Uttar Banga Krishi Viswavidyalaya Tender

Lab Table with under storage Overall size 2400 W X 750 D X 750 H (all in MM) Top made up of 18mm Black/White Granite polished, Storage should be below the table top ,Storage should be below the table top , Storage Shutter made up of 1 mm thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, Under structure:-Top should be connected with stiffener pipe bottom of the top made up of CRCA 50X25X1.4mm thick between each storages , under structure modesty panel made up of 0.8mm thick CRCA sheet duly powder coated , Vertical leg made up of CRCA 50X25X1.4mm , cover with 0.8mm thick CRCA sheet , complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns

Overhead Cabinets Overall Size 2400 W X 600 H X 450 D Overhead body made up of 0.8mm thick and shutter made up in 1mm thick CRCA sheet powder coated , shutter with 3 to 4mm thick glass, hanging on wall with the help of hole fasteners ,all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Under storage with shelves 1550 W X 338 D X 700 H Storage Shutter made thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Under storage with shelves 947 W X 338 D X 700 H Storage Shutter made thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Under storage with shelves 1188 W X 338 D X 700 H Storage Shutter made thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Under storage with shelves 1859 W X 338 D X 700 H Storage Shutter made thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Overhead Cabinets Overall Size 2700 W X 600 H X 450 D Overhead body made up of 0.8mm thick and shutter made up in 1mm thick CRCA sheet powder coated , shutter with 3 to 4mm thick glass, hanging on wall with the help of hole fasteners ,all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Lab Table with under storage Overall size 2400 W X 750 D X 750 H (all in MM) Top made up of 18mm Black/White Granite polished, Storage should be below the table top ,Storage should be below the table top , Storage Shutter made up of 1 mm thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, Under structure:-Top should be connected with stiffener pipe bottom of the top made up of CRCA 50X25X1.4mm thick between each storages , under structure modesty panel made up of 0.8mm thick CRCA sheet duly powder coated , Vertical leg made up of CRCA 50X25X1.4mm , cover with 0.8mm thick CRCA sheet , complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns

Under storage with shelves 2316 W X 338 D X 700 H Storage Shutter made thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Overhead Cabinets Overall Size 2400 W X 600 H X 450 D Overhead body made up of 0.8mm thick and shutter made up in 1mm thick CRCA sheet powder coated , shutter with 3 to 4mm thick glass, hanging on wall with the help of hole fasteners ,all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Lab Table with under storage in L Shape Overall size 940 W X 750 D X 750 H & 2040 W X 750 D X 750 H (all in MM) Top made up of 18mm Black/White Granite polished, Storage should be below the table top ,Storage should be below the table top , Storage Shutter made up of 1 mm thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, Under structure:-Top should be connected with stiffener pipe bottom of the top made up of CRCA 50X25X1.4mm thick between each storages , under structure modesty panel made up of 0.8mm thick CRCA sheet duly powder coated , Vertical leg made up of CRCA 50X25X1.4mm , cover with 0.8mm thick CRCA sheet , complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns

Under storage with shelves 1554 W X 338 D X 700 H Storage Shutter made thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Overhead Cabinets Overall Size 3000 W X 600 H X 450 D Overhead body made up of 0.8mm thick and shutter made up in 1mm thick CRCA sheet powder coated , shutter with 3 to 4mm thick glass, hanging on wall with the help of hole fasteners ,all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Under storage with shelves 1850 W X 338 D X 700 H Storage Shutter made thick CRCA and complete body will be in 0.8mm thick CRCA Sheet duly Powder Coated, complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns .

Lab Table Overall size 3680 W X 750 D X 750 H (all in MM) Top made up of 18mm Black/White Granite polished, Storage should be below the table top Under structure:-Top should be connected with stiffener pipe bottom of the top made up of CRCA 50X25X1.4mm thick between each storages , under structure modesty panel made up of 0.8mm thick CRCA sheet duly powder coated , Vertical leg made up of CRCA 50X25X1.4mm , cover with 0.8mm thick CRCA sheet , complete structure should be supply in knock-down condition , assembly should be done with suitable nut & bolt and required fastener , all welding should be used CO2 MIG welding to minimise rusting on welding area , complete structure should be free from all welding defects such as sharp edges , burr etc , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns

Laboratory Stool with low backrest Seat size shall be 400 mm diameter on 1.0 mm thick Mild Steel with 60 mm thick 40 density moulded PU foam, Covering material of cushion: leatherite, Back 35 rest height shall be 300 mm with 12 mm thick molded comm. ply with 50 mm thick 32 density molded PU foam covered with leatherite. The back rest shall be provided with lifting arrangement on flat iron & helical spring. The base stand should be made up of 4 prongs duly pressed welded together centrally with good quality and sturdy in four leg .The stand and other metal parts excluding central spindle shall be power coated complete steel structure shall be pre-treated and power coated with minimum thickness of 60 microns coating. A Central spindle of 25 mm dia rod without threads shall be provided with fixed arrangement.

Laboratory Stool without backrest Seat size shall be 400 mm diameter on 1.0 mm thick Mild Steel with 60 mm thick 40 density moulded PU foam, Covering material of cushion: leatherite, ply with 50 mm thick 32 density molded PU foam covered with leatherite. The base stand should be made up of 4 prongs duly pressed welded together centrally with good quality and sturdy in four leg .The stand and other metal parts excluding central spindle shall be power coated complete steel structure shall be pre-treated and power coated with minimum thickness of 60 microns coating. A Central spindle of 25 mm dia rod without threads shall be provided with fixed arrangement.