Water Resources Development Directorate Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Water Resources Development Directorate - WRDD Tender
Civil And Construction
Road Construction
Eprocure
Opening Date10 Sep 2024
Closing Date23 Sep 2024
Tender Amount₹ 29,09,839
Costs
EMD
₹ 58,197Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Renovation Of Narasundarpara Hdtw Under Gangarampur Block Through Re Drilling Installation Renovation Of Wta Pump House And Replacement Of Submersible Pump Motor Set And Electrical Accessories And Supply Of Material Under Gangarampur Ai Sub Di
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WRDD_746625_4Bid Award Id
ViewTender No
WRIDD/EE/BLGAI/CORE SECTOR/5/24-25Tender Authority
Water Resources Development Directorate ViewPurchaser Address
-Website
http://http://wbwridd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
SUPPLY OF M.S ACCESSORIES
-
-
-
ISI marked Sluice Valve pressure designstion P.N 1.6 with Hand Wheel for Water works purpose, C.I Flange type confirming to IS-14846/2000 with Amdl no.1& 2 component/parts of the Sluice Valve shall be manufactured from basic materials given in Table-1 of IS-14846/2000 with Amdt no 1& 2. The Vave shall be tested for (close & test) against Hydrostatic test requirement.
1
9950
9950
150 mm (NB) MS Special Bend both end flange welded (asper Annexure F) 150 mm (NB) ERW Pipe should be confirming to IS-1239(Part-1)/2004 medium and 12 mm nominal thicness MS Flange confirming to IS-6392/1971 ,Table-17.
3
24000
8000
150 mm (NB) dia GI M.S Flange Pipes (4.8 mm wall thickness) as per IS 1239 (Part-I)/2004 with latest amendments thereof duly welded on both sides of pipe and on inside & outside with corresponding diameter of MS flanges as per IS-6392/1971. Table 17 with latest amendments thereof. Both M.S. E.R.W. Pipes & flanges should be duly ISI certification marked. Length of the flanged M.S. E.R.W. pipe should be 6 metre ± 10 mm/ As per requirement of Ordering authority.
12
45600
3800
150 mm (NB) MS plate Flange duly ISI marked as per IS-6392/1971
10
9730
973
150 mm Dia (NB) GI MS flanged Column Pipe one end welded with non-standered flange and other end welded with standard flange . [3 mtr long Top Pipe] . (As per Annexure F & TSP-3.)
1
13461
13461
150 mm Dia (NB) GI MS flanged Column Pipe both end welded with non-standered flange. [3 mtr long Middle Pipe] . (As per Annexure F & TSP-3.)
9
117522
13058
150 mm Dia (NB) GI MS flanged Column Pipe one end screwed & other end welded with non- standard flange. [3 mtr long Bottom Pipe] . (As per Annexure F & TSP-3.)
1
12218
12218
150 mm Dia (NB) GI 90 degree bend as per IS-1239(Part-II)/1992 with latest amendments, both end welded with flange as per IS 6392/1971, table-17 with latest amendments, 50 mm Dia (NB) socket to be used as per IS-1239(Part-II)/1992 with latest amendments for priming, 50 mm Dia (NB) plug to be used in socket is as per IS-1239(Part-II)/1992 with latest amendments. Both bend and flange are duly ISI certification marked . (As per Annexure H )
3
24525
8175
150 mm dia.Alfa-Alfa valve C type.
12
53220
4435
150 mm NB GI Heavy Duty Supporting clamps in two halves for holding column Pipes.
1
3253
3253
M.S Hexagonal head bolts & nuts confirming to IS-1363 (Part-I) / 1992 of product grade C with latest amendments for bolts & nuts are duly ISI certified mark. (Full threaded)
-
-
-
M16 X 50
25
4250
170
M16 X 65
25
4250
170
M 16 X 80
45
7650
170
Sypply and transport of Rubber Insertion 150 mm dia (NB) X 5mm thick with proper reinforcement reinforced with 2 ply confirming to IS-638 / 1979 with latest amendment duly ISI mark suitable for MS flange as per IS 6392/71 with standard drilled holes 150 mm dia.
