Water Resources Development Directorate Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Water Resources Development Directorate - WRDD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date22 Aug 2024
Closing Date9 Sep 2024
Tender Amount₹ 19,42,416
Costs
EMD
₹ 38,848Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Re Drilling Of Defunct Dtw Including Reconnection To The Existing Line Repair And Maintenance Of Pump House And Pipe Line Along With Supply Of Materials At 98t Palla-i Of Bongaon Block Under Barasat Ai Divn Under Core-sector 2024-25.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WRDD_737722_4Bid Award Id
ViewTender No
WRIDD/EEAI/BST/eNIT4/24-25Tender Authority
Water Resources Development Directorate ViewPurchaser Address
-Website
http://http://www.wbwridd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(iv) beyond 90 metres and upto 120 metres
30
35926
1197.55
... More
(v) beyond 120 metres and upto 150 metres
30
36209
1206.98
... More
Labour charges for lowering of ERW pipes, strainers, blank pipe etc. and fitting, fixing and jointing of tubewell assembly at site by welding in a manner as will be specified by the Engineer-in-charge. (i) 200 mm NB Blank pipe, Slotted pipe & Bottom Plug
114
26874
235.74
... More
(ii) 350 mm NB Housing pipe
36
18670
518.62
... More
Supplying, fitting, fixing including fabrication with required materials (IS -2800 Part -I with latest amendments) as directed by the Engineer-in-charge and lowering in position etc. (i) 10 mm. thick (350mm x 200mm) NB M.S. Reducer of approved quality including socket
1
3754
3754.83
... More
(ii) M.S. Centre guide (consisting of 3 nos., 6 mm thick, 50 mm wide, not less than 600 mm long and 125 mm rise of arch) of approved quality.
24
5544
231.02
... More
((iii) M.S.Top cap of suitable size (8 mm thick) and approved quality for covering top of housing pipe of 350 mm NB (Top cap will be tack welded with housing pipe at 4 points 90° apart).
1
1073
1073.08
... More
(iv) 100 mm width × 12 mm thick Sockets / Rings made from MS Flats by rolling process and double butt welding for jointing 350 mm NB Pipe.
6
4328
721.36
... More
(v) 75 mm width × 10 mm thick Sockets / Rings made form MS Flats by rolling process and double butt welding for jointing 200 mm NB Pipe.
20
8580
429.04
... More
Supply of gravel for use as pack in tube well of 2 mm to 4 mm. size (as per IS: 4097) and gravel treatment of tubewell including screening, washing, cleaning etc. of the gravels at the site, all complete as per direction of the Engineer-in- Charge. i) For sites within 4 Km. from all weather metal road
41
110659
2699
... More
Development of tubewell in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand conent beyond permissible limit with required capacity of compressor ( about 200 psi, 375 cfm Aircompressor, actual psi and cfm depend on tube well head conditions), running the compressor for required time till well is fully developed and followed by development of tube well by over puming with 15% to 25% higher discharge than expected discharge of tube well capacity Vertical Trubine pump and carrying out step-drawdown test, yield test, verticality test etc as per prescribed method all complete including hire & labour charges of compressor, tools & accessories etc. all as per requirement and direction of Engineer -In - Charge. (ii) Depth beyond 120 meter upto 200 meter
1
44525
44525
... More
Making slots of 75 mm X 1.60 mm size with a minimum clearance of 4.70 mm in between two adjacent slots over the outer surface of 200 mm NB ERW pipes (to be issued departmentally) in 10 (ten) rows (each row consisting of 96 slots) per metre length of ERW pipe with a clearance of 25 mm in between two rows as per drawing and specification including smoothening the edges after slotting, cost of transportation of ERW pipes from Departmental Store to Workshop and back to drilling site, loading, unloading and carrying by head-load where necessary both ways, all complete.
