Uttar Banga Krishi Viswavidyalaya Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Uttar Banga Krishi Viswavidyalaya - UBKV Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Sep 2022
Closing Date27 Sep 2022
Tender Amount₹ 1,06,21,363
Costs
EMD
₹ 2,12,427Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_UBKV_402903_6Bid Award Id
ViewTender No
NIeT-03/2022-23Tender Authority
Uttar Banga Krishi Viswavidyalaya ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
212
-
487.9
Single brick flat soling with picked jhama bricks including ramming and dressing bed to proper level and filing joints with powdered earth or local sand.
476
-
364.25
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL
6.13
-
67495.38
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety
49
-
5986.12
Hire and labour charges for shuttering withcentering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation
271
-
231.9
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety
48
-
5392.89
250 mm thk. Brick work with 1st class bricks in cement mortar (6 : 1)- a) In Foundation & Plinth (GL.TO P.L)
28
-
5564.37
Pre-Constructional Anti-termite Treatment: Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS-6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated).
210
-
154.97
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel. I. SAIL/ TATA/RINL.i)Ground Floor
7.63
-
67495.38
ii)First Floor
8.08
-
67981.79
Hire and labour charges for shuttering withcentering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) b)Above 30 mm & upto 37 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work.i)Ground Floor
584
-
410.63
ii)First Floor
602
-
430.98
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety.i) Ground Floor
61
-
5986.12
ii) First Floor
77
-
6093.58
40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately) for underground water retaining structures.
34
-
303.16
125 mm. thick brick work with 1st class bricks in cement mortar (4 : 1) in all four floor.Considering only toilet partition wall.i)Ground Floor
387
-
764.69
ii)First Wall
431
-
778.27
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).10 mm (4:1).i)Ground Floor
253
-
143.66
ii)First Floor
248
-
148.19
15 mm (6:1).Ground Floor
667
-
160.63
ii)First Floor
667
-
165.16
20 mm (6:1).Ground Floor
403
-
184.39
ii)First Floor
396
-
188.91
Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick).i)Ground Floor
920
-
138.01
ii)First Floor
915
-
138.82
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface.Two Coats.i)Ground Floor
920
-
79.18
ii)First Floor
915
-
79.18
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface toreceive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats.i)Ground Floor
403
-
51.02
ii)First Floor
396
-
51.82
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) Premium 100% Acrylic Emulsion.i)Ground Floor
403
-
95.02
ii)First Floor
396
-
95.82
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &fint mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(b) Area of each tile above 0.09 Sq.m. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m &.i)Ground Floor
26
-
837.09
ii)First Floor
16
-
842.74
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(b) Area of each tile above 0.09 Sq.m. b) Wall.i)Ground Floor
126
-
843.88
ii)First Floor
210
-
849.53
Wood work in door and window frame fitted and fixed inposition complete including a protective coat of painting atthe contact surface of the frame exluding cost of concrete,Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Siliguri.i)Ground Floor
0.27
-
96274.17
ii)First Floor
0.27
-
96500.41
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.(b) 32 mm thick shutters (single leaf).i)Ground Floor
14.7
-
2668.5
ii)First Floor
14.7
-
2668.5
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door Spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film Natural white.i)Ground Floor
34
-
435.51
ii)First Floor
34
-
435.51
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 6mm thick clear glass.i)Ground Floor
29
-
687.77
ii)First Floor
15
-
687.77
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately).i)Ground Floor
56
-
32.8
ii)First Floor
56
-
32.8
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:(v) 100 x 63 x 3.2mm.i)Ground Floor
28
-
81.45
ii)First Floor
28
-
81.45
(i) Door stopper.(Brass).i)Ground Floor
7
-
132.35
ii)First Floor
7
-
132.35
(c) Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete.i)Ground Floor
7
-
2148.15
ii)First Floor
7
-
2148.15
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(v) 150mm long x 12mm dia. bolt.i)Ground Floor
7
-
99.55
ii)First Floor
7
-
99.55
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(vii) 150 mm grip x 12 mm dia rod.i)Ground Floor
14
-
125.56
ii)First Floor
14
-
125.56
Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.i)Ground Floor
2
-
1955.84
ii)First Floor
2
-
1955.84
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, ang labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white.i)Ground Floor
280
-
506.78
ii)First Floor
280
-
506.78
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. i) 4mm thick clear glass.i)Ground Floor
36
-
450.22
ii)First Floor
36
-
450.22
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.i)Ground Floor
8.36
-
11335.76
ii)First Floor
8.36
-
11449.11
a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
104
-
32.8
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)
104
-
81.45
Supplying, fitting & fixing Rain Water UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.(ii) 110 mm. Dia.