65
7085
109
SUPPLY OF ELECTRICAL ACCESSORIES
-
-
-
ISI marked Submeersible Motor pump Set having capacity of 125 to 180 m3/hr.discharge at 35 to 20 mtr.total head, along with flat submersible electric cable 2 x3x 6.0 sq.mm of 3 mtr. For motor pump set consisting of Bowl with strainer and non -return valve.Motor Should be designed for operating at 415 volt +6% & -15% , 3 phase 50 HZ, ± 3% A.C supply ,wet type, water filled, totally enclosed squirrel cage Induction Motor, water cooled, water lubricanted. Motor as per IS: 9283/1995 with latest ammendments there of and pump as per IS: 8034/2002, with latest amendments there of. (25 HP, 6 inch NRV ).
1
120578
120578
Manually Operated Heavy Duty Star/Delta Oil immersed starter with 12 nos fixed and six nos moving contacts with three magnetic overload release with adjustable oil daspot time lags and under voltage release suitable for use with 380/415 Volts , 3 phase 50Hz AC supply and generally conforming to IS 13947 (Part 4/Sec 1) /1993
Suitable for 25.0 pump sets
1
27820
27820
Sheet Metal enclosed re-wireable type Fuse, Main switch, 415 VLTS, 3 Phase, 50 Cycle AC Supply confirming to IS: 13947(Part-3)/1993. For 100 Amps AC, TPN
1
15267
15267
10 Sq.mm copper PVC insulated (Heavy Duty) Flat Weather proof Electric cable duly ISI certification mark as per IS 694/1990. 3C X 6.0 Sq. mm
102.86
36206
352
SUPPLY OF PVC PIPE & ACCESSORIES
-
-
-
UPVC Pipe Class-I (2.5 Kg/cm2) IS-4985/2000 certification marked with latest ammendments , Ivory Grey colour both end plain along with one matching coupler /socket (Class-II) duly IS-10124/1988 marked & reqiured solvent cement duly IS-14182/1994 marked for each pipe. Length of Each Pipe 6.0m with tolerance +10 mm .
-
-
-
140 mm dia. Class II
72
35280
490
200mm dia class-I
36
21780
605
PVC Tail Piece (Class-II) with Metalic Flange confirming to IS-10124(Part-6)/1988 with latest ammendments. 160 mm dia.
12
8040
670
UPVC Fittings (Class-II) confirming IS-10124 /1988 with latest ammendments.
-
-
-
140 mm dia. 90 degree Bend
4
2588
647
PVC Reducer 160mm x140 mm (Class-II)
8
2624
328
140 mm dia. PVC Equal Tee
4
2848
712
160 mm dia.PVC Coupler (Class-II)
8
1744
218
140 mm dia.PVC Coupler (Class-II)
50
6500
130
Solvent Cement (Heavily Bodied)
5
2125
425
ESTIMATE FOR REDRILLING
-
-
-
Drilling of bore hole 55.88 cm dia through any kind of soil by adopting any method of drilling (by Direct or Reverse Circulation Rotary Rig) upto required depth including digging trenches and pits etc. all complete.
-
-
-
(i) Upto 30 metres below G.L.
30
35077
1169.26
(ii) beyond 30 metres and upto 60 metres.
30
34794
1159.83
(iii) beyond 60 metres and upto 90 metres
30
35360
1178.69
(iv) beyond 90 metres and upto 120 metres
30
35926
1197.55
(v) beyond 120 metres and upto 150 metres
30
36209
1206.98
(vi) beyond 150 metres and upto 175 metres
25
31824
1272.98
(vii) beyond 175 metres and upto 200 metres
25
32767
1310.7
(viii) beyond 200 metres and upto 225 metres
25
34417
1376.71
(ix) beyond 225 metres and upto 275 metres
50
70721
1414.43
Labour charges for lowering of ERW pipes, strainers, blank pipe etc. and fitting, fixing and jointing of tubewell assembly at site by welding in a manner as will be specified by the Engineer-in-charge.
-
-
-
(i) 200 mm NB Blank pipe, Slotted pipe & Bottom Plug
3
707
235.74
(ii) 350 mm NB Housing pipe
30
7072
235.74
(iii) 200 mm NB Blank Pipe
203
47855
235.74
(iv) 350 mm NB Housing Pipe
39
20226
518.62
Supplying, fitting, fixing including fabrication with required materials (IS -2800 Part -I with latest amendments) as directed by the Engineer-in-charge and lowering in position etc.
-
-
-
(i) 10 mm thick (350 mm x 200 mm) NB M.S. Reducer of approved quality including socket
1
3754
3754.83
(ii) MS Centre guide ( Consisting of 3 nos. 6 mm thick, 50 mm wide not les than 600 mm long and 125 mm rise of arch) of approved size and quality.
27
6237
231.02
(iii) M.S.Top cap of suitable size (8 mm thick) and approved quality for covering top of housing pipe of 350 mm NB (Top cap will be tack welded with housing pipe at 4 points 90° apart).
1
1073
1073.08
(iv) 100 mm width × 12 mm thick Sockets / Rings made from MS Flats by rolling process and double butt welding for jointing 350 mm NB Housing Pipe.
6
4328
721.36
(v) 75 mm width × 10 mm thick Sockets / Rngs made form MS Flats by rolling process and double butt welding for jointing 200 mm NB Pipe.
38
16303
429.04
Supply of gravel for use as pack in tube well of 2 mm to 4 mm. size (as per IS 4097) for gravel treatment of tubewell including screening washing, cleaning etc. of the gravels at the site complete as per direction of Engineer-in-Charge For sites at any district of West Bengalupto 180 km distance from quarry.
56.28
218675
3885.5
Development of tubewell in accordance with IS: 2800 (part 1j and IS: 11189 to establish maximum rate of usable water yield without sand content beyond permissible limit with required capacity of compressor ( about 200 psi, 375 cfm Aircompressor, actual psi and cfm depend on tube well head conditions), running the compressor for required time till well is fully developed and followed by development of tube well by over pumping with 15% to 25% higher discharge than expected discharge of tube well capacity and Vertical Trubine pump and carrying out step-drawdown test, yield test, verticality test etc. as per prescribed method all complete including hire & labour charges of compressor,
tools & accessories etc. all as per requirement and direction of Engineer -In -Charae. Depth beyond 200 metre.
1
51346
51346
Making slots of 75 mm X 1.60 mm size with a minimum clearance of 4.70 mm in between two adjacent slots over the outer surface of 200 mm NB ERW pipes (to be issued departmentally) in 10 (ten) rows (each row consisting of 96 slots) per metre length of ERW pipe with a clearance of 25 mm in between two rows as per drawing and specification including smoothening the edges after slotting, cost of transportation of ERW pipes from Departmental Store to Workshop and back to drilling site, loading, unloading and carrying by head-load wherenecessary both ways, all complete.
30
28288
942.95
Mobilisation charges for transporting upto site including loading, unloading of all plants, machinaries & equipments required for drilling, development and testing of Tubewells and also the cost of construction temporary roads over field and / or culverts, repairing existing roads and / or culverts all complete, carrying materials on head load, carts or boats as the case may be For sites within 4 km from all weather metal road.
1
7625
7625.64
Electrologging of bore hole of different dia tubewell for locating water bearing strata and saline aquifer, if any, after conducting relevant geophysical tests. All test reports and compiled data sheets should be submitted to Engineer-in-Charge (Cost is inclusive of all materials, labour & compilation of data sheets. The work should be done as per direction of Engineer-in-charge including compilation of data.)
1
8015
8015.08
Add GST @ 18% ( It 39-63)
1
138349
138349.74
Add LABOUR Cess @ 1% (It 39-64)
1
9069
9069.59
MOTOR INSTALLATION & INTERNAL WIRING
-
-
-
Fixing only Sheet Steel Main Switch(Rewirwable type)/ Change over on Flat Iron Frame/Angle Iron Frame on wall ( including all materials except equipment ) i) For 100 Amp. Main Switch
1
232
232
Fitting & fixing of Starter (Direct on Line or Star-Delta/Auto-Transformer) with Nuts & Bolts fixed on Angle iron frame on wall and making necessary connection with the electrical cables iii) Star-Delta 1Auto-Transformer Starter (Above 15 HP upto 25 HP)
1
240
240.45
Fixing only Voltmeter/Ammeter/Energy meter with screws & other fixing materials incl. making necessary holes and connections
-
-
-
Ammmeter
1
57
57
Voltmeter
1
57
57
Meter loop connection with 1.1 K.v. Gr. 31/2 core /4 core 10 Sqmm to 50 Sq mm. p.v.C./ XLPE insulated & sheathed and armoured Aluminium/Copper Cable from Meter to incomming TPN Main Switch /Terminal b) For HDTW/MDTW/MINI RLI Scheme
i) 25 Sqmm 31/2 core Core Aluminium Cable
1.5
495
330.03
Supplying & fitting 20 mm × 30 cm( 8"x 12") . E.I. danger board on wall.
2
194
97
Supplying and fixing 240 volt, 15/16 Amps. DP. Sheet Steel Main Switch on flat iron frame on wall. (Havells make.)
1
655
655
Earthing with 65 mm. dia G.I. pipe ( TATA medium) into 3.0 mts . Long and 1 no 50mmx6mm galvanized ( hot deep) steel strip ( 4 metre long) , 20mm dia x125mm long galvized bolt , double nuts double washers including finishing both ends by making holes etc. and S& F 65 mm dia G.I. pipe ( ISI medium) protection ( 3mts long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 mts. (a) For soft soil
1
4266
4266
Supplying and fixing earth bushbar of galvanized (Hot Dip) M.S. Flat 25 mm × 6 mm on wall having clearance of 6 mm. from wall including providing drilled holes on the busbar complete with G.I. bolts, nuts, washers etc. , spacing insulators as required .
0.3
51
170
Connecting the equipments to earth busbar including supplying and fixing G.I. (Hot Deep) Wire of size as below on wall/floor with stapples burried inside wall and floor as required and making connection to equipments with bolts, nuts, washers, cable, lugs etc. as required and mending good damages. ( a) 6 SWG
10
140
14
Transportation of Submersible Electro Motor Pumping set,column pipe,sluice valve,bend,kiox box,short piece etc. along with all other accessories and equipments over Pucca/Kancha Road from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends. i) 100 cum./hr capacity
1
2945
2945.78
Instalation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.) 100/150/200 cubic metre her hour capacity electro motor pumping set. Length of pump assembly of any length exceeding 18 metre length.
1
1510
1510.61
Charges for jointing water proof cable with required water proof insulation and proper jointing compound including supply of other related materials, complete in all respect.
3
127
42.43
Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] (a) average run 1.5 mtr.
1
311
311
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] (a) average run 5 mtrs. Pump Room - 1 light point, Varandah - 1 light point
2
1318
659
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.
2
86
43
Plain and finished timber planks in partition, shelves etc. fitted and fixed complete as per design (butt joints) in ground floor. (iii) 25mm thick planks (c) other Local wood [Wooden Board in size-900 mm x 1200 mm]
1.08
643
596
Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set.
1
674
674
Supplying and fixing medium gauge G.I. Pipe (ISI-Medium) protection with necessary fittings and jointing materials. a) 25 mm dia. (G.I. Pipe for passing cable)
3
600
200
Add extra charge @ 7.0 % on PWD (E) items for Dakshin Dinajpur District as per preface item A - iv of Electrical wiring volume - I of 2014.(Except item nos 68,72,78,79,80 & 84)
1
604
604.87
Add GST @ 18% ( It 67-87)
1
2737
2737.57
Add LABOUR Cess @ 1% (It 67-88)
1
179
179.46
REPAIRING OF PUMP HOUSE
-
-
-
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof .
4.18
1868
447
Dismantling RC floor roof beam etc. including cutting rods and removing rubbish as directed within a lead of 75 mtrs in ground floor including stacking of steel bar a) In ground floor including roof
2.64
5163
1956
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
62.41
1185
19
Brick work with 1st class bricks in cement
mortar (1:6) In superstructure, ground floor
3.72
19131
5142.88
125 cm. thick brickwork with 1st class bricks in cement mortar (1 : 4) in ground floor.
6.54
4410
674.33
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness withrequired bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
25.11
8236
328
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.For works in foundation, basement and
upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I.SAIL/TATA/RINL
0.4
24061
60457.03
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety
2.85
16800
5894.9
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:6 cement mortar
-
-
-
20 mm thick plaster inside
42.41
6897
162.65
15 mm thick plaster out side
71.06
10053
141.48
10 mm. thick plaster. (Ceiling, Sunshade, R.C.C Column etc.) with (1:4) cement mortar.
14
1770
126.48
M.S. gate of Jail type as per approved design made of strong M.S.
frame work, intermediate stiffeners and round / square bars or
angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc.
including necessary riveting, bolting, welding, locking and hanging
arrangements, fitting and fixing complete as per direction of the
Engineer-in -charge In ground floor(Door & Window)
1.9
19304
10160
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 25 mm. thick
13.13
3358
255.8
Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
16.67
545
32.72
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. Two coats.
127.47
6246
49
Priming one coat on steel or other metalsurface with synthetic ename oil bound primer of approved quality including smoothening surface by sand papering etc .
7.04
204
29
Painting with best quality synthetic enamel paint of approved make and brand papering etc. including using of approved putty etc. on the surface, On Steel or other metal surface With super gloss (hi-gloss) -ii) Two coats (white in shade)
7.04
542
77
Painting block letters or digits in Black Japan or any approved paint as per direction. [On pump House wall -Minimum 100 letters @ Rs-12.00/ letter ] e) Size above 7.5 cm. and upto 10 cm.
100
1200
12
Add @3.00% for carriage of constructional materials (Except it no 91,92 & 93)
1
3682
3682.88
Add GST @ 18% ( It 91-110)
1
24239
24239.46
Add LABOUR Cess @ 1% (It 91-111)
1
1589
1589.03
REPAIRING OF PIPE LINE
-
-
-
Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item include necessary trimming the sides of trenches, leveling, dressing and ramming the bottoms, bailing or pumping out of water etc. as required complete. a) Depth of excavation not exceeding 1.5 mtr.
67.59
6692
99.01
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of
finished quantity) By fine sand.
1.66
1181
711.59
Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
25.17
8155
324
Cement concrete with graded stone ballast or local gravel 40 mm down excluding shuttering in ground floor. A) Pakur Variety a) 1:3:6 Proportion
0.23
1224
5442.18
Ordinary Cement concrete (mixed 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any , in ground floor as per relevent IS Codes.b) Pakur Variety
2.52
14837
5894.9
Brick work with first class in cement mortar (1 : 6) A) In foundation and plinth.
7.56
37194
4919.88
125 cm. thick brickwork with 1st class bricks in cement mortar (1 : 4) in ground floor.
8.1
5462
674.33
Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150mm. Including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.
61.5
4059
66.01
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness withrequired bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) Above 25 mm to 30 mm thick wooden shuttering as per dicession and directon of EIC
9.18
3011
328
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:6 cement mortar 15 mm thick plaster out side
101.31
14333
141.48
Neat cement punning about 1.5 mm. thick in wall dado, floor, drain, door and window sill etc.
101.31
3314
32.72
Removing of Chokage due to sludge, mud, sand or any other forign materials deposition from the underground 110/ 140/200/315 mm dia. PVC. Pipe Line with split bamboo,wire brush, coir rope etc. along with suitable cleaning agent as necessary as per direction of E.!'C. (This item includes the cost of earth cutting & back filling of trenches and required materials for chokage cleaning but excluding
the cost for replacement & jointing of PVC pipes). For 200/140/11 0 mm dia PVC Pipe
500
15560
31.12
Repair of puncture/holes of any size in existing P.V.C. Pipeline of HDTW/MDTW/RLI by placing half round P.V.C. Pipe section of required size to cover the holes/ puncture having adequate bearing on all sides and joining the half round section with solvent cement after roughening the surface with wire brush, emery paper to make the joint leak proof as per direction of Engineer-in-Charge (cost inclusive of supplying solvent cement at site and transportation of required length of P.V.C.Pipe to be issued departmentlly, for cutting half round section, from Sub-Divisional Stores to site)
-
-
-
200 mm dia. P.V.C. Pipe line
6
503
83.92
140 mm dia. P.V.C. Pipe line
8
475
59.41
Labour charge for replacement of damage P.V.C. Pipe of any length in the Pipe line of HDTW / MDTW / RLI with a new piece of pipe to be issued departmentally after taking out the damage pipe from the existing pipe line by cutting with hacksaw and joining the new pipe with the existing pipe using two numbers couplers of 4 Kg./cm2 capacity after roughening up surface with wire brush, emery paper and applying the solvent cement (cost inclusive) to make the joint leakproof as per direction of Engineer-in-Charge excluding supply of the couplers as per I.S.I. Specification at site and transporting departmentally issued pipes from Sub-Divisional Store to the Site.
-
-
-
200 mm dia. P.V.C. Pipe line
8
1999
249.88
140 mm dia. P.V.C. Pipe line
30
5997
199.91
Labour charge for replacement of different P.V.C. Accessories in different portion of P.V.C. Pipeline of HDTW / MDTW / RLI including taking out of the existing damage accessories, and excluding the supplying the new accessories of 4 Kg./cm2 capacity and as per I.S. specification at site and fitting,fixing the same by joining with solvent cement (cost inclusive) after roughening up the surface with wire brush, emery papers etc., to make the joint leak proof all complete as per direction of Engineer-in-Charge.
-
-
-
160 mm X140mm. P.V.C. Reducer
12
961
80.15
140 mm X 140 mm X 160 mm. P.V.C.Tee
12
1437
119.75
140 mm. dia. 90°/60° / 45° long bend
12
1197
99.75
160 mm. dia.flanged tail piece fitted with Alfa-Alfa valve
12
1561
130.13
Labour charges for fitting, fixing150 mm. Dia. Alfa-AIfa valve with 160 mm. dia. P.V.C. riser pipe with the help of flanged P.V.C. tail-piece by joining the P.V.C. End of Tail-piece and riser pipe with coupler and flanged end of Tail-piece and Alfa-Alfa valve with rubber insertion, nuts and bolts etc. complete.
12
1346
112.21
Gas cutting to required size up to 8 mm thick MS plate , MS channel , angel etc. including labour charges , hire charges for all tools and plants.
4
743
185.76
Patch/Doubling works complete with M.S. plate including welding, gas cutting, fitting, fixing complete. (c) Electric welding charges upto 8 mm M.S. plate, M.S. channel etc. and other member of the barge including hiring charges of all tools and plants
4
1738
434.7
Supplying, fitting and fixing of 50 mm Dia G.I. pipes of Medium quality
0.5
270
540
Supply of 50 mm Dia G.I. plug
1
86
86
Add @3.00% for carriage of constructional materials (Except it no 114 & 121)
1
3677
3677.72
Add GST @ 18% ( It 114-142)
1
24663
24663.63
Add LABOUR Cess @ 1% (It 114-143)
1
1616
1616.84
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements