6A modular type switches and sockets with plates and all accessories for fixing in modular furniture, GI/PVC boxes and other point wiring accessories and carrying out surface/concealed conduit system of wiring as per requirement with all wiring materials. Conduits shall run on surface of the ceiling above false ceiling and concealed in wall by cutting chase in wall and mending good of all the damages. All points shall be earthed with 1.5 sq mm FRLS flexible copper wire. Wires shall be terminated at light fixtures with ferrules, 16A, 4 way connector, wire ends shall not be kept loose/bare. The rate shall also include all accessories of MS/PVC conduits, etc, necessary civil works for embedding conduits and boxes below false ceiling, wherever applicable.

1 light point controlled by 1 no. 6A switch

2 light points controlled by 1 no. 6A switch

3 light points controlled by 1 no. 6A switch

Switches & sockets

SIT & C of the following components like approved plate type modular switches, socket etc. duly wired.

1 No. - 6/16A, 6 pin in universal socket controlled by 16A, SP switch, RP in workstations and in cabins, with MS/PVC Box.

Same as above but without MS/PVC Box

SWITCH BOARD

Supplying & Fixing GI Modular Switch Board with top & bottom plate of the following sizes for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

4 Module

Empty Conduits

Supply and fixing of FRLS PVC (ISI marked) conduit (rigid/flexible) of various dia, exposed or concealed with all accessories like tees, bends, glands etc. JBs (PVC) as required and fish wire etc for wiring purpose complete and mending good damages to building works.

20 mm dia (2 mm thick)

25 mm dia (2 mm thick)

Supplying and fixing PVC casing-capping on wall or ceiling, including elobw, necessary PVC fittings etc. amd mending good damages to building works

20x10 mm Size