Water Resources Development Directorate Tender

Installation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.) 100/150/200 cubic metre per hour capacity electro motor pumping set. Length of pump assembly of any length exceeding 18 metre length.

30 cubic metre per hour capacity electro motor pumping set. Length of pump assembly of any length exceeding 18 metre length.

(i) Jointing water proof cable with the leads of the motor including soldering with requisite water proof insulation and proper jointing compound/Vulcanized rubber tape so that proper water proof insulation is assured. [ 45 nos. x 2 sets = 90 sets]

(ii) Charge for jointing water proof cable with soldering water proof insulation and proper jointing compound including supplying the same and motor related materials complete (only cable will be supplied departmentally) [ 5 nos. x 2 sets = 10 sets]

(A)Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends. (A). Carriage by road (a) Distance upto 50 km. (i) 100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set)

(ii) 30 cubic meter per hour (m3/hr) capacity Electro motor pumping set.

Carriage of Departmental materials from the Deparmental Store to the work site and return back the damaged/replaced and unused materials to store including loading & unloading complete at both sides by Tempo/Van Rikshaw/Mini Truck etc. upto 25 Km distance in one way. (i) Pump-Motor Set (this item is applicable only for burnt/damaged Pump-Motor Set)

Supplying, fitting & fixing of M.S. plate of size 40 cm x 40 cm, thickness 6 mm, consisting of two equal halves (40cm x 20cm), placed over Housing Pipe of HDTW/ MDTW to rest the supporting clamps, with semi circular hole of 170 mm dia. at centre including locking arrangement between the two halves on both sides, including fitting, fixing of 40 mm dia. G.!. bend by making a hole on plate for passing submersible cable smoothly and complete in all respect.

Supplying, fitting & fixing of M.S. plate of size 20 cm x 20 cm, thickness 6 mm, make of two halves (20cm x 10 ern), placed over Housing Pipe of LDTW to rest the supporting clamps,with semi circular hole of 90 mm dia. at centre including locking arrangement between the two halves on both sides,including fitting, fixing of 25 mm dia. G.!. bend by making a hole on plate for passing submersible cable smoothly and complete in all respect.

Supply & tranport of Rubber Insertion of 150 mm ID, 5 mm thick with proper reinforcement 2 ply conforming to I.S. -638 /79 with I.S.I. Mark with latest ammendments suitable for raised surface of M.S. flange as per IS.6392/71 (Table: 5) [ 45 nos. x 7 nos = 315 Nos.]

MS HexagonalHead Bolts & Nuts bearing IS-1363 (Part-I)/ 1992 of product Grade-C with latest amendments for bolts & IS- 1363 (Part-3) / 1992 of Product Grade-C with latest amendments for Nuts properties / Class for Bolt-4.6 & Nuts-4.5. (Inspection at departmental store only). [ 45 nos. x 4 kg = 180.00 kg]

Welding in M.S. structural work with gas or electric: b) Continuous weld. 40 x 2 x 22.5cm. = 1800.00 cm.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. For making cage to protect the Submersible Motor Pump set from tearing out of the Column pipe joint.(@6kg for each set) For 40 nos. set = 40 x 6Kg = 240 Kg

SUB TOTAL WITHOUT TAX For 45 nos. HDTW/DTW and 5 nos. LDTW

GST@18%.

Labour welfare cess @1%