West Bengal Agro Industries Corporation Limited Tender

Earthing with 50mm dia Galvanised iron pipe 3.64mm thick x3mts long and 1x4SWG GI wire (1Mts long) 13mmx8Omm dia GI bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection as to GS. By TATA Medium Gl pipe for soft soil.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paintprimer of approved make, and brand incl. preparation of surface by sand paperlemery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole. One coat of red lead/Zinc chromate priming.

1st coat of synthetic enamel paint over the primer

2nd coat of synthetic enamel paint over the 1st coat

Supply and Fixing 25W & 3750 Iumens Stand Along LED Semi Integrated Solar Streetlight with arm suitble for 65-80mm dia pole and perfect solar system solution for remote & off grid locations as well as farmhouses, gardens and parks for roadway marking and community lighting. Housing in Aluminium Alloy body which makes it water & rust proof with IP65. PV module 100 Wp under STC with adjustable freme Battery Minimum 12.8V, 35 AH capacity Lithium Ferro Phosphate battery System wattage should not be less then 11W (+/-5%), system lumen ef Light Source White Light Emitting Diode (W-LED) 20 Watt, W-LED luminaire, dispersed beam, soothing to eyes with the use of proper optics and diffuser. LED Chip should be compliance to IES: LM-80 (Approved Method for Measuring Lumen maintenance of LED Light Sources and LED lumen depreciation time to L70). Test report for same should be submitted. The luminaire must use high efficacy W-LED with minimum 150 lumens per watt (and UV free). [A certificate to be submitted by the System supplier to the Test Lab during certification] Minimum 24 Lux when measured at a point 6 meters below the light. The illumination should be uniform without dark bands or abrupt variations, and soothing to the eye. Higher light output will be preferred. Photometry and Color parameters as per IES LM-79:2008 or IS: 16106:2012 for following performance parameters like: 1) Total luminous flux: ≥ 3750 Im. 2) Luminous efficacy (i.e. system efficacy): ≥ 150 Im/W. 3) Color Temperature: Between 5500 K to 6500 K. 4) CRI ≥ 70 5) Luminous intensity distribution should follow the batwing patterns in polar curves. 6) Require validation report using .ies file, which is generated during luminous intensity distribution test and using maintenance factor 0.9 and pole height of 6m., Road width 5m and Pole span 30m. The average illuminance level and uniformity should comply with requirement as per IS 1944, wherever applicable. 7) The luminaire should be tested for all type tests as per IS 10322 Part 5 Sect 3 or IEC 60598-2-3 standards. Warrenty-The street lighting system (including the battery) will be warranted for a period of five years from the date of supply System Make: Havells/Bajaj/Wipro or Similar Spicification with Govt. approved brand.

Supply & Fixing Information Sign Board 500 x 300mm fabricated with MS Sheet 16SWG and ISA frame 25/25x4rnm including Painting and lettering with approved paint as per instruction of authority.

Sub Total

GST 18%

CESS 1%