73.5
-
283.93
a) Plain Tee (ii) 110 mm. Dia.
10
-
194.57
d) Shoe (ii) 110 mm. Dia.
10
-
125.56
c) Bend 87.5 degree
20
-
180.99
Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.Note: Cement 0.152 cum per 100 sqm.
95
-
38.46
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.
0.3
-
81803.86
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:-a) With 0.5 mm thick sheet
35
-
1013.56
Labour for Chipping of concrete surface before taking up Plastering work.i)Ground Floor
347
-
23.76
ii)First Floor
342
-
23.76
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(B) Light Colour.i)Ground Floor
247
-
1437.76
ii)First Floor
232
-
1437.76
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana. (iv) Area of each slab/tile exceeding 1.00 sq.m (This item to be executed on specific permission of Superintending Engineer).i)Ground Floor
40
-
2421.9
ii)First Floor
27
-
2421.9
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.i)Ground Floor
33
-
291.85
ii)First Floor
33
-
291.85
Extra cost of labour for Marble Stone Floor in treads of Steps.i)Ground Floor
25
-
255.65
ii)First Floor
25
-
255.65
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx).i)Ground Floor
10
-
10267.9
ii)First Floor
10
-
10267.9
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (ii) Thickness of laminate 1 mm.i)Ground Floor
29
-
778.27
ii)First Floor
29
-
778.27
Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor.(ii) 6mm
58
-
1044.1
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP). (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating).i)Ground Floor
26
-
2252.22
Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width x 32 mm thickness (the door frame is to be made with single piece extruded solid pvc profile whereas no sheet pasted profile shall be applied for door frame fabrication) and shall be fixed to wall as per instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws.
50
-
546.37
Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge. a) Factory made Single piece non decorative extruded PVC profiles door shutter(mat / plain finish)
16.8
-
2656.06
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white.) a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm
321
-
442.3
Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No. S10221114-P Trap (CRUSE SET) of CERA or equivalent.)
6
-
6160.52
Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.)
6
-
2721.67
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(v) 900 mm long
6
-
166.29
Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.) White
6
-
1469.43
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one C.P. pillar cock of approved make, C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(iii) 630 mm X 450 mm size
7
-
3687.71
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
7
-
1693.41
Supplying, fitting and fixing pillar cock of approved make.(g) CP Sink Cock with Regular Swinging Spout (Table Mounted Model) (Equivalent to Code No. 5357 of JAQUAR or similar brand).
1
-
1156.09
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm.
7
-
693.43
Supplying, fitting and fixing porcelain soap tray of approved make.
(i) Recessed soap tray of size 150 mm X 150 mm
7
-
382.35
Supplying, fitting and fixing glass shelf with aluminium guard rails.
(a) Ordinary type with 5.5 mm sheet glass.(ii) 600 mm X 125 mm
7
-
542.98
Supplying, fitting and fixing Tooth brush and Tumbler holder of approved make of size 140 mm X 65 mm (porcelain).
2
-
408.36
Supplying, fitting and fixing liquid soap container.(c) Fibre glass
7
-
212.67
Supplying, fitting and fixing shower of approved brand and make.(b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
2
-
1597.25
Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass.(iii) 25 mm dia. and 750 mm long
7
-
537.32
Supplying, fitting and fixing C.P. Wall Flange
19
-
72.4
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(b) Sink with drain board 1050 mm X 450 mm X 180 mm
1
-
5662.79
Supplying, fitting and fixing bib cock or stop cock.(d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand).
20
-
1078.03
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992.(A) (i) Single Socketed 3 Meter Length.(b) 110 mm
80
-
330.31
(B) Fittings.(iii) Door Tee.(b) 110 mm
20
-
220.58
ix) Bend 45º.(b) 110 mm
20
-
100.68
x) Bend 87.5º(b) 110 mm
20
-
135.74
xv) Vent Cowl.(b) 110 mm
20
-
37.33
xvi) Pipe Clip.(b) 110 mm
100
-
23.76
(ii) Plain Tee.(b) 110 mm
10
-
96.15
v) Plain Y.(b) 110 mm
10
-
233.03
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.(A)Above ground.(ii) 110 mm dia.
40
-
64.48
(B)Under ground.(ii) 110 mm dia.
40
-
95.02
Supplying, fitting & fixing Aluminium domical grating.(i) 150 mm
6
-
83.71
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work.40 mm dia
60
-
330.31
50 mm dia
20
-
434.38
(b) For Concealed Work.20 mm dia
120
-
178.73
25 mm dia
80
-
231.9
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (Q) Ball Valve.25 mm dia
6
-
270.36
40 mm dia
2
-
625.55
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.. i) With Pakur variety (Other than SAIL/TATA/RINL).
6
-
7537.19
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(Other than SAIL/TATA/RINL)
2
-
17499.66
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe & Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(iii) For 30 users.A) With Pakur variety. (Other than SAIL/TATA/RINL)
1
-
66741.93
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.(d) 2000 litre capacity
2
-
11802.94
Labour for hoisting plastic water storage tank.(ii) Above 1500 litre upto 5000 litre capacity.a) Upto 1st story from G.L.
2
-
174.2
(b) Extra for each additional story
4
-
81.45
Labour for punching hole in plastic water storage tank upto 50 mm dia.
5
-
21.49
(d) Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).).
2
-
2703.57
(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
6
-
1415.13
f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
12
-
1435.49
c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).
7
-
969.44
CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand).
2
-
2780.49
Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) in19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light /fan / ex-haust fan points with Modular type switch ( Legrand) fixed on Modular GI switch boaed with top cover plate flushed in wall incl. mending good damages to flushed in mending n good damages yo original finish. Total points -77 nos ( Ceiling fan - 12, Tube light - 29. wall bracket fan -1, exhaust fan- 3,call bell- 2, surface square/round light fittings- 27 and Batten/angle holder - 03) . Average length- 8 mtr.
77
-
1298.22
Distribution wiring in 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) inin 19 mm bore, 3 mm thick polythene pipe complete with allaccessories embedded in wall to 240 V, 6A 3/5 pin plug point incl. S& F 240 V, 6A , 3/5 pin Modular type Socket & switch ( Legrand ) fixed on Modular GI switch boaed with top incl. earth continuity wire with Modular top cover plate flushed in wall incl. mending good damages to original finish. On board socket
12
-
295.75
S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) of the following sizes in the prelaid polythene pipe and by the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.a) 3x1.5 sq.mm for additional 6 Amp. Plug and SPN DB to Switch board ,
200
-
57.01
b) 2x 2.5 +1x1.5 Sq mm for Computer and power points,
450
-
77.2
c) 2x4 + 1x2.5 Sq. mm for AC and Geyser.
250
-
112.84
Fixing only single LED tube light fitting suspended 25 -30 cm bellow the ceiling with 2 No 20 mm dia EI condit (14 SWG) supports incl. S&F EI conduit,and complete with all accessories directly on ceiling through U type iron clamp and suitable size of MS fastene and S&F 3x1.5 sq mm flexibale copper wire of 1.5 mt .
29
-
254.18
Fixing of 240 volt, 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 3x1.5 sq.mm. flexible copper wire.
12
-
78.39
Fixing of 240 volt 300 exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:
3
-
390.77
Fixing of 240 volt 300 mm wall bracket fan in wall including all necessary nut, bolt , fan base plate etc. and making good damages and smooth cement finish, painting etc.if required.
1
-
109.27
Supply & Fixing of 300 mm (12") Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc.
3
-
229.24
S & F. 240V, 2 Modular socket type fan regulator (Step type) (Crabtree) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
12
-
459.66
S & F. MS fan clam of two piece type for RC ceiling fabricated from 40 mm x 9 mm MS flat incl. making good damages to building roof with satisfactory finishing and painting.
6
-
287.44
Fixing of 18 watt LED surface mounted light fittings on wall/ceiling by screws etc. .
27
-
66.51
Fixing outdoor type LED light fitting on wall including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 3x1.5 sq.mm cu PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from ceiling rose to the fitting, without control switch, incl. making connections and painting.
4
-
1662.86
Supply & Fixing angular batten holder (Anchor) ON PVC round block /round Bakelite on wall / ceiling.
3
-
45.13
Supplying and fixing double door 12 way Vertical TPN MCB DB for 415 volt, 160amp. MCCB enclosure incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand).
1
-
16652.4
Supplying and fixing 415 V, 160 amp, Four Pole MCCB of Breaking capacity 25kA /35kA with fixed thermal and fixed magnetic / adjus- table thermal and fixed magnetic setting in exis ting DBs / enclosure and necessary connection (Legrand).
1
-
11591.35
Supplying and fixing 415 V, TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary con nection (Legrand).415V, TP, 63A MCB
6
-
1700.87
415V, TP, 32A MCB
6
-
648.52
Supplying and fixing 63 amp,8 way double door HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and painting for AC, SPNDB and Geyser.(Make- Legrand )
2
-
4981.47
Supplying and fixing 415 V 63 A, 4 pole MCB Isolator on din rail of existing DBs and necessary connection.( Legrand)
2
-
1003.66
S & F. 10-32 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB.
48
-
225.67
Supplying and fixing double-door (2+8) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand)
2
-
1754.32
S & F. 240 volt, 40 amp. MCB DP Isolator on din rail of existing DB and necessary connection ( Legrand).
2
-
414.53
S & F. 10-32 amp, 240V SP MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Havell’s). For SPN MCB DB.
16
-
225.67
Supply & fixing of 3 nos. 240 volt, 6 amp. Modular plug socket with 3 nos, 6 A modular switch Modular plug socket with switch in a single modular PVC/GI switch board (Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc. for TV.
1
-
1343.36
Supply & fixing of 2 nos. 240 volt, 6 amp. Modular plug socket with 2 nos, 6 A modular switch & 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC/GI switch board ( Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc. for computer.
10
-
1437.19
Supply & Fixing 240 V, 6/16 A, 3/5 pin Modular type plug socket (Legrand) with 16A Modular type switch, without plug top on GI Modular type switch board with top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. for power points.
18
-
541.62
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Legrand ) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
4
-
635.45
Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand) with 25A Modular switch type DP MCB ('C' Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc
4
-
931.2
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. Make- Legrand. for three phase power .a) 4 way for 3-phase instrument .
3
-
375.33
Supplying and fixing 415 V 32 A, MCB 4 pole Isolator on din rail of existing DBs and necessary connection.( Legrand) for three phase poert supply.
3
-
741.16
Earthing with 50 mm dia. ISI medium GI pipe 3.64 mm thick x 3.04 mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia. GI pipe protection (1 mt. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mts. below the ground level. 2 nos for existing panel and rest for proposed panel.
4
-
1626.04
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
200
-
77.2
Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire
200
-
93.83
Laying of following cables after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.a) 3.5 core 25 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from VTPN DB to HTPN DB.
50
-
150.85
b) 4 core 16 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN TO SPN MCB DB.
75
-
150.85
c) 2 core 16 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN TO SPN MCB DB.
20
-
150.85
Laying of one No. cable 3.5 core 95 sqmm in underground trench 460mm wide x 760mm average depth, with brick pro tection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed from prosed panel at existing panel room to proposed panel at ground floor of proposed office cum training hall.
117
-
204.29
S&F compression type gland complete for following XLPE/PVC armoured cables.3.5 core 95 Sq. mm
4
-
325.45
3.5 core 25 Sq. mm
4
-
180.54
4 core 16 Sq. mm
6
-
156.78
2 core 16 Sq. mm
4
-
136.59
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.3.5 core 95 Sq. mm
4
-
368.21
3.5 core 25 Sq. mm
4
-
130.65
4 core 16 Sq. mm
6
-
112.84
2 core 16 Sq. mm
4
-
68.89
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
4
-
256.56
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required..50 mm dia.
