Variable Energy Cyclotron Centre Tender

LT Cable straight through Joints: Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for 3.5C x 300 Sq.mm XLPE aluminium conductor cable of 1.1 KV grade as per instructions of the Engineer In charge of the work.

LED light fitting: Supply, installation testing and commissioning of recessed mounted type LED luminaires as per Technical specifications in clause no. 4 of PART-E and instructions of the Engineer In charge of the work.

M S structure: Supply, facbrication & installation of Structural steel work with angle, channel, beam, MS plate, flat, pipes, square bars etc. conforming to IS-2062, IS-800 & IS-806 for making cable tray/bridge/platform etc. for passing of cable over road/walls/roof top etc. at all level, location, slope of required shapes, sizes including supplying, cutting, fabricating, hoisting, welding, erecting, making holes/chases by drilling (up to 25mm dia) including providing nut bolts (up to 20mm dia) wherever required and fixing/embedding in position in concrete/brick work with necessary hold fasts/screws & raw plugs and finishing the concrete/brick work after fixing/embedding, preparing surface mechanically for removal of rust, dirt, flakes etc. including painting two coats of 1st quality synthetic enamel paint of approved make and colour on all surfaces over a coat of approved red oxide zinc chromate primer, complete as per direction of Engineer-in-Charge of the work.

RCC foundation: Making Reinforced Cement Concrete (RCC) foundation (1:1.5:3) as per attached drawing (Annexure -IV of PART-E) for base of MS structure to make a bridge for passing of cable over road including reinforcement approx. 60Kg, excavation up to 1.5m depth from the existing ground level (EGL), ramming for desired compaction, backfilling with selected excavated earth in layers not exceeding 150mm thick, watering, consolidation etc. providing and laying single layer brick flat soling (BFS) & 75mm thick PCC (1:2:4) with necessary shuttering for concreting, all materials, labours, tools, tackles etc. completed to proper line, level, inserting/fixing MS foundation bolts into the pedestal, finishing to the best workmanship as per specifications, drawing and as directed by Engineer-In-Charge.