West Bengal Agro Industries Corporation Limited Tender

Single brick flat soiling of picked jhama bricks in including ramming and dressing bed to proper level and fitting joints with local stand

Cement concrete with graded stone ballast (40 mm size excluding shuttering ) fround floor A pakur variety 1:3:6 proportion

Ordinary cement concrete mix (1:1:5:3) with graded stone chips (20mm nominal size ) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes with local hrad black stone

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of apporved thickness with required bracing for concreteslabs beams and columns ,lintels curved or straight including fitting fixing and striking out after completion of works( upto roof of ground floor) Without Stout Props:

With Stout Props:

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars stirrups,binders etc. intial straightening and removal of loose rust if necessary ,cutting to requisite length ,hooking and bending to correct shape ,placing in proper position and binding with 16 gauge black annealed wire at every intersection ,complete as per drawing and direction. I) tor steel/mild steel JSW/JSPL/SHYAM/SRMB/BMASL/ELECROS/TEEL/SSL

Brick work with 1st classs bricks in cement a) In foundation and plinth

Plaster to wall floor celing etc with sand and cement mortar including off or chamfering corners as directed and raking out joints including throating , nosing and drip course, scaffolding /staging where necessary Ground floor) (Excluding cost of chipping over concreate surface) 15mm th cement morter 1:6 (Outside plaster) ground floor

Protective and decorative acrylic exterior emulsion paint of approved quality,as per manufacterer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material,labour,scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat). Normal Acrylic Emulsion

b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. On Steel Surface

(A) Painting with best quality synthetic enamel paint of approved make and brand includig smoothening surface by sand paperi g etc. Including using of approved putty etc.on the surface,if necessary : With other than hi-glosss of approved quality-(iv) Two coats (with any shade except white) b) On steel or ther metal surface with super gloss (hi-gloss)- (iv) Two coats (with any shade except white)

M.S. Structural works with hollow section (Square or rectangular shape) conforming to IS: 806-1968 & IS: 1161-1998) connected to one another with bracket ,gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete includig cuttig to requisite shgape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS:9595 using electrodes of approved make and brand conforming to IS: 814-2004, haulage, hoisting and rection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as slectrodes, gas and hire charges of all tools and plants and labour required for executin and all incidetal charges (such as electricity, labour insurance)etc. complete. Payment to be made on the basis of calculated weight of structural member of MS Hollow Section as specified in relevent IS code in finished work. Payment for gusset,bracket,cleat may be made by adding the actual weigjt of such items with weight of finished structural members. The rates are consirered for a hwight of erection 8 m./2nd floor level from the ground ,Add 1.5 %extra over the rate for each additional floor or 4m . beyond the initial 8m.or part thereof. i) For roof truss works a) Span up to 12 Mtr.

Supplying, fitting & fixing Zn-AI alloy (55% AI & 45% Zn) coating of 150 grams per sq.meter (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia 3 mm th.washer etc.complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (i) In Roof:- a) With 0.5 mm thick sheet

Supplying , fitting & fixing UPVC pipes A- Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, flor etc.cutting trenches in any soil through massonry concrete strutures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/ Bitumen/M-Seal etc) complete. A) UPVC Pipes: ii) 110 mm Dia.

For Display board or wall writing

Sub Total

GST 18%

CESS 1%