West Bengal Electronics Industry Development Corporation Limited Tender

Complete both sides existing window grills including window mazda section frames And sliding glasses , top fixed glasses will be removed and replacement with single Single piece toughened glasses with black ceramic borders will be pasted

Removal of both sides luggage hat racks, removal of internal ceiling and roof Hatch exit system, internal ceiling insulated and box framing will be fabricated and Finally ACP( Aluminium composite panel ) finish will be given, external ceiling Hatch placement area will be covered with new sheet welded properly

Complete partition wall will be fabricated with square pipes in between driver cabin And rear display area, and the partition frame will be insulated and covered with ACP( Aluminium composite panels) from both the sides. One Swing /sliding door With see through glass will be fabricated and installed in the partition wall with Proper locking system

Rear show will be removed and custom fabrication of 2nos swing doors with Fixed glasses will be done including folding steps /closing inward steps as per Space availability

Interior wall side existing GI Panels will be removed, and insulated and finally full Length ply 12mm will be fixed on fabricated structural framing and above the ply surface ACP( Aluminium composite Panel ) will be pasted

As shown in the drawing both sides table slab formation will be fabricated and erected, material usage will be ply and structural framing will be done with angle And square pipe, and ply surface and sides will be pasted with laminates erected, material usage will be ply and structural framing will be done with angle And square pipe, and ply surface and sides will be pasted with laminates

10nos to 12nos 10watt led 220v application concealed led lights will be fitted Within cileing panel , 4nos 6” 220v application wall mount fans will be installed 4nos, 24v wall mount fans will be installed, on both the side panel plug points Will be installed for led screens and laptops 5Amp each. All ceiling wiring And side panel wiring will be new 220v and 24dc, all wiring will be concealed And conduit, Circuit breakers and mcb swtiches will be fitted within the board Placement within partition wall facing driver cabin. 30 meter 3core cable will Be installed with the change over switch for supply of electric drawn from External source, line for generator , line for UPS and batteries will be series type, so to enable 3 mode of electrical system support , one with external source electric drawn, second with honda generator- simulteneously charging The UPS & Batteries also, third electric drawn from ups batteries in absence Or faliure of external source and honda generator . and side panel wiring will be new 220v and 24dc, all wiring will be concealed And conduit, Circuit breakers and mcb swtiches will be fitted within the board Placement within partition wall facing driver cabin. 30 meter 3core cable will Be installed with the change over switch for supply of electric drawn from External source, line for generator , line for UPS and batteries will be series type, so to enable 3 mode of electrical system support , one with external source electric drawn, second with honda generator- simulteneously charging The UPS & Batteries also, third electric drawn from ups batteries in absence Or faliure of external source and honda generator .24v dc led strips lights concelaed within aluminium section and covered with Acrylic glass will be fitted to the entire ceiling including driver cabin

One no under flooring LHS slide out compartment will be fabricated with Cover lid system with proper locking arrangement. One no under flooring Compartment with louver system with properlocking system will be fabricated For placement of UPS and batteries

Driver cabin will be ACP finish as of same interior finish of rear display area. 220v and 24v dc application ceiling led lights will be intalled. One 7” tft colour Monitor with day night vision led camera will be installed at rear panle of the Bus for parking assistance

Complete bus exterior painting 2k finish as per your colour scheme, ant dents And un even surface will be rectified

Good quality bar tools/revolving chairs will be provided

Customization support from internal ceiling for holding and rotation of 55” led Screen as per your requirement for rear exit display activity will be fabricated

RHS underfloor compartment for placement of split ac out door unit, With custom lid louver fabricated and proper locking system

Portable Sound Proof Generator 7 KVA

LED TV 55 inch with revolving hanger

LED TV 43 inch with hanger

Split AC 1.5 with outdoor unit

Technician, Electrician, Labour & fitter charges