30
28288
942.95
... More
Mobilisation charges for transporting upto site including loading, unloading of all plants, machinaries & equipments required for drilling, development and testing of Tubewells and also the cost of construction of temporary roads over field and / or culverts, repairing existing roads and / or culverts all complete, carrying materials on head load, carts or boats as the case may be :- (i) For sites within 4 km from all weather metal road.
1
7625
7625.64
... More
Electrologging of bore hole of different dia tubewell for locating water bearing strata and saline aquifer, if any, after conducting relevant geophysical tests. All test reports, compiled data and raw data sheets should be submitted to the Engineer-in- Charge (Cost is inclusive of all charges for equipments, labour, data aquisition & compilation of data sheets as per
direction of the Engineer-in-charge)
1
8015
8015.08
... More
Part-B: Repairing of Pump House : Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.
5.69
2543
447
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. Including stacking of steel bars.
(a) In ground floor including roof
2.94
5750
1956
... More
Brick work with 1st class bricks in cement
mortar (1:6). Superstructure, Ground floor
8.89
50104
5636
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
1.82
1340
736
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
31.42
10525
335
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes (A) [Pakur Variety]
3.49
21470
6160.8
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4m. For Tor steel / Mild steel. Other than SAIL/TATA/RINL
0.27
16073
58662
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (i) with (1:6) cement mortar. b) 20 mm. thick plaster.
38.22
6688
175
... More
(c) 15 mm. thick plaster.
75.97
11471
151
... More
(ii) with (1:4) cement mortar. (c)10 mm. thick plaster.
24.98
3322
133
... More
Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE: Cement 0.152 cu.m. per 100 sq.m.
16.05
545
34
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.
3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. (a) 25 mm. thick
1.13
308
273
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete. Iron Butt Hinges and M.S clamps. {The quantum should be correted upto three decimals). (e) Sal: Local
0.08
5980
77671
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (a) 40mm X 6mm, 125mm Length
12
240
20
... More
Z-batten shutters of door and window as per design havings tongued and groove-half lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. (A) Shutter with 25mm thick planks, 19mm thick battens.
battens (Shutter Size 0.76 m x 2.03 m) (iii) Sishu, Gamar, Champ, Badam, Bhola,Morga, Hallak
4.34
11924
2750
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (i) 100mm. X 50mm. X 1.25mm
6
258
43
... More
(vi) 50mm. X 37mm. X 1.50mm
8
136
17
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 250 mm long.
2
318
159
... More
Renewing 125mm long wooden buffer block iii) WithMalayasian Sal.
6
330
55
... More
Renewing hinged cleat with old hinge and new screws. iii) Local Sal. (a) with 5 cm. iron butt hinge.
10
400
40
... More
Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt.
1
63
63
... More
(b) 100mm long x 10mm dia bolt.
4
160
40
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S W.I. Flats and bars of windows, railing etc fitted and fixed with necessary screws and lugs in ground floor.
0.34
3361
9888
... More
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)-1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816-1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/m (a)Mild Steel Joist (125 mm X 75 mm. size) with R.C.C. pillars at the roof of pump house for fitting device of pump unit including hoisting and lifting.
0.03
2468
72603
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (i) 75 mm. Dia.
3.3
620
188
... More
B) UPVC Fittings: a) Plain Tee (i) 75 mm. Dia.
1
102
102
... More
White washing including cleaning and smoothening surface thoroughly. All floors: (b) Three coats (on new works only).
49.44
989
2001
... More
Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly : ii) External surface (ground floor) (b) Two coats (on new works only). (i) Other than yellow, pink.
78.17
1668
2135
... More
Priming one coat on timber of plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
9.3
353
38
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
1.65
47
29
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. pn the surface, if necessary : (a) On timber or plastered surface.
With Super gloss ( hi-gloss) iv) Two coats (with any shade except white).
9.3
753
81
... More
(b) On steel or other metal surface:
With Super gloss ( hi-gloss) iv) Two coats (with any shade except white).
1.65
130
79
... More
Part- C : Repaing of Pipe Line : Earth work in excavation of field trenches as per design section and alignment for laying of pipe lines (PVC, RCC, ACP etc.) upto a depth of 1500 mm all sorts of soils including removing, spreading or stacking extra earth as directed. The item includes necessary trimming of sides trenches, levelling, dressing and ramming the bottom as required complete
1.99
197
99.01
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water ramming complete including the cost of supply of sand, (payment to be made on measurement of finished quantity)
0.25
234
93621
... More
Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.
8.36
3017
361
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,rf any, in gound floor as per relevant IS codes. a) Pakur Variety
0.63
3537
5614.56
... More
Brick work in cement mortar (1 : 6) with first class bricks including racking out joints, scaffolding and other incidental works etc. complete. (a) In foundation and plinth.
2.04
11042
5413
... More
12.5 cm. thick 1st class brick work in cement mortar (1 : 4) in ground floor including, scaffolding, racking out joints etc. complete.
1.8
1324
736
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course as necessary at ground floor. (a) with (1:6) cement mortar. (i) 20 mm th Plaster.
18.18
3181
175
... More
Neat cement punning about 1.5 mm. thick in wall dado, floor, drain, door and window sill etc. complete.
18.18
618
34
... More
Earth work in filling in trenches after laying pipe lines (PVC, RCC, ACP etc.) with good earth obtained from excavation of field trenches in layers not exceeding 225 mm, including watering and ramming etc. layer by layer complete. (Payment will be made on the basis of measurement of finished quantity of work.)
1.72
113
66.01
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m
1.04
976
939
... More
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
18.18
345
19
... More
Repairing of leakages in collar joints of R.C.C. Pipe line by opening the joints fully by chipping out the old morter, cleaning the pipe recesses and collar properly, and thereafter positioning and levelling the pipes and collar, filling the annual spaces of joints with jute braiding dipped in cement slurry and grouting with (1:2) cement morter mixed with approved quality water proofing compound (5% by wt. of cement) and curing all complete as per direction of Engineer-in-Charge. (i) 225 mm dia. R.C.C. Pipe.
2
135
67.89
... More
Taking out the damaged R.C.C. Tee and 3 nos. collars by dismantling three joints carefully, carrying and stacking the same near the pump house, carrying new R.C.C. Tee and collars from the field stack, lowering the same within the trench, properly levelling and positioning on bricks laid flat, filling the annual space betwen pipe fitting and collars with jute braiding dipped in cement slurry, grouting with cement and sand mortar (1:2) mixed with approved water proofing compound (5% by weight of cement) and curing etc. complete as per direction of Engineer-in-Charge. (i) 225 mm × 225mm × 150 mm R.C.C. Tee.
2
297
148.99
... More
Jointing the end of 150 mm. dia. M.S. extension pipe for spout chamber with 150mm. end of R.C.C. Tee including carrying the M.S. extension pipe from store to site, levelling and positioning the end of extension pipe concentrically with 150mm. end of R.C.C. Tee on bricks laid flat within the field trench and jamming the joints with cement concrete (1:2:4) with stone chips 10 mm. down mixed with approved water proofing compound 5% by weight if cement) of adequate thickness to provide a leak proof joint as per direction of Enginer-in-Charge (Cost of bricks for levelling is included).
2
162
81.09
... More
b) Removing of Chokage due to sludge, mud, sand or any other forign materials deposition from the underground 450 / 300 / 225/ 150 mm dia. R.C.C. Pipe Line with split bamboo, wire brush, coir rope etc. along with suitable cleaning agent as necessary as per direction of E.I.C. (This item includes cost of earth cutting & back filling of trenches and required materials for cleaning but excluding the cost for taking out 1 full length of RCC Pipe by dismantling of 2 nos. of Collars & re-fitting the RCC pipe with new two nos. collar).
6
231
38.66
... More
b) Laying and joining of RC.C. spun pipes with matching collars of different sizes mentioned below in field trenches including handling and carrying the pipes and matching R.C.C. collars from field stack, lowering the same within the trench, property positioning and levelling on bricks laid flat, filling the annular space between collar and the pipe joint with Jute braiding dipped in cement slurry, grouting with cement and sand mortar (1:2) mixed with approved quality water proofing compound (5% by weight of cement) including cost of cements, bricks for levelling, jute braiding etc.) and curing all complete as per direction of Engineer-in-Charge.
1830mm. long 225mm. dia.
2
64
32.3
... More
Part-D: Internal wiring of Pump House, Reconnection of delivery line and Installation of Pump Motor set : Meter loop connection with 1.1 K.V. Gr. 3½ core / 4 core 10 Sqmm to 50 Sq mm. P.V.C./ XLPE insulated & sheathed and armoured Aluminium/Copper Cable from Meter to incomming TPN Main Switch / Terminal.
(Brand: Gloster/Havells/Finolex)
ii) 25 Sqmm 3½ Core Copper Cable
3
4678
1559.64
... More
Supplying & Fitting E.I. danger board on wall.
a) 20 cm × 30 cm (8" x 12")
2
173
86.7
... More
Earthing with 50 mm. dia GI pipe 3.64 mm thick × 3.04 Mts. long and 1 × 4 SWG GI (Hot Dip) wire (4 Mts. Long), 13 mm dia.× 80 mm. long GI bolts,double nuts, double washers incl. S&F 15 mm. dia GI Pipe protection (1 Mt. long) to be filled with bitumen, partly under the ground level and partly above the ground level, driven to an average depth of 3.65 metre below the ground level as below: (a) By ISI-Medium GI Pipe
2
2792
1396.38
... More
Supplying and fixing earth busbar of galvanized (Hot Dip) M.S. Flat 25 mm × 6 mm on wall having clearance of 6 mm. from wall including providing drilled holes on the busbar complete with G.I. bolts, nuts, washers, spacing insulators etc. as required.
0.5
79
159.12
... More
Connecting the equipments to earth busbar including supplying and fixing G.I. (Hot Dip) Wire of size as below on wall/floor with staples buried inside wall/ floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good all the damages.
iii) No. 8 SWG
15
137
9.18
... More
Supplying and fixing Sheet steel Main Switches 240 Volt, DP with fuse on L&N, 15/16 Amps on flat iron frame on wall. (Make-Havells)
1
587
587.52
... More
Supplying and Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8 watt/100 Watt Gls. lamp complete set.
2
1181
590.58
... More
Fixing only lamps
3
15
5.1
... More
Supply & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required.
B) 32 mm
3
667
222.36
... More
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (precision Make) incl. necy. fittings as required. ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ( Domestic Main Switch Loop connection from TPN Main Switch to domestic Main Switch.)
7
849
121.38
... More
Distribution wiring in 2x 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated and unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (Precision make) with 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed Copper Wire for ECC to light/fan/call bell points with Piano Key type switch fixed on M.S. C.R.C.sheet metal (16 SWG) switch board cum JB on wall complete with 2 Nos. suitable size 'Ph & N' copper bar including bakelite/ prespex (wall matching colour) top cover 3 mm thick and incl. 175mm x 100mm x 62.5mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.
A) average run 5 mts
5
3121
624.24
... More
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated and sheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (Precision make) with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on M.S. C.R.C.sheet metal (16 SWG) switch board cum J.B on wall including bakelite/perspex (wall matching colour) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish.
A) On Board
1
68
68.34
... More
Fixing only Sheet Steel Metal Main Switch (Rewireable type) / Change over on Flat Iron Frame/Angle iron frame on wall. a) 100Amps/63 Amps, 415 Volts TP/TPN Main Switch (Material Deptt. Supply)
1
219
219.3
... More
Fitting & fixing of Starter (Direct on Line or Star-Delta/Auto-Transformer) with Nuts & Bolts fixed on Angle iron frame on wall and making necessary connection with the electrical cables.
Star-Delta / Auto-Transformer Starter (Above 15 HP upto 25 HP)
1
240
240.45
... More
Fixing Voltmeter/Ammeter/Energy meter with screws & other fixing materials & making holes where necessary including making connections. a) 0-50 Amp Ammeter (Material Deptt. Supply)
1
58
58.14
... More
b) 0-500 Voltmeter (Material Deptt. Supply)
1
58
58.14
... More
Supplying and fixing batten holder (Anchor) on 75 mm dia. PVC round block/ round bakelite on wall/ ceiling
3
116
38.76
... More
Supply and fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall including making earthing attachment, painting and mending good damages to building works.
g) 300 mm x 200 mm x 65 mm
2
579
289.68
... More
Supply and fixing bakelite/Perspex top cover on existing switch inspection board by brass screws.
G) 300 mm x 200 mm x 65 mm
2
185
92.82
... More
Supplying, fitting & fixing 350 mm x 250 mm x 25 mm size Wooden Plank on wall (for fitting & fixing of electrial equipments as necessary on the plank).
1
413
413.01
... More
Insulation testing of internal wiring of Pump House/Kiosk Box including wiring of electric Motor & other ancilary equipments by means of Megger
1
165
165.02
... More
Supplying, fitting & fixing of 32 Amps / 63 Amps / 100 Amps, 415V rewireable type porcelain body Fuse top & base complete set conforming to IS: 13947/Part-4/Sec-I/1993 over wooden plank/ board on wall and making necessary connection with the electrical cable as per direction of the E.I.C. 100 Amps
4
2949
737.39
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(a) For Exposed Work
PVC Pipes (Dia) 32 mm
30
7080
236
... More
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/ open masonry trench for single 2,3,3.5 & 4 core
30
1315
43.86
... More
Carriage of Departmental materials from the Deparmental tore to the work site and return back the damaged/replaced and unused materials to store including loading & unloading complete at both sides by Tempo/Van Rikshaw/Mini Truck etc. upto 25 Km distance in one way. i) For Delivery pipe, Surge Tank, Bend, Valve etc.
1
905
905.23
... More
Installation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.) (a)100/150/200 cubic metre per hour capacity electro motor pumping set. (ii)Length of pump assembly of any length exceeding 18 metre length.
1
1510
1510.61
... More
(A)Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends.
(A). Carriage by road (a) Distance upto 50 km.
(i) 100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set)
1
2945
2945.78
... More
Charges for jointing water proof cable with required water proof insullation and proper jointing compound including supplying supplying the same and motor related materials complete.
6
594
99.01
... More
Dismantling the existing G.I./M.S. Delivery Pipe line connection between the existing D.C./Surge Tank/Tripod Set & Tube Well assembly viz Sluice valve, Bend, Surge Tank/Distribution Chamber/Tripod Set Connection pipe etc. and disconnection of delivery side viz. Special bend etc. all complete as per direction of the E.I.C. and stacking all. (Labour required 1 No. Plumbing Mistiry & 1 No. Mazdoor = Rs.326.00 + Rs.245.00 = Rs.571.00 + 11% Cont. Per & LWCess = Rs.633.81) As per PWD, S&P Sch. 2014
1
752
752.47
... More
Labour Charges for fitting, fixing and laying, where necessary of following M.S / G.I. / E.R.W. pipes and accessories (to be supplied departmentally) including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge. (i) 150 mm. dia. ERW/G.I. pipe (Material Deptt. Supply)
18
2427
134.84
... More
(iii) 150 mm. dia. M.S. screwed boss flange (Material Deptt. Supply)
2
54
27.35
... More
(xii) 150 mm. dia. special bend, both ends flanged.(Material Deptt. Supply)
1
81
81.09
... More
Fitting and fixing of M.S. / G.I. / C.I.accessories and special in pipe line (accessories & special to be supplied departmentally) including supply of jointing materials viz.rubber insertion, nuts & bolts, havoc Zink (Zink Oxide) complete as per direction of Engineer-in-Charge. (iv) 150mm. dia. C.I. sluice valve
3
164
54.69
... More
(vii) 150mm. dia.90° M.S. bend with flanged ends
1
49
49.03
... More
(ix) 80mm. dia 3 metres long G.I. pipe with one end flanged
1
54
54.69
... More
Patch/Doubling works complete with M.S. plate including welding, gas cutting, fitting, fixing complete. (a) Cost of 5 mm M.S. plate including wastage due to cutting, including labour charges for straightening fitting, fixing in position.
0.3
1050
3503
... More
(b) Gas cutting to required size upto 8 mm thick M.S. plate, M.S. channel, angle etc. including labour charges, hire charges for all tools and plants.
2.1
491
234
... More
Welding in M.S. structural work with gas or electric: b) Continuous weld.
620
5580
9
... More
Jointing plain end of 300 mm / 200 mm / 150 mm. Dia. M.S. special bend from surge tanks / shore manifold with underground R.C.C. pipe lines of 450mm. / 300mm. / 225 mm. dia. by jamming with cement concrete (1:2:4) with 10 mm. down stone chips mixed with approved water proofing compound (5% by weight of cement) of adequate thickness to provide a leak proof joint including carrying the special bend from departmental store to site, curing etc. as per direction of Engineer-in-Charge.
2
167
83.92
... More
Supplying, fitting & fixing of M.S. plate of size 40 cm x 40 cm, thickness 6 mm, consisting of two equal halves (40cm x 20 cm), placed over Housing Pipe of HDTW/ MDTW to rest the supporting clamps, with semi circular hole of 170 mm dia. at centre including locking arrangement between the two halves on both sides, including fitting, fixing of 40 mm dia. G.I. bend by making a hole on plate for passing submersible cable smoothly and complete in all respect.
1
897
897.69
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and reremoving rubbish as directed within a lead of 75 m (a) Above 150 mm. thick
1
1417
1417
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1.500 mm.
1.5
178
11927
... More
Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.
5.3
1913
361
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in gound floor as per relevant IS codes. a) Pakur Variety
1.23
6894
5614.56
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) a) With earth obtained from excavation of foundation.
1.3
100
7754
... More
Brick work with 1st class bricksin cement mortar (1 : 6). (a) In foundation and plinth
1.75
9472
5413
... More
(b) In superstructure
0.9
5072
5636
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (a) with (1:6) cement mortar. (i) 20 mm. thick plaster.
16
2800
175
... More
(ii) 15 mm. thick plaster.
15
2265
151
... More
Neat cement punning about 1.5 mm. thick in wall, dado, window sill, floor etc.
31
1054
34
... More
Painting with ready mixed Black Japan of approved make and brand including smoothening surface. (ii) Two coats.
18
1008
56
... More
Taking out the damaged R.C.C. Pipe and two collars by dismantling two joints carefully, carrying and stacking the same near the pump house, carrying new pipe and collars from the field stack, lowering the same within the trench, properly positioning and levelling on bricks laid flat, between collar and the pipe joints with jute braiding dipped in cement slurry, grouting with cement and sand mortar (1:2) mixed with approved quality water proofing compound (5% by weight of cement) and curing all complete as per direction of Engineer-in-Charge. (c) 225 mm dia. R.C.C. Pipe.
18
2087
115.98
... More
Laying and joining of R.C.C. spun pipes with matching collars of different sizes mentioned below in field trenches including handling and carrying the pipes and matching R.C.C. collars from field stack, lowering the same within the trench, property positioning and levelling on bricks laid flat, filling the annular space between collar and the pipe joint with Jute braiding dipped in cement slurry, grouting with cement and sand mortar (1:2) mixed with approved quality water proofing compound (5% by weight of cement) including cost of cements, bricks for levelling, jute braiding etc.) and curing all complete as per direction of Engineer-in-Charge. (iii) 1830mm. long 225mm. dia.
33
1065
32.3
... More
Part-E: Procurement of materials : M.S ERW Pipe duly ISI certification Marked Both end plain length of pipe should be 6 meter with a tolerance of A 25 mm as per IS 4270/2001 with latest amendment thereof. a) 350 mm (NB) & 8 mm ( nominal wall thickness)
36
252252
7007
... More
b) 200 mm (NB) & 6.4 mm ( nominal wall thickness)
114
366396
3214
... More
Galvanished M.S Both end Flange as per IS. 1239 length of pipe should be 6 meter with a tolerance of A 25 mm as per IS 1239 (Part-1)/2004 with latest amendment thereof. (For reconnection of delivery line) b) 150 mm (NB) & 4.8 mm ( nominal wall thickness)
18
68400
3800
... More
Supply of 150 mm (N.B) Galvanised M.S. G.I Column Pipe one end screwed & other end welded with non-standard flange (3 mtr long). Thickness of M.S. Pipe 4.8 mm. Pipe should be as per IS: 1239 (Part-I) /2004 with latest amendments. Flange Should be 150 mm (N.B.) Non-standard M.S.Plate flange made from 12 mm thick M S. plate. BOTTOM
1
12218
12218
... More
Supply of 150 mm dia Galvanised M.S. G.I column pipe both end welded with non-standard flange. (3 mtr long). Thickness of M.S. Pipe 4.8 mm. Pipe should be as per IS: 1239 (Part-I) /2004 with latest amendments. Flange Should be 150 mm (N.B.) Non-standard M.S.Plate flange made from 12 mm thick M S. plate. Both M.S. ERW Pipes & Flanges should should be duly ISI certification marked. MIDDLE
6
78348
13058
... More
Supply of 150 mm dia Galvanised M.S. G.I column pipe one end welded with non-standard flange & other end welded with standard flange. (3 mtr long). Thickness of M.S. Pipe 4.8 mm. Pipe should be as per IS: 1239 (Part-I) /2004 with latest amendments. Flange Should be 150 mm (N.B.) Non-standard M.S.Plate flange made from 12 mm thick M S. plate. Standard Flange should be 150 mm (NB) MS Plate Flange duly ISI marked as per IS-6392/1971. Both M.S. ERW Pipes & Flanges should should be duly ISI certification marked. TOP
1
13461
13461
... More
Supply of 150 mm (N.B.) M.S.Plate flange ( asper I.S 6392/1971) (Table-6) with C B 250 mm made from 12 mm thick M S. plate providing 8 nos drill holes of 22 mm dia and also cable holes including necessary painting.
12
13824
1152
... More
Supply of 150 mm dia G,I. 90° Bend as per I.S. 1239 (part-II)/1992 with latest amendments both end welded with flange flange as per IS 6392/1971, table-17 with latest amendments. Both Bend and flange are duly ISI certification marked
2
16350
8175
... More
Supply of 150 mm ( NB ) MS Special Bend both end flanged welded 150 ( NB ) ERW pipe should be conforming to I.S. 1239/ ( part-I) /2004 , midium & 12 mm Nominal thick ness M.S.flange conforming to I.S. 6392/1971, table-17
2
14504
7252
... More
Supply of MS Hexagonal Head Bolts & Nuts bearing IS-1363 (Part-I)/ 1992 of product Grade-C with latest amendments for bolts & IS- 1363 (Part-3) / 1992 of Product Grade-C with latest amendments for Nuts properties / Class for Bolt-4.6 & Nuts-4.5. (Inspection at departmental store only). (size 5/8" x 2" x 21/2" or as reqd. in site)
20
3900
195
... More
Supply of Rubber Insertion of 150 mm ID, 5 mm thick with proper reinforcement 2 ply conforming to I.S. -638/79 with I.S.I. Mark with latest ammendments suitable for raised surface of M.S. flange as per IS.6392/71
16
3120
195
... More
Supply of 150 mm Heavy Duty clamp in two halves made of M.S. flat for holding 150 mm N.B. Column pipe, thickness of the clamp 12 mm, width of the clamp 150 mm, extended length of the arm 200 mm, space between rows 100 mm, space between bolts in a row 75 mm, equally spaced from the centre line of the arm, dia of bolt 16 mm. The gap between arms of clamp and pipe assembly before tightening should be between 6 mm to 10 mm. Two rows of bolts of two nos in each rows of 16 mm size shall be provided on either side of the clamp, in other words there will be all together 4 rows of bolts with the provisions of 8 nos of bolts with nuts and with spring and flat washer.
1
3253
3253
... More
Supply of 150 mm Nominal size (PD) ISI marked Sluice Valves Pressure designation P.N. 1.6 with Hand wheel for water works pupose , C.I. flanged type conforming to IS: 14846/2000 with Amdlt. No 1 & 2. Components /Parts of Sluice Valves shall be manufactured from basic materials given in Table 1 of IS: 14846 / 2000 with Amdt. 1 & 2. The Valves shall be tested for (Closed end test) against Hydrostatic test requirement.
2
19900
9950
... More
Supply of 150mm nominal C.I.T.P./NTP Valve as per drawing (Annexure-E) with MS Spindle and weight of the bottom disk to be fitted with rubber vwasher which will be fitted tightly at the closing of NTP Valve. Their should be arrangement of square type key holder made of MS complete including two coats of painting over a coat of priming. Approximate wt. 20 kgs including keys.
10
47820
4782
... More
Submersible Motor Pump Set having capacity of 115 to 150m³/hr. discharge at 28 to 17 meter total head, Along with flat submersible electric cable 2 x 3 x 6 sq mm of 3 meter. Bowl with strainer and non-return valve. Motor should be designed for operating at 415 volt +6% & -15%, 3 phase, 50HZ,±3% A.C. supply, wet type, water filled, totally enclosed squirrel cage Induction Motor , 20 HP water cooled, water lubricated. Motor as per IS : 9283/1995 with latest amendments there of and Pump as per IS :8034/2002, with latest amendments there of NRV - 6".
1
111292
111292
... More
3 Core Copper PVC insulated (heavy duty) flat weather proof Electric cable duly ISI certification mark. 6.0Sq mm
100
35200
352
... More
Heavy Duty Star/Delta Oil Immerged Starters with 12 nos. Fixed & 6 nos. Moving Contacts with 3 Magnetic Overload Relay with adjustable Oil Dashpot Time lags and under Voltage release suitable for use with 380/415 Volt, 3 phase, 5 Hz, AC supply & generally conforming for 20 HP Pump sets. 3φ electromagnetic Star-Delta Strarters for 20 HP motor
1
24700
24700
... More
SUB TOTAL WITH OUT TAX FOR PART A+B+C+D+E
1
1796968
1796968.04
... More
Add: Carriage @3% on item no. 18 to 49
1
4813
4813.5
... More
Add: Carriage @4% on item no. 50 TO 65 and 98 to 118 except item no. 50, 58, 59, 60, 106, 107, 110
1
2637
2637.52
... More
Add GST@18%. On [Item No. 1 to 118+ carriage]
1
129506
129506.59
... More
Labour welfare cess @1% on [Item No. 1 to 118 + carriage + GST]
1
8489
8489.88
... More
GROSS AMOUNT INLCUDING GST+ CESS
1
1942415
1942415.53
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements