Uttar Banga Krishi Viswavidyalaya Tender

Supplying Office chair: Seat Back Assembly – The seat and back are made up of 1.2 +_0.1 cm,thick hot pressed plywood measured and upholstered with fabric upholstery cover and moulded polyurethanefoam.The back foam is designed with contoured lumber support for extra support.The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE 47.5 cm. (W) * 58.0 cm (H) and SEAT SIZE 47.0cm(W)*50.0cm(D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +_ 2 Kg/m3 and hardness load of 16_+2 Kgf as per IS:7888 for 25% compression. ARMRESTS: The one piece armrest are injection moulded from black Copolymer Polypropylene. CENTER TILT SINCRO MECHANISM : The mechanism is designed with the following feature. 360 degree revoling type. Upright position locking Tilf tension adjustment Seat/back tilting ratio of 1:3 PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0_+0.3cm. TELESCOPIC BELLOW ASSEMBLY : The bellow is 3 piece telescopic type and injection moulded in black polypropylene. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33% glass filled Nylon66 and fitted with 5 nos twin wheel castors, The pedestal is 66.3_+0.5cm. Pitch center dia(76.3_+1.0cm with castors) TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in black nylon. 470 x 500 mm

Supplying Visitor chair: The seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with changeable fabric upholstery covers and moulded Polyurethane foam, together with moulded backspine cover. The back foam is designed with contoured lumbar support for extra comfort. * BACK Size: 43.0cm. (W) X 46.0cm. (H) *SEAT Size: 47.0cm. (W) X 50.0cm. (D) Overall Dimension: 59.0cm(W) X 58.0 cm(H)X88 cm; Seat Height: 45 Cm The HR Polyurethane foam is moulded with density = 45 +/2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The armrests are made of black integral skin Polyurethane wtih 5070 Shore 'A' Hardness and reinforced with M.S. insert. The P.U. armrests are then fixed to black powdercoated (DFT 4060 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. The understructure is made of dia 2.54 +0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 4060 microns). The delivered item shall be complete in all respect. 470 x 500 mm

Supplying and fixing of window vertical blinds which will have- a) Head Rail - The head rail shall be extruded aiurniniurn alloy measuring 45 mm wide and 25 mm high with a minimum wall thickness of 1.10 mm and shall be specially desiqned with curve shaped front face. The head rail shall house all operating components of the blind and shall be powder coated. b) Carriers - The carriers shall be made of detrinacetal resin and shall traverse on two wheels along the guide slots in the head rail.. The spacing of each carrier shall be controueo by a plastic spacer fixed to the carrier body providing a minimum louver overlap of 12 mm in the fully closed position.. Louvers shallt raverse left to right, right to left or split by means of the traverse cord.d) Other Hardware - Louvers shall incorporate hem pockets at the top sewn with monofilament clear thread for inserting the hanger and bottom weight. Hangers shall be made of nylon and bottom weight shall be made of galvanized steel moulded with nylon. Bottom weight shall be connected together on both sides with a plastic bead link chain. The traverse cord shall be tensioned by a cord weight, which shall be removable without detaching from the head rail.e) Installation Bracket - Installation bracket shall be made of spring-tempered steel with a front flange and rear tab to snap-in at the top of the head rail. f)Fabric vanes/blinds shall be made from -84% polyester, 10% cotton and 6% flex woven in a natural weave pattern. The fabric shall be 0.50 rom thick, of weight 220 gm/sq.m. and with a lining fused on the reverse side of the 'fabric to give stiffness and stability to the blind and to reduce the intensity of sunlight. 500 X 1350 mm, 1200 x 1350mm,

Providing and fixing the Sofa as per the drawing. It shall be standing on beam with side frame assemblies. The LH/RH side frame shall be fitted to the two ends of the ST/BK mounting frame to form the leg assembly. It shall be made of MS. E.R.W. tube dia 4.44 cm. (1.75”) x 14 BG. thick and chrome plated. The ST/BK mounting frame assy. holds the two side frames together. The mounting frames, 2nos shall be used to connect the side frames. The mounting frame shall be made of MS. E.R.W. tube dia.5.08cm. (2”) x 10BG thick black painted. The ST/BK shall be mounted on 14 BG thick 2cm x 4cm Recta tube which shall be welded on the beam of ST/BK mounting frame. The ST/BK assembly shall consist of 12mm thick plywood insert with Polyurethane foam having density = 45 +/- 2 Kg/cm3 and hardness of the P.U. foam = 18 to 22 Kg on Hampden m/c for 25% compression of the foam. The complete moulded ST/BK assembly shall be covered with replaceable fabric upholstery cover. Seat/Back shall have dimensions 54.4cm (W) x 46.7cm (D) x 12.5cm (T). The side frames shall be fitted with front and rear bottom shoes made of injection moulded polypropylene. All external surfaces shall be chrome-plated and withstands min of 100hrs in salt spray test. Fabric used shall be velvetine plus a stain repellant fabric. The velvet fabric can be vacuum cleaned in order to remove dirt & grit from the fabric surface. Upholstery covers shall be made from velvetine fabric should not be soap washed or dry cleaned. The complete moulded ST/BK assembly shall be covered with a replaceable fabric upholstery cover. The side frames shall be fitted with front and rear bottom shoes made of injection moulded polypropylene. All external surfaces shall be chrome-plated and withstands min of 100hrs in salt spray test. Fabric used shall be velvetine plus a stain repellant fabric. The delivered item shall be complete in all respect 3-Seater Sofa: 1830W x 783D x 750H and seat height 415 mm

2-Seater Sofa: 1370W x 783D x 750H and seat height 415 mm

1-Seater Sofa: 685W x 783D x 750H and seat height 415 mm

Providing and fixing Office Table made out of 25mm thick block board as vertical support and 19mm thick BWP Plywood Board as Top,Modesty Panel, Drawers etc. All external surfaces of the vertical supports shall have 1mm thick Laminate as per approved brand and shade. Front surfaces of Table Top and Modesty Panel shall have 1mm thick Laminate of approved brand and shade. Internal surfaces of the Table Top and Modesty Panel shall have balancing laminate of 0.8mm thick (Ivory/white) of approved brand. Drawer shall be complete with soft closing telescopic channel, S.S. handle and Locking arrangement. Inside of the drawer shall have synthetic enamel paint. Table top shall be fitted with Key Board Tray of appved brand and sample. All the exposed edges of the Ply Boards shall have teak wood lipping with melamine polish. The Table should be complete with all necessary magnetic catchers, hardwares, screws etc. of approved brand and should be complete in all respect. 1500 x 750 mm

Providing and fixing Office Side Table made out of 19mm thick BWP Plywood Board. The unit shall have a combination of Drawers and Shutters as per drawing made with19mm thick BWP Plywood Board. All external surfaces of the unit (except back) shall have 1mm thick laminate of approved brand and shade. All internal surface (except shutters) and back shall be painted with synthetic enamel paint of approved brand and shade. Back side of the shutters shall have 0.8mm thick balancing laminate (ivory/white) of approved brand. Shutters shall be complete with soft closing hinges, S.S. Handle and locking arrangements. Drawers shall have soft closing telescopic channels, S.S. Handle, and Locking arrangement.All the exposed edges of the Ply Boards shall have teak wood lipping with melamine polish The Side Table should be complete with all necessary magnetic catchers, hardwares, screws etc. of approved brand and should be complete in all respect. 1200 x 450 mm

Providing and fixing Office Back Unit made out of 19mm thick BWP Plywood Board. The unit shall have a combination of Drawers and Shutters as per drawing made with19mm thick BWP Plywood Board. All external surfaces of the unit (except back) shall have 1mm thick laminate of approved brand and shade. All internal surface (except shutters) and back shall be painted with synthetic enamel paint of approved brand and shade. Back side of the shutters shall have 0.8mm thick balancing laminate (ivory/white) of approved brand. Shutters shall be complete with soft closing hinges, S.S. Handle and locking arrangements. Drawers shall have soft closing telescopic channels, S.S. Handle, and Locking arrangement.All the exposed edges of the Ply Boards shall have teak wood lipping with melamine polish The Side Table should be complete with all necessary magnetic catchers, hardwares, screws etc. of approved brand and should be complete in all respect. 1800 x 350 mm

Providing and fixing Office Side Table made out …..etc same as item 2.1 2100 x 350 mm

Providing and fixing Office Side Table made out …..etc same as item 2.1 2700 x 350 mm

Providing and fixing Side Table made out of Epoxy powder coated ERW tubes 20mm x 20mm x 1.6mm, 16mm x 16mm x 1.2mm (IS:7138: 1973) and 12mm thick toughened glass top as per drawing. The leg support shall have level adjustor as specified. All the metal parts shall have epoxy powder coating as per related IS. 600 x 600 mm

Fabrication and installation of Wall Cabinet made out of 25 mm thick Block Board as main vertical and horizontal supports. The unit shall have a combination of four / five vertical and four horizontal compartments and drawers with Shutters as per drawing made with 19 mm thick BWP Plywood Board. All external surfaces of the unit (except back) shall have 1mm thick laminate of approved brand and shade. All internal surface including shutters and back shall have 0.8mm thick balancing laminate (ivory/white) of approved brand. Shutters shall be complete with soft closing hinges, 300 mm S.S. Handle and locking arrangements. Drawers shall have soft closing telescopic channels, 150mm S.S. Handle, and Locking arrangement.All the exposed edges of the Ply Boards shall have teak wood lipping with melamine polish The cabinet shall be complete with all necessary magnetic catchers, hardwares, screws etc. of approved brand and should be complete in all respect. 3845 x 2100 x 450 mm

Fabrication and installation of Wall Cabinet…..etc same as item 2.5 2845 x 2100 x 450 mm

Providing and fixing TV Canbinet made out of 19mm thick BWP Plywood Board. The unit shall have single 8 shutters with S.S. Handle and S.S. hinges. All surfaces of the unit (except back) shall be finished with 1mm thick laminate of approved brand and shade. All internal surfaces and back surface shall be painted with synthetic enamel paint of approved brand and shade. All the exposed edges of the Ply Boards shall have teak wood lipping with melamine polish. The Unit should be complete with all necessary magnetic catchers, hardwares, screws etc. of approved brand and should be complete in all respect.. 1350 x 900 X 150 mm

Providing and fixing Wall Paneling as per drawing , in general it shall be made of Aluminium extruded sections of size 50 x 25mm x 1.5mm thick in both horizontal and vertical direction at 600 mm c/c spacing, frame shall be fixed at required depth as per drawing. The framework shall be covered with single layer of 8mm thick BWP plywood on one side. The plywood board shall be covered with 1 mm thick laminate of appoved shade and make designed with vertical and horizontal groove lines and patterns as per drawings or direction of the EIC. The rate shall be inclusive of polishing, varnishing, painting with one coat of primer if required. The panelling shall have provision for lights/ switches etc as per instruction of EIC . The cost of necessary hardware's, adhesives, wastages etc; as required for complete the work shall be included in the rate. Actual laid area only will be measured and paid.

Fabrication and installation of Information desk made out of 25mm thick block board as vertical support and 19mm thick BWP Plywood Board as Top, Sides,Modesty Panel, Drawers etc as per drawings. All external surfaces of the vertical supports shall have 1mm thick Laminate as per approved brand and shade. Front surfaces of Table Top and Modesty Panel shall have 1mm thick Laminate of approved brand and shade. Internal surfaces of the Table Top and Modesty Panel shall have balancing laminate of 0.8mm thick (Ivory/white/ any other) of approved brand. Drawer shall be complete with soft closing telescopic channel, S.S. handle and Locking arrangement. Inside of the drawer shall have synthetic enamel paint. All the exposed edges of the Ply Boards shall have teak wood lipping with melamine polish. The Table shall be complete with all necessary, hardwares, screws etc. of approved brand and shall be complete in all respect. The table shall have 10 mm thick clear glass of height 450 mm in the edge designed with frosted films as per drawing. The modesty panel in the side and front shall be designed with frosted glass panels fitted with metal studs with led back lights. 4450 X 450 X 800 (H) mm.

Fabrication and installation of furniture filling table as per onsite measurements. All sides, internal dividers, top & bottom shall be made up of 19 mm BWP Ply Board, rear, back of cabinet shall be made up of 12 mm BWP Ply Board, all front shutters shall be made up of 19 mm BWP Ply Board, wherever required additional hardwood structural framework shall be used to strengthen the cabinet as per the instruction of EIC, Necessary cutting of cabinet rear back/sides shall be required as per the requirement and fixing of electrical and networking switches and I/Os. All external exposed surfaces of cabinet excluding top shall be finished with 1 mm thk. laminate (external) of approved shade and make. All internal surfaces of cabinet shall be finished with 0.8 mm thk laminate (balancing) including back of approved shade and make. Lipping of all edges shall be of 4mm thk. wood (TW). The shutters (if any) shall be fitted with auto closing hinges (which shall open upto 90-110 degrees), magnetic catchers, tower bolts, stoppers, shutter handles and locking system. These units will fill the gaps between two corner furnitures, furniture with walls , columns etc and have to be fabricated as per site conditions and as per the direction of EIC. Granite topping -The top of the table shall be finished with 18 to 20mm thk polished granite slab of approved shade.Necessary cutting of holes may be required for running of electric /networking cables. The front edge of the slab shall be moulded but the side edges shall be flushed with the table to

Installation work composed of sculptures, murals, motifs etc on walls of the void spaces (two spaces) as well as indoor landscaping work in the courtyards at ground floor including suitable lighting arrangement as necessary and other works like painting, polishing etc required to complete the job. This item will be done under the supervision of EIC and the works will include but not limited to each and every item described that are required to complete the work in full. Size of each Void spaces 5.40mtrX3.90mtr

Providing and fixing Centre Table made out of Epoxy powder coated ERW tubes 20mm x 20mm x 1.6mm, 16mm x 16mm x 1.2mm (IS:7138:1973) and 12mm thick toughened glass top as per drawing. The leg support shall have level adjustor as specified. All the metal parts shall have epoxy powder coating as per related IS. 1000mm x 600mm

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. b) Extra rate for each addl. Floor over the rate of ground floor

Dismantling all types of plain cement concrete works,stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. a) upto 150 mm. Thick

Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. a) In ground floor including roof.

Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. b) Extra rate for each addl floor over the rate of ground floor.

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) With 1:4 cement mortar. (b) 15 mm thick plaster.

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand. (1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receiveDistemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor). (a) One Coat. i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) (Two coats). ii) Luxury Quality

Cutting chase upto 125 x 150 mm. and subsequent mending of damages. (a) in brick wall [Cement-3.6 Kg/Mtr]

Cutting chase upto 125 x 150 mm. and subsequent mending of damages. (b) in concrete wall [Cement-3.6 Kg/Mtr]

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor) II) With Polymerised Adhesive [6 mm thick] & epoxy grouting materials for filling joints including spacer-2 mm [Applied directly over finished artificial stone floor/ mosaic etc.]. (B) Light Colour.