12
-
391.96
80 mm dia.
12
-
628.33
Supply and fixing 240 volt AC/DC superior type multitune (min 10 nos tune) Call bell (Anchor or equivalent) with selector switch for single/Multi Tunes mode Batter operated on HW/PVC/ Bakelite board including S&F board and battery as required.
2
-
349.2
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells).1.1 kv grade, 3.5 core ,95 sq mm XLPE/PVC armoured aluminium cable,
117
-
1315.91
1.1 kv grade, 3.5 core ,25 sq mm XLPE/PVC armoured aluminium cable,
50
-
478.93
1.1 kv grade, 4 core ,16 sq mm XLPE/PVC armoured aluminium cable.
75
-
391.43
1.1 kv grade, 2 core ,16 sq mm XLPE/PVC armoured aluminium cable.
20
-
291.27
Supply of 230volt, 1200 mm sweep , AC ceiling Fan ( Orient - Summer King, SummerCool, Summer Breeze,)
15
-
3014.79
1Supply of 230 volt, 300 mm. sweep, 80 Watt, 1420 rpm heavy duty exhaust Fan ( EPC, MARATHON) [Approved by PWD]
3
-
5073.43
Supply of 230 volt, 450 mm sweep Wall mounted Fan ( Orient Tornado- Wall -11)
2
-
5180.75
Supply of 240 volt, 120 watt LED outdoor type light fittings (Cat no – Crompton – PLUTO NEO – model LFLN-120 CDL/60-M or equivalent Havells, Philips).
4
-
9210.23
Supply and fixing of supper Quality picture/ mirror light wall lamp without lamp . Size- 1.5' / 18" inbuilt driver/adapter, color- Warm White , Diameter - 34 cm, Hight - 10 cm , Weight- 0.499kg. Make- Philips, Havells or equivalent .
1
-
1706.55
Supply and fixing of 240 volt, 10 lts storage water heater including S&F nuts, bolts, washer as required. Make- Venus Model- Magma Plus-10 GV., Color- Ivory, Watt- 2000, Voltage- 220 to 240, Heating element- Ceremic Glass lined.
1
-
9557.81
Connecting the equipments to earth busbar including S & F. 8 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.Earth wire should be connected earth pit to all bushbar and earth bus bar to VTPN, HTPN, SPN MCB DB etc.
6
-
1502.52
Supply of 240 volt, 20 watt single LED tube light fittings (Cat. No – Frame – Crompton ECO – model – DIJB12L-T8-20, Tube – Crompton – Secure - model – LTT8-20 or equivalent Havells, Philips).
29
-
1306.53
Supply of 240 volt, 20 watt LED surface mounted light fittings (Cat no – Crompton Royal Rimlees – S – model – LSRP -20 CDL Or equivalent Havells, Philips).
27
-
1463.31
Supply of 240 volt, 10 watt LED ball lamp Cat no.- Havell's - LED ADORE 10 W-E27WW Ball LAMP.
2
-
182.94
MAIN PANEL - Febricating , supplying , installation, testing and commissioning of wall/ floor mounting industrial type L.T. Oanel board made with 40 x40 x6 mm. ms. angle and 40x6 mm. M.S. flat incl. fabricated with 16 swg. M.S. sheet box for accommodation of the following switches incl. making throughout joining between main switches and BBC and inter connection by suitable size of FR-PVC copper wire, fixing M.S. cable gland and socketing the ends with powder coated approved paint over a coat of R.O. primer as per direction of EIC . The panel board comprising with the following switches:-415 volt , 315A, 4 bar , copper Bus bar with dist. Ch..-1,415 volt, 320 A, Open execution type main switch S&F HRC fuse (L&T) with dist. Ch..-1,415 v, 320A, TPN on load Open execution type changeover(L&T) with dist. Ch-4,415 volt, 200 A, Open execution type main switch S&F HRC fuse (L&T) with dist. Ch-1,415 volt, 100 A, Open execution type main switch S&F HRC fuse (L&T)- with dist. Ch-4,415 volt, 63 A, Open execution type main switch S&F HRC fuse (L&T)-with dist. Ch-2,415 volt, 32 A, Open execution type main switch S&F HRC fuse (L&T) with dist. Ch-2,Ammeter & Selector switch (ISI)-1,Voltmeter & Selector switch (ISI)-1, Pilot lamp with sliding fuse (ISI)-3,Danger board ( 20x30 cm.) - ( Design of panel board will provide by the Department)-1.
1
-
210116.56
MAIN PANEL - Febricating , supplying , installation, testing and commissioning of wall/ floor mounting industrial type L.T. Oanel board made with 40 x40 x6 mm. ms. angle and 40x6 mm. M.S. flat incl. fabricated with 16 swg. M.S. sheet box for accommodation of the following switches incl. making throughout joining between main switches and BBC and inter connection by suitable size of FR-PVC copper wire, fixing M.S. cable gland and socketing the ends with powder coated approved paint over a coat of R.O. primer as per direction of EIC . The panel board comprising with the following switches:-415 volt , 200 A, 4 bar , copper Bus bar with dist. Charge.with dist. Ch-1, 415 volt, 200 A, Open execution type main switch S&F HRC fuse (L&T)- with dist. Ch. -1, 415 volt,160A, TPN on load Open execution type changeover(L&T) .with dist. Ch.-3,Ammeter & Selector switch (ISI)-1, Voltmeter & Selector switch (ISI)-1,Pilot lamp with sliding fuse (ISI)-3,Danger board ( 20x30 cm.) - ( Design of panel board will provide by the Department)-1.
1
-
77919.93
Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) in19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light /fan / ex-haust fan points with Modular type switch ( Legrand) fixed on Modular GI switch boaed with top cover plate flushed in wall incl. mending good damages to flushed in mending n good damages yo original finish. Total points -69 nos ( Ceiling fan - 15, Tube light - 18. , exhaust fan- 4, call bell- 2, surface square/round light fittings- 26 and Batten/angle holder - 04, and Projector - 1) . Average length- 8 mtr.
69
-
1298.22
Distribution wiring in 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) inin 19 mm bore, 3 mm thick polythene pipe complete with allaccessories embedded in wall to 240 V, 6A 3/5 pin plug point incl. S& F 240 V, 6A , 3/5 pin Modular type Socket & switch ( Legrand ) fixed on Modular GI switch boaed with top incl. earth continuity wire with Modular top cover plate flushed in wall incl. mending good damages to original finish. On board socket
7
-
301.39
S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) of the following sizes in the prelaid polythene pipe and by the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.a) 3x1.5 sq.mm for additional 6 Amp. Plug and SPN DB to Switch board
126
-
57.01
b) 2x 2.5 +1x1.5 Sq mm for Computer and power points,
200
-
77.2
c) 2x4 + 1x2.5 Sq. mm for AC and Geyser.
250
-
112.84
Fixing only single LED tube light fitting suspended 25 -30 cm bellow the ceiling with 2 No 20 mm dia EI condit (14 SWG) supports incl. S&F EI conduit,and complete with all accessories directly on ceiling through U type iron clamp and suitable size of MS fastene and S&F 3x1.5 sq mm flexibale copper wire of 1.5 mt .
18
-
254.18
Fixing of 240 volt, 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 3x1.5 sq.mm. flexible copper wire.
14
-
78.39
Fixing of 240 volt 300 exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:
4
-
390.77
Supply & Fixing of 300 mm (12") Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc.
4
-
229.24
S & F. 240V, 2 Modular socket type fan regulator (Step type) (Crabtree) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
15
-
459.66
S & F. MS fan clam of two piece type for RC ceiling fabricated from 40 mm x 9 mm MS flat incl. making good damages to building roof with satisfactory finishing and painting.
2
-
287.44
Fixing of 18 watt LED surface mounted light fittings on wall/ceiling by screws etc. .
28
-
66.51
Supply & Fixing angular batten holder (Anchor) ON PVC round block /round Bakelite on wall / ceiling.
4
-
45.13
Supplying and fixing 63 amp,8 way double door HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and painting for AC, SPNDB and Geyser.(Make- Legrand )
1
-
4981.47
Supplying and fixing 415 V 63 A, 4 pole MCB Isolator on din rail of existing DBs and necessary connection.( Legrand)
1
-
1003.66
S & F. 10-32 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB.
24
-
225.67
Supplying and fixing double-door (2+8) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand)
2
-
1754.32
S & F. 240 volt, 40 amp. MCB DP Isolator on din rail of existing DB and necessary connection ( Legrand).
2
-
414.53
S & F. 10-32 amp, 240V SP MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Havell’s). For SPN MCB DB.
16
-
225.67
Supply & fixing of 3 nos. 240 volt, 6 amp. Modular plug socket with 3 nos, 6 A modular switch Modular plug socket with switch in a single modular PVC/GI switch board (Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc. for TV.
2
-
1343.36
Supply & fixing of 2 nos. 240 volt, 6 amp. Modular plug socket with 2 nos, 6 A modular switch & 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC/GI switch board ( Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc. for computer.
4
-
1437.19
Supply & Fixing 240 V, 6/16 A, 3/5 pin Modular type plug socket (Legrand) with 16A Modular type switch, without plug top on GI Modular type switch board with top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. for power points.
7
-
541.62
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Legrand ) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
7
-
635.45
Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand) with 25A Modular switch type DP MCB ('C' Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc
8
-
931.2
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
250
-
77.2
Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire
200
-
93.83
Laying of following cables after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.a) 3.5 core 25 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from Existing panel to proposed HTPN DB.
30
-
150.85
b) 4 core 16 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN TO SPN MCB DB.
60
-
150.85
b) 2 core 16 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN TO SPN MCB DB.
20
-
150.85
S&F compression type gland complete for following XLPE/PVC armoured cables.3.5 core 25 Sq. mm
4
-
180.54
4 core 16 Sq. mm
6
-
156.78
2 core 16 Sq. mm
4
-
136.59
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.3.5 core 25 Sq. mm
4
-
130.65
4 core 16 Sq. mm
6
-
112.84
2 core 16 Sq. mm
4
-
68.89
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
1
-
256.56
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells).1.1 kv grade, 3.5 core ,25 sq mm XLPE/PVC armoured aluminium cable,
30
-
478.93
1.1 kv grade, 4 core ,16 sq mm XLPE/PVC armoured aluminium cable.
70
-
391.43
1.1 kv grade, 2 core ,16 sq mm XLPE/PVC armoured aluminium cable.
15
-
291.27
Supply of 230volt, 1200 mm sweep , AC ceiling Fan ( Orient - Summer King, SummerCool, Summer Breeze,)
15
-
3376.56
Supply of 230 volt, 300 mm. sweep, 80 Watt, 1420 rpm heavy duty exhaust Fan ( EPC, MARATHON) [Approved by PWD]
4
-
5073.43
Supply of 230 volt, 450 mm sweep Wall mounted Fan ( Orient Tornado- Wall -11)
1
-
5180.75
Connecting the equipments to earth busbar including S & F. 8 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.Earth wire should be connected earth pit to all bushbar and earth bus bar to VTPN, HTPN, SPN MCB DB etc.
2
-
1502.52
Supply of 240 volt, 20 watt single LED tube light fittings (Cat. No – Frame – Crompton ECO – model – DIJB12L-T8-20, Tube – Crompton – Secure - model – LTT8-20 or equivalent Havells, Philips).
18
-
1306.53
Supply of 240 volt, 20 watt LED surface mounted light fittings (Cat no – Crompton Royal Rimlees – S – model – LSRP -20 CDL Or equivalent Havells, Philips).
28
-
1463.31
Supply of 240 volt, 10 watt LED ball lamp Cat no.- Havell's - LED ADORE 10 W-E27WW Ball LAMP.
4
-
184.39
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed
150
-
11.31
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.
19.88
-
134.92
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.
3.98
-
87.71
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
22.1
-
487.9
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
151
-
364.25
Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation.
13.67
-
4898.1
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (a) Pakur Variety
27.65
-
5986.12
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation
78.68
-
231.9
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 mJSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL
0.81
-
67495.38
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements