West Bengal Agro Industries Corporation Limited Tender

S/F am bracket of 50 mm bore tubular Pipe (M.S.) of 1.5 m (5') length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work.

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long land 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long Gl bolts, double nuts, double washers inc. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:. By TATA Medium GI pipe for soft soil.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole One coat of red lead/Zinc chromate priming

1st coat of synthetic enamel paint over the primer

2nd coat of synthetic enamel paint over the 1st coat

Supply for fitting of 17 Watt & 3200 Lumens All in One Solar LED Street Light Luminaires having polycrystalline solar cell. Detailed technical specifications given below: a. System Wattage: Should not be more than 17 Watts (+/-5%). b. System Lumen Output: Should not be less than 3200 Lumen. c. System Efficacy: Should not be less than 185 Lumens/Watt. d. Battery Chemistry: Lithium Ferro Phosphate (LiFePo4) battery should be used. e. Battery Capacity: ≥256Wh. f. Charging Electronics: Integrated MPPT charger with driver. g. Charger Efficiency: 90% h. Driver Efficiency: 90% i. LED Burning Hours: Should be 50000 Hrs.@L70/ j. IP Rating: IP65 k. Housing: Aluminum Pressure Die Cast. l. Front Cover: UV stabilized polycarbonate cover should be used for better light distribution. m. CCT (Color Temperature): 5700K (+/- 5%) n. CRI: 70 (+/- 5%) o. Luminaire should have in-built PIR sensor. p. Charging & Discharging LED Indicator: Should be provided in luminaire. q. Input Voltage: 12V DC r. Adjustable Tilt Angle (Deg.): Should be 0 - 15 Deg. adjustable. s. Solar Cell Efficiency: Min. 12%, Polycrystalline. t. Operating Temp Range for Light Engine: 0 to +35 Deg. C. u. Operating Humidity: Up to 95% V. Safety of Solar Panel Module: IEC 61730-1,2 & IEC 61215 x. Manufacturer should provide LM79/ LM80 reports corresponding to the luminaire/ LED chip along with Type Test Certificate. Waranty - 5-years warranty against manufacturing defects from date of supply. Luminaire Make: PHILIPS BRP710 P LED 32 CW MR S1 12V LEP AIO SOLAR EQUIP IN AIO Solar Equip IN or Similar Specification of Havells/Bajaj/C&S make.

Supply & Fixing Information Sign Board 500x300mm fabricated with MS Sheet 16SWG and ISA frame 25x25x4mm including Painting and lettering with approved paint as per instruction of authority.

Sub Total

GST 18%

CESS 1%