Uttar Banga Krishi Viswavidyalaya Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Uttar Banga Krishi Viswavidyalaya - UBKV Tender
Civil And Construction
Eprocure
Opening Date3 Oct 2024
Closing Date23 Oct 2024
Tender Amount₹ 2,44,40,963
Costs
EMD
₹ 4,88,819Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UBKV_760879_1Bid Award Id
ViewTender No
NIeT-10 of 2024-25Tender Authority
Uttar Banga Krishi Viswavidyalaya ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
72.98
31477
431.31
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
669.24
215495
322
(II) Cement concrete with 30 mm down graded shingles excluding shuttering.
N.B. Variety.In ground floor (a) 1:3:6 proportion
39.83
135143
3393
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(ii ) River Bazree
251.64
1209633
4807
b) First Floor
67.09
328875
4902
b) Second Floor
66.95
334549
4997
b) Third Floor
77.05
392338
5092
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (ii ) River Bazree
25.58
104085
4069
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation
436
89380
205
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work.i)Ground Floor
602.99
218885
363
ii)First Floor
587.11
223688
381
iii) Second Floor
587.11
234256
399
iv) Third Floor
666.63
277984
417
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL
25.16
1484907
59018.58
ii)First Floor
6.71
398899
59448.58
ii)Second Floor
6.7
401186
59878.58
iv)Third Floor
7.71
464979
60308.58
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.i) For roof truss works a) Span up to 12 Mtr
0.27
20056
74284
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:-a) With 0.5 mm thick sheet
24.64
22077
896
Aluminium sheet ridging fitted with self tapping screws,EPDM washers etc complete.(Minimum 225mm end lapping).(A) 300 mm lapping each way.(b) With 0.91 mm sheet.
20
9500
475
Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed.(iii) 25 mm dia.(c) 750 mm long
16
8128
508
250 mm thk. Brick work with 1st class bricks in cement mortar (6 : 1)- a) In Foundation & Plinth (GL.TO P.L)
22.5
110160
4896
Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor
8.16
41771
5119
First Floor,(a) Upto 4th floor
8.16
42676
5230
125 mm thick Autoclave aerated concrete block Work with size 625 mm x 250 mm x 125 mm- Grade-I,having drying Shrinkage less than 0.05% conforming to IS: 2185 ( Part-3)-1984 made up of fly ash (conforming to IS: 3812-1981,with permissible loss on ignition upto 6%), lime , cement and complete in all respect as per direction & satisfaction of Engineer -in Charge .a) laid in Cement Mortar (1:6) -In Super Structure, Ground Floor.
297.61
220231
740
First Floor,(a) Upto 4th floor
311.68
234383
752
Second Floor,(a) Upto 4th floor
300.88
229872
764
Third Floor,(a) Upto 4th floor
320.06
248366
776
Pre-Constructional Anti-termite Treatment: Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS-6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated).
500
68500
137
40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately) for underground water retaining structures.
18.33
5590
305
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar,(b) 20 mm thick plaster
362.08
58294
161
First Floor,(a) Upto 4th floor
321.62
53067
165
Second Floor,(a) Upto 4th floor
300.11
50718
169
Third Floor,(a) Upto 4th floor
443.19
76671
173
(i) With 1:6 cement mortar,(c) 15 mm thick plaster
465.32
65610
141
First Floor,(a) Upto 4th floor
476.79
69134
145
Second Floor,(a) Upto 4th floor
481.61
71759
149
Third Floor,(a) Upto 4th floor
561.5
85909
153
(ii) With 1:4 cement mortar,(c) 10 mm thick plaster
251.13
31642
126
First Floor,(a) Upto 4th floor
251.13
32646
130
Second Floor,(a) Upto 4th floor
251.13
33651
134
Third Floor,(a) Upto 4th floor
281.99
38914
138
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
160.89
5470
34
Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick).i)Ground Floor
716.45
87406
122
First Floor,(a) Upto 4th floor
727.92
89330
122.72
Second Floor,(a) Upto 4th floor
732.74
90449
123.44
Third Floor,(a) Upto 4th floor
843.49
104727
124.16
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer including cleaning and smoothning of surface.Two Coats.i)Ground Floor
716.45
50151
70
First Floor
727.92
50954
70
Second Floor
732.74
51291
70
third Floor
843.49
59044
70
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface toreceive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats,i)Ground Floor
362.08
16329
45.1
First Floor,(a) Upto 4th floor
321.62
14733
45.81
Second Floor,(a) Upto 4th floor
300.11
13961
46.52
Third Floor,(a) Upto 4th floor
443.19
20931
47.23
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) Premium 100% Acrylic Emulsion,i)Ground Floor
362.08
30414
84
First Floor,(a) Upto 4th floor
321.62
27244
84.71
Second Floor,(a) Upto 4th floor
300.11
25635
85.42
Third Floor,(a) Upto 4th floor
443.19
38171
86.13
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &fint mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(b) Area of each tile above 0.09 Sq.m.(b) Area of each tile above 0.09 Sq.m. B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
105.44
115773
1098
First Floor,(a) Upto 4th floor
99.54
109792
1103
Second Floor,(a) Upto 4th floor
55.67
61682
1108
Third Floor,(a) Upto 4th floor
55.67
61960
1113
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(A) Deep Colour & White.i)Ground Floor
303.96
513084
1688
First Floor,(a) Upto 4th floor
285.36
483114
1693
Second Floor,(a) Upto 4th floor
285.36
484541
1698
Third Floor,(a) Upto 4th floor
285.36
485968
1703
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg)thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours,curing and roughening of concrete surface complete.In ground floor.(a) Area of each Granite slab upto 0.60 Square meter.
48.49
103235
2129
First Floor,(a) Upto 4th floor
82.29
176182
2141
Second Floor,(a) Upto 4th floor
82.29
177170
2153
Third Floor,(a) Upto 4th floor
82.29
178157
2165
Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c )consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge.In ground floor.a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U-1520)
79.19
107460
1357
(B) Dressed wood work in post , plate , battens . etc. fitted & fixed complete(excluding the cost of bolts only, but including the cost of nails, screws etc.)(The quantum should be corrected upto three decimals).(ii) Sal : Local.
0.42
32200
76667
Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]In Ground Floor.(ii) 6mm
122.57
113132
923
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof.In ground floor.Glossy/Matt/Suede excluding surface texture or metallic lustre.(ii) Thickness of laminate 1 mm
350.69
241274
688
Providing and fixing of factory made uPVC Sliding window (White Colour)complete, (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided.Window frame will be fixed to the wall with 100mm long and 8mm dia.Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable).b) 3 Track 3 Sash window frame of size 122 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm
21.6
168026
7779
Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly reinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame,adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-in-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)a) Louver Window with provision of Exhaust Fan frame of size 67 x 62 mm & Sash / Mullion of size 67 x 78 mm both having wall thickness of 2.3 ± 0.2 mm
14.93
106734
7149
First Floor,(a) Upto 4th floor
14.93
106734
7149
Second Floor,(a) Upto 4th floor
14.93
106734
7149
Third Floor,(a) Upto 4th floor
14.93
106734
7149
Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass..
26.08
12205
468
First Floor,(a) Upto 4th floor
26.08
12205
468
Second Floor,(a) Upto 4th floor
26.08
12205
468
Third Floor,(a) Upto 4th floor
26.08
12205
468
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white.) a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm
393.26
153764
391
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP). (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)
42.92
85453
1991
Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming to IS: 1868-1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in-charge. ( Payment will be made on finished length of the work).15 micron colour anodising Structural glazing /Curtain Wall.i) Mulion & Transom (Weight @1.819 Kg per Meter)
76
35188
463
ii) Sub frame for fixing Glass (Weight @0.31 Kg per Meter)
76
6156
81
Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub-frame as per direction of Engineer-in-charge for Structural Glazing/Curtain wall etc.Glazing Silicon for fixing Glass on Sub frame
76
8512
112
Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge.for Structural Glazing/Curtain wall.Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work
76
4332
57
Supplying profiles of required sections made of aluminium alloy extrusion confirming to IS 732-1983 and IS 1285-1975 anodised with required film thickness and specified colour / natural mat finished conforming to IS 1868-1983 for fabrication of structural glazing, curtain wall formed of basic section of any ISI embossed / certified make and brand as per direction of Engineer-in-Charge. (Payement will be made on finished length of the work). for Structural glazing / curtain wall with 15 micron Coloured Anodising.(i) Fixing Plate (Wt. @ 0.515 Kg per Mtr.)
76
8816
116
(ii) Fixing cap (Wt. @ 0.342 Kg per Mtr.)
76
5852
77
Labour charge for fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:-Structural Glazing made of extruded and annodized alloy aluminium sections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener bolt, mullion bolt, nuts & washers,maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissue paper foam (used as filler between sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing,specification and direction of Engineer-in-Charge. (The rate includes hire charges of all tools and plants, including all incidental charges, adhesieve, joiners such as screw,cleate angle,etc. but excluded the cost of extruded aluminium sections, glass, glazed silicon, weather silicon etc.)
15
12750
850
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;(B) coloured, toughened glass conforming to IS: 2553-1992 (part-II) (i) 6mm thick
15
16095
1073
Wood work in door and window frame fitted and fixed inposition complete including a protective coat of painting atthe contact surface of the frame exluding cost of concrete,Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Siliguri.
0.4
32692
81936
First Floor
0.32
26283
82136
Second Floor
0.32
26347
82336
Third Floor
0.32
26411
82536
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.(a) 35 mm thick shutters (single leaf)
22.05
58630
2659
First Floor
17.64
47151
2673
Second Floor
17.64
47398
2687
Third Floor
17.64
47645
2701
Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width x 32 mm thickness (the door frame is to be made with single piece extruded solid pvc profile whereas no sheet pasted profile shall be applied for door frame fabrication) and shall be fixed to wall as per instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws.
15
7245
483
First Floor
15
7245
483
Second Floor
5
2415
483
Third Floor
5
2415
483
Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge. a) Factory made Single piece non decorative extruded PVC profiles door shutter(mat / plain finish)
13.44
31557
2348
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm Length
168
4872
29
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:(v) 100 x 63 x 3.2mm.
168
12096
72
(i) Door stopper.(Brass)
34
3978
117
(c) Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete.
34
64566
1899
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(v) 150mm long x 12mm dia. bolt.
68
5984
88
Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges.
4
6284
1571
ii) Godrej Hydraulic door closer fitted and fixed complete.
(a) Heavy type
34
70176
2064
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(ii) Grill weighing above 16 Kg./sq.mtr and above
7.27
71442
9827
First Floor
7.27
72156
9925.27
Second Floor
7.27
72871
10023.54
Third Floor
7.27
73585
10121.81
(b) Extra for work in grill gate.(I) For hanging and locking arrangements including supply ofmaterials and labour complete.(15% extra over the corresponding item of grill )
0.12
1179
9827
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.
4.73
6243
1320
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)
40
363080
9077
a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
307.39
8914
29
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)
307.39
22132
72
R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars),shuttering etc. and 10 mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete.In First floor (a) Upto 4th floor(a) 50 mm.Thick panels.II. JSW/JSPL/SHYAM/SRMB/BMASL/ ELECROSTEEL/ SSL
40.2
48923
1217
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed
368.19
3681
10
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.
165.69
19761
119.27
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.
33.14
2569
77.54
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
51.85
22363
431.31
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
345.69
111312
322
(II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety.In ground floor (a) 1:3:6 proportion
25.93
87980
3393
250 mm thk. Brick work with 1st class bricks in cement mortar (6 : 1)- a) In Foundation & Plinth
8.65
42350
4896
125 mm. thick brick work with 1st class bricks in cement mortar (4 : 1)i)Ground Floor
28.83
19431
674
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (ii ) River Bazree
51.85
210977
4069
Supplying and laying true to line and level Tactile Finish Scratch resistant,Neutral to UV rays, Non-fade, High Slip Resistant Full Body Vitrified Tiles conforming to IS:15622-2006 & IS :4457- 2007 and tested in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness 7.0, Staining resistance: Class-1, Water Absorption E 0.5%], MOR 38N/sq.mm & Breaking strength 4000 N for Outdoor area of building e. g.Driveway, Pathway, Pavements, Parking lots, Sloping ramps, Entrance lobbies,Patios, Portico, swimming pool enclosure, Bus Passenger Shed & directing visually impaired persons, set over necessary underlay and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles and removal of wax coating of top surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including the cost of materials, labour and all other incidental charges complete including backside slurry but excluding the cost of underlay and true to the manufacturer's specification and direction of Engineer-in-Charge.In Ground Floor: Sizes-300 mm x 300 mm x15 mm
379.44
670849
1768
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar,(b) 20 mm thick plaster
34.61
5572
161
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
34.61
1176
34
Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No. S10221114-P Trap (CRUSE SET) of CERA or equivalent.)
7
38122
5446
Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.)
7
16842
2406
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(v) 900 mm long
7
1029
147
Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.) White
7
9093
1299
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one C.P. pillar cock of approved make, C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(iii) 630 mm X 450 mm size
29
94540
3260
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
29
43413
1497
Supplying, fitting and fixing pillar cock of approved make.(g) CP Sink Cock with Regular Swinging Spout (Table Mounted Model) (Equivalent to Code No. 5357 of JAQUAR or similar brand).
29
29638
1022
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm.
29
17777
613
Supplying, fitting and fixing porcelain soap tray of approved make.
(i) Recessed soap tray of size 150 mm X 150 mm
29
9802
338
Supplying, fitting and fixing glass shelf with aluminium guard rails.
(a) Ordinary type with 5.5 mm sheet glass (ii) 600 mm X 125 mm
29
13920
480
Supplying, fitting and fixing Tooth brush and Tumbler holder of approved make of size 140 mm X 65 mm (porcelain).
29
10469
361
Supplying, fitting and fixing liquid soap container.(c) Fibre glass
29
5452
188
Supplying, fitting and fixing shower of approved brand and make.(b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
2
2824
1412
Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass (iii) 25 mm dia. and 750 mm long
7
3325
475
Supplying, fitting and fixing C.P. Wall Flange
19
1216
64
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(b) Sink with drain board 1050 mm X 450 mm X 180 mm
1
5006
5006
Supplying, fitting and fixing bib cock or stop cock.(d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand).
20
19060
953
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992.(A) (i) Single Socketed 3 Meter Length(b) 110 mm
300
87600
292
(B) Fittings(iii) Door Tee(b) 110 mm
84
16380
195
ix) Bend 45º(b) 110 mm
84
7476
89
x) Bend 87.5º(b) 110 mm
84
10080
120
xv) Vent Cowl (b) 110 mm
20
660
33
xvi) Pipe Clip(b) 110 mm
200
4200
21
(ii) Plain Tee(b) 110 mm
20
1700
85
v) Plain Y(b) 110 mm
20
4120
206
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.(A)Above ground(ii) 110 mm dia.
150
8550
57
(B)Under ground(ii) 110 mm dia.
150
12600
84
Supplying, fitting & fixing Aluminium domical grating.(i) 150 mm
12
888
74
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work 40 mm dia
275
80300
292
50 mm dia
250
96000
384
(b) For Concealed Work 20 mm dia
200
31600
158
25 mm dia
200
41000
205
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (Q) Ball Valve 25 mm dia
10
2390
239
40 mm dia
10
5530
553
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning,including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials (excluding the cost of master trap only).(ii) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 100 mm dia. of approved make.B) With Bazree (N.B Varity) (i) Tor steel/Mild Steel JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL
8
79472
9934
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(i) Tor steel/Mild Steel JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL
2
31118
15559
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe & Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(v) For 100 usersB) With Bazree (N.B Varity)(i) Tor steel/Mild Steel JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL
1
104262
104262
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(d) 2000 litre capacity
3
31302
10434
Labour for hoisting plastic water storage tank.(ii) Above 1500 litre upto 5000 litre capacity.a) Upto 1st story from G.L.
3
462
154
(b) Extra for each additional story
4
288
72
Labour for punching hole in plastic water storage tank upto 50 mm dia.
15
285
19
(d) Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).).
4
9560
2390
(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
7
8757
1251
f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
12
15228
1269
c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).
7
5999
857
CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand).
4
9832
2458
Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets.(a) Plain edge sink with overflow (ii) 610 mm X 450 mm X 250 mm
10
54450
5445
Supplying, fitting and fixing pillar cock of approved make.e) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No.5167(B) & Model - FLORENTINE of JAQUAR or similar brand).
10
24580
2458
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm
8
22952
2869
AMBULANT DISABLED TOILET
A Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No.S10221114-P Trap (CRUSE SET) of CERA or equivalent.)
1
5446
5446
Fittings of Ambulant Disabled Toilet Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.) White
1
2406
2406
Fittings of Ambulant Disabled Toilet Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.) White
1
1299
1299
Fittings of Ambulant Disabled Supplying, fitting and fixing Stainless steel Wall Mounted Grab Bar. Load bearing capacity 150 kg, covered by Nylon surface with contour finish (for better grip) with Anti-bacterial surface complete. (Model Code No.B2210106 of CERA or equivalent.)600mm Long
1
1825
1825
Fittings of Ambulant Disabled Supplying, fitting and fixing Stainless steel Wall Mounted Hinged hand rail (750X100 mm) covered by Nylon surface with contour finish (for better grip) with two brackets.(Model Code No.B2210108 of CERA or equivalent.) 750 mm long
1
6760
6760
Fittings of Ambulant Disabled Supplying, fitting and fixing 15 mm Twin Flush Fitting (Model Code No.B1810112 of CERA or equivalent).
1
1041
1041
Fittings of Ambulant Disabled Supplying, fitting and fixing 15 mm Spatula Single Lever Basin Mixer (Model Code No. F9030451 of CERA or equivalent).
1
1973
1973
Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete.(b) With lead caulked joints.
(i) 150 mm dia. (internal)
30
44070
1469
Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to LED surface mounted light /fan / ex-haust fan points with Modular type switch ( Legrand) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages .Total points -82 nos ( i) Ceiling fan - 14 nos, ii) Exhaust fan - 5 nos, iii) LED surface light fittings- 62 nos , iv) Call bell- 1 no. Average length- 8mtr.
82
98564
1202
Distribution wiring in 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V, 6A 3/5 pin plug point incl. S& F 240 V, 6A , 3/5 pin Modular type Socket & switch ( Legrand ) fixed on Modular GI switch board incl. earth continuity wire with Modular top cover plate flushed in wall incl. mending good damages to original finish. On board socket.
10
2376
237.6
Fixing of 18/22 watt LED surface mounted light fittings on wall/ceiling by screws etc. .
60
3696
61.6
Fixing of 240 volt 300 exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust.
5
1809
361.9
Supply & Fixing of 300 mm (12") Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc.
5
1061
212.3
S & F. 240V, 2 Modular socket type fan regulator (Step type) (Crabtree) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
14
5959
425.7
S & F. MS fan clam of two piece type for RC ceiling fabricated from 40 mm x 9 mm MS flat incl. making good damages to building roof with satisfactory finishing and painting.
14
3726
266.2
Supply & Fixing 240 V, 2x6 A, 3 pin Modular type plug socket (Havells/ Cabtree) with 6A Modular type switch, without plug top on GI / PVC Modular type switch board with Modular top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
2
1658
829.4
Supply & Fixing 240 V, 6/16 A, 3/5 pin Modular type plug socket (Legrand) with 16A Modular type switch, without plug top on GI Modular type switch board with top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
2
1003
501.6
Supply & fixing of 2 nos. 240 volt, 6 amp. Modular plug socket with 2 nos, 6 A modular switch & 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC/GI switch board ( Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc. for computer.
5
6655
1331
Supplying and fixing double door 8 way Vertical TPN MCB DB for 415 volt, 160amp. MCCB enclosure incomer with IP-42/43 protection, embeded on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand).
1
11751
11751.3
Supplying and fixing 415 V, 160 amp, Four Pole MCCB of Breaking capacity 25kA /35kA with fixed thermal and fixed magnetic / adjus- table thermal and fixed magnetic setting in exis ting DBs / enclosure and necessary connection (Legrand).
1
10734
10734.9
Supplying and fixing 415 V, 63 A, TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary con nection (Legrand).
8
12601
1575.2
Supplying and fixing 63 amp,6 way double door HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and painting for AC, SPNDB,single phase power point and Geyser.(Make- Legrand )
2
7708
3854.4
Supplying and fixing 415 V 63 A, 4 pole MCB on din rail of existing DBs and necessary connection.( Legrand)
2
4026
2013
S & F. 10-32 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
36
7524
209
Supplying and fixing double-door (2+8) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand)
2
3249
1624.7
S & F. 240 volt, 40 amp. DP MCB on din rail of existing DB and necessary connection ( Legrand).
2
2063
1031.8
S & F. 10-16 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
16
3344
209
S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s,RRcable) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required
.a) 3x1.5 sq.mm for Switch board , 6 amp plug socketand out door light .
200
10560
52.8
b) 2x 2.5 +1x1.5 Sq mm Geyser and power point
120
8580
71.5
c) 2x 4.0 +1x2.5 Sq mm for A.C. point
150
15675
104.5
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Legrand ) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
5
2942
588.5
Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand) with 25A Modular switch type DP MCB ('C' Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc
5
4312
862.4
Laying of following cables after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.a) 3.5 core 25 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
40
5588
139.7
b) 2 core 16sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN DB to SPN MCB DB.
30
4191
139.7
c) 3.5 core 50 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN DB to SPN MCB DB.
20
3498
174.9
S&F of 3.5 core 50 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
2
334
167.2
S&F of 3.5 core 25 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
S&F of 4 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
S&F of 2 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
Finishing the end of 3.5 core 50 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
2
459
229.9
Finishing the end of 3.5 core 25 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
484
121
Finishing the end of 4 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
418
104.5
Finishing the end of 2 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
2
127
63.8
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
4
950
237.6
Supplying & fixing of 50 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.
10
3630
363
Supply and fixing 240 volt AC/DC superior type multitune (min 10 nos tune) Call bell (Anchor or equivalent) with selector switch for single/Multi Tunes mode Batter operated on HW/PVC/ Bakelite board including S&F board and battery as required.
1
323
323
Supplying and fixing 2 way 240 volt MCB SS enclosure with IP-20/30 protection, powder coated MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. Make- Legrand.
1
297
297
S & F. 240 volt, 20 amp. MCB DP Isolator on din rail of existing DB and necessary connection ( Legrand). For out door light fittings
1
600
600.6
Earthing with 80 mm dia. ISI medium GI pipe( TATA MEDIUM) x 3.64 mm thick x 6.08 mts. long and 1 no 65 mm x 6 mm x 8 mm galvanized ( hot Dip) steel dtrip ( 4 mtr long) 20 mm dia x 125 mm long galvanized bolt, double nut bolt s double washers including finishing both ends by making holes etc and supply and 80 mm dia GI pipe protection ( 6 mtr long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 7.3 mtr. ***Earth resistance should be below 1 ohm.
2
11767
5883.9
Supply and fixing 19 mm polythene pipe with fittings as necy for CCTV .
200
7920
39.6
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
150
10725
71.5
Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.
200
17380
86.9
Connecting the equipments to earth busbar including S &F of 25 x 6 mm copper strip on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
25
27312
1092.5
Connecting the equipments to earth busbar including S & F. 8 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.Earth wire should be connected earth pit to all bushbar and earth bus bar to HTPN MCB DB & SPN MCB DB .
10
10925
1092.5
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,50 sq mm XLPE/PVC armoured aluminium cable,
20
7942
397.12
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,25 sq mm XLPE/PVC armoured aluminium cable,
40
9598
239.95
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 2 core ,16 sq mm XLPE/PVC armoured aluminium cable,
30
4278
142.63
Supply and fixing of 25 x 8 x 35 mm brass nut bolts with double brass washer.
12
402
33.56
Supply of 240 volt, 22 watt LED surface mounted light fittings ( Make- Sturlite, S-FIT Model- LG-0029-22W) OR equivalent Philips, Havells.
57
57147
1002.59
Supply and fixing of 1.1 kv gr. 2 core 0.50 sq mm multistrand annealed bare copper conductor, PVC Insulated Industrial Speaker wires.
110
1881
17.1
Supply of 230volt, 1200 mm sweep , AC ceiling Fan ( Orient - Summer King, SummerCool, Summer Breeze,)
14
36294
2592.46
Supply of 230 volt, 300 mm. sweep, 80 Watt, 1420 rpm heavy duty exhaust Fan ( EPC, MARATHON) .
5
21813
4362.72
MAIN PANEL - Febricating , supplying , installation, testing and commissioning of wall/ floor mounting cubical type L.T. panel board made with 40 x40 x6 mm. ms. angle and 40x6 mm. M.S. flat incl. fabricated with 16 swg. M.S. sheet box for accommodation of the following switches incl. making throughout joining between main switches and BBC and inter connection by suitable size of FR-PVC copper wire, fixing M.S. cable gland and socketing the ends with powder coated approved paint over a coat of R.O. primer as per direction of EIC . The panel board comprising with the following switches:- 415 volt , 315A 4 bar , copper Bus bar [4x(40x5mm)] 4 MT, 415 volt, 315A, TPN, Open execution type main switch incl S&F HRC fuse (L&T) ., 415 volt, 160 A, TPN, Open execution type main switch incl.S&F HRC fuse (L&T)-. 415 volt, 315 amp DIN type fuse link . (L&T)- .415 volt, 160 amp DIN type fuse link . (L&T)- ., Ammeter & Selector switch (ISI) - Voltmeter & Selector switch (ISI) -, Pilot lamp with sliding fuse (ISI) - , Danger board ( 20x30 cm.) -
1
212485
212485.28
Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to LED surface mounted light /fan / ex-haust fan points with Modular type switch ( Legrand) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages .Total points -66 nos ( i) Ceiling fan - 14 nos, ii) Exhaust fan - 2 nos& iii) LED surface light fittings- 45 nos. Average length- 8mtr.
61
73340
1202.3
Distribution wiring in 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V, 6A 3/5 pin plug point incl. S& F 240 V, 6A , 3/5 pin Modular type Socket & switch ( Legrand ) fixed on Modular GI switch board incl. earth continuity wire with Modular top cover plate flushed in wall incl. mending good damages to original finish. On board socket.
10
2376
237.6
Fixing of 18/22 watt LED surface mounted light fittings on wall/ceiling by screws etc. .
45
2772
61.6
Fixing of 240 volt 300 exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust.
2
723
361.9
Supply & Fixing of 300 mm (12") Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc.
2
424
212.3
S & F. 240V, 2 Modular socket type fan regulator (Step type) (Legrand ) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
14
5959
425.7
S & F. MS fan clam of two piece type for RC ceiling fabricated from 40 mm x 9 mm MS flat incl. making good damages to building roof with satisfactory finishing and painting.
14
3726
266.2
Supply & Fixing 240 V, 2x6 A, 3 pin Modular type plug socket (Havells/ Cabtree) with 6A Modular type switch, without plug top on GI / PVC Modular type switch board with Modular top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
2
1658
829.4
Supply & Fixing 240 V, 6/16 A, 3/5 pin Modular type plug socket (Legrand) with 16A Modular type switch, without plug top on GI Modular type switch board with top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
12
6019
501.6
Supply & fixing of 2 nos. 240 volt, 6 amp. Modular plug socket with 2 nos, 6 A modular switch & 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC/GI switch board ( Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc.
4
5324
1331
Supplying and fixing double door 8 way Vertical TPN MCB DB for 415 volt, 160amp. MCCB enclosure incomer with IP-42/43 protection, embeded on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand).
1
11751
11751.3
Supplying and fixing 415 V, 160 amp, Four Pole MCCB of Breaking capacity 25kA /35kA with fixed thermal and fixed magnetic / adjus- table thermal and fixed magnetic setting in exis ting DBs / enclosure and necessary connection (Legrand).
1
10734
10734.9
Supplying and fixing 415 V, 63 A, TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary con nection (Legrand).
8
12601
1575.2
Supplying and fixing 63 amp,6 way double door HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and painting for AC, SPNDB,single phase power point and Geyser.(Make- Legrand )
2
7708
3854.4
Supplying and fixing 415 V 63 A, 4 pole MCB on din rail of existing DBs and necessary connection.( Legrand)
2
4026
2013
S & F. 10-32 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
36
7524
209
Supplying and fixing double-door (2+8) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand)
4
6498
1624.7
S & F. 240 volt, 40 amp. DP MCB on din rail of existing DB and necessary connection ( Legrand).
4
4127
1031.8
S & F. 10-16 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
32
6688
209
S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s,RRcable) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required
.a) 3x1.5 sq.mm for Switch board , 6 amp plug socketand out door light .
250
13200
52.8
b) 2x 2.5 +1x1.5 Sq mm Geyser and power point
300
21450
71.5
c) 2x 4.0 +1x2.5 Sq mm for A.C. point
150
15675
104.5
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Legrand ) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
5
2942
588.5
Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand) with 25A Modular switch type DP MCB ('C' Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc
5
4312
862.4
Laying of following cables after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.a) 3.5 core 25 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
40
5588
139.7
b) 4 core 16sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN DB to SPN MCB DB.
50
6985
139.7
c) 2 core 16sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN DB to SPN MCB DB.
30
4191
139.7
d) 3.5 core 50 sqmm at an average depth of 75 mm in floor/pavement/wall etc.from HTPN DB to SPN MCB DB.
25
4372
174.9
S&F of 3.5 core 50 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
2
334
167.2
S&F of 3.5 core 25 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
S&F of 2 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
8
1337
167.2
S&F of 4 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
Finishing the end of 3.5 core 50 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
2
459
229.9
Finishing the end of 3.5 core 25 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
484
121
Finishing the end of 4 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
418
104.5
Finishing the end of 2 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
8
510
63.8
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
4
950
237.6
Supplying and fixing 4 way 240 volt MCB SS enclosure with IP-20/30 protection, powder coated MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. Make- Legrand.
2
695
347.6
S & F. 415 volt, 20/32 amp. MCB FP MCB on din rail of existing DB and necessary connection ( Legrand). For out door light fittings
2
2631
1315.6
Supply and fixing 19 mm polythene pipe with fittings as necy for CCTV .
250
9900
39.6
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
150
10725
71.5
Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.
200
17380
86.9
Connecting the equipments to earth busbar including S & F. 8 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.Earth wire should be connected earth pit to all bushbar and earth bus bar to HTPN MCB DB & SPN MCB DB .
10
10925
1092.5
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,50 sq mm XLPE/PVC armoured aluminium cable,
25
9928
397.12
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,25 sq mm XLPE/PVC armoured aluminium cable,
40
9598
239.95
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 4 core ,16 sq mm XLPE/PVC armoured aluminium cable,
50
10403
208.07
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 2 core ,16 sq mm XLPE/PVC armoured aluminium cable,
30
4278
142.63
Supply of 240 volt, 22 watt LED surface mounted light fittings ( Make- Sturlite, S-FIT Model- LG-0029-22W) OR equivalent Philips, Havells.
45
45116
1002.59
Supply of 230volt, 1200 mm sweep , AC ceiling Fan ( Orient - Summer King, SummerCool, Summer Breeze,)
14
36294
2592.46
Supply of 230 volt, 300 mm. sweep, 80 Watt, 1420 rpm heavy duty exhaust Fan ( EPC, MARATHON) [Approved by PWD]
2
8725
4362.72
Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to LED surface mounted light /fan / ex-haust fan points with Modular type switch ( Legrand) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages .Total points -61 nos ( i) Ceiling fan - 14 nos, ii) Exhaust fan - 2 nos& iii) LED surface light fittings- 40 nos. Average length- 8mtr.
56
67328
1202.3
Distribution wiring in 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V, 6A 3/5 pin plug point incl. S& F 240 V, 6A , 3/5 pin Modular type Socket & switch ( Legrand ) fixed on Modular GI switch board incl. earth continuity wire with Modular top cover plate flushed in wall incl. mending good damages to original finish. On board socket.
10
2376
237.6
Fixing of 18/22 watt LED surface mounted light fittings on wall/ceiling by screws etc. .
40
2464
61.6
Fixing of 240 volt 300 exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust.
2
723
361.9
Supply & Fixing of 300 mm (12") Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc.
2
424
212.3
S & F. 240V, 2 Modular socket type fan regulator (Step type) (Legrand) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
14
5959
425.7
S & F. MS fan clam of two piece type for RC ceiling fabricated from 40 mm x 9 mm MS flat incl. making good damages to building roof with satisfactory finishing and painting.
14
3726
266.2
Supply & Fixing 240 V, 2x6 A, 3 pin Modular type plug socket (Havells/ Cabtree) with 6A Modular type switch, without plug top on GI / PVC Modular type switch board with Modular top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
2
1658
829.4
Supply & Fixing 240 V, 6/16 A, 3/5 pin Modular type plug socket (Legrand) with 16A Modular type switch, without plug top on GI Modular type switch board with top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
15
7524
501.6
Supply & fixing of 2 nos. 240 volt, 6 amp. Modular plug socket with 2 nos, 6 A modular switch & 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC/GI switch board ( Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc. for computer.
5
6655
1331
Supplying and fixing double door 8 way Vertical TPN MCB DB for 415 volt, 160amp. MCCB enclosure incomer with IP-42/43 protection, embeded on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand).
1
11751
11751.3
Supplying and fixing 415 V, 160 amp, Four Pole MCCB of Breaking capacity 25kA /35kA with fixed thermal and fixed magnetic / adjus- table thermal and fixed magnetic setting in exis ting DBs / enclosure and necessary connection (Legrand).
1
10734
10734.9
Supplying and fixing 415 V, 63 A, TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary con nection (Legrand).
8
12601
1575.2
Supplying and fixing 63 amp,6 way double door HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and painting for AC, SPNDB,single phase power point and Geyser.(Make- Legrand )
2
7708
3854.4
Supplying and fixing 415 V 63 A, 4 pole MCB on din rail of existing DBs and necessary connection.( Legrand)
2
4026
2013
S & F. 10-32 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
36
7524
209
Supplying and fixing double-door (2+8) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand)
4
6498
1624.7
S & F. 240 volt, 40 amp. DP MCB on din rail of existing DB and necessary connection ( Legrand).
4
4127
1031.8
S & F. 10-16 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
32
6688
209
S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s,RRcable) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required
.a) 3x1.5 sq.mm .
200
10560
52.8
b) 2x 2.5 +1x1.5 Sq mm.
300
21450
71.5
c) 2x 4.0 +1x2.5 Sq mm.
150
15675
104.5
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Legrand ) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
5
2942
588.5
Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand) with 25A Modular switch type DP MCB ('C' Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc
5
4312
862.4
Laying of following cables after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.a) 3.5 core 25 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
40
5588
139.7
b) 4 core 16sqmm at an average depth of 75 mm in floor/pavement/wall etc.
50
6985
139.7
c) 2 core 16sqmm at an average depth of 75 mm in floor/pavement/wall etc.
30
4191
139.7
d) 3.5 core 50 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
30
5247
174.9
S&F of 3.5 core 50 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
2
334
167.2
S&F of 3.5 core 25 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
S&F of 2 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
8
1337
167.2
S&F of 4 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
Finishing the end of 3.5 core 50 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
2
459
229.9
Finishing the end of 3.5 core 25 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
484
121
Finishing the end of 4 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
418
104.5
Finishing the end of 2 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
8
510
63.8
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
4
950
237.6
Supplying and fixing 4 way 240 volt MCB SS enclosure with IP-20/30 protection, powder coated MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. Make- Legrand.
2
695
347.6
S & F. 415 volt, 20/32 amp. MCB FP MCB on din rail of existing DB and necessary connection ( Legrand).
2
2631
1315.6
Supply and fixing 19 mm polythene pipe with fittings as necy for CCTV .
200
7920
39.6
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
150
10725
71.5
Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.
200
17380
86.9
Connecting the equipments to earth busbar including S & F. 8 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.Earth wire should be connected earth pit to all bushbar and earth bus bar to HTPN MCB DB & SPN MCB DB .
10
10925
1092.5
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,50 sq mm XLPE/PVC armoured aluminium cable,
30
11913
397.12
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,25 sq mm XLPE/PVC armoured aluminium cable,
40
9598
239.95
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 4 core ,16 sq mm XLPE/PVC armoured aluminium cable,
50
10403
208.07
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 2 core ,16 sq mm XLPE/PVC armoured aluminium cable,
30
4278
142.63
Supply of 240 volt, 22 watt LED surface mounted light fittings ( Make- Sturlite, S-FIT Model- LG-0029-22W) OR equivalent Philips, Havells.
40
40103
1002.59
Supply of 230volt, 1200 mm sweep , AC ceiling Fan ( Orient - Summer King, SummerCool, Summer Breeze,)
14
36294
2592.46
Supply of 230 volt, 300 mm. sweep, 80 Watt, 1420 rpm heavy duty exhaust Fan ( EPC, MARATHON) [Approved by PWD]
2
8725
4362.72
Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to LED surface mounted light /fan / ex-haust fan points with Modular type switch ( Legrand) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages .Total points -61 nos ( i) Ceiling fan - 14 nos, ii) Exhaust fan - 2 nos& iii) LED surface light fittings- 40 nos. Average length- 8mtr.
62
74542
1202.3
Distribution wiring in 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, RR cable ) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V, 6A 3/5 pin plug point incl. S& F 240 V, 6A , 3/5 pin Modular type Socket & switch ( Legrand ) fixed on Modular GI switch board incl. earth continuity wire with Modular top cover plate flushed in wall incl. mending good damages to original finish. On board socket.
10
2376
237.6
Fixing of 18/22 watt LED surface mounted light fittings on wall/ceiling by screws etc. .
52
3203
61.6
Fixing of 240 volt 300 exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust.
2
723
361.9
Supply & Fixing of 300 mm (12") Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc.
2
424
212.3
S & F. 240V, 2 Modular socket type fan regulator (Step type) (Legrand) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
15
6385
425.7
S & F. MS fan clam of two piece type for RC ceiling fabricated from 40 mm x 9 mm MS flat incl. making good damages to building roof with satisfactory finishing and painting.
15
3993
266.2
Supply & Fixing 240 V, 2x6 A, 3 pin Modular type plug socket (Havells/ Cabtree) with 6A Modular type switch, without plug top on GI / PVC Modular type switch board with Modular top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
2
1658
829.4
Supply & Fixing 240 V, 6/16 A, 3/5 pin Modular type plug socket (Legrand) with 16A Modular type switch, without plug top on GI Modular type switch board with top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
7
3511
501.6
Supply & fixing of 2 nos. 240 volt, 6 amp. Modular plug socket with 2 nos, 6 A modular switch & 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC/GI switch board ( Legrand) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc. for computer.
10
13310
1331
Supplying and fixing double door 8 way Vertical TPN MCB DB for 415 volt, 160amp. MCCB enclosure incomer with IP-42/43 protection, embeded on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand).
1
11751
11751.3
Supplying and fixing 415 V, 160 amp, Four Pole MCCB of Breaking capacity 25kA /35kA with fixed thermal and fixed magnetic / adjus- table thermal and fixed magnetic setting in exis ting DBs / enclosure and necessary connection (Legrand).
1
10734
10734.9
Supplying and fixing 415 V, 63 A, TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary con nection (Legrand).
8
12601
1575.2
Supplying and fixing 63 amp,6 way double door HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and painting for AC, SPNDB,single phase power point and Geyser.(Make- Legrand )
2
7708
3854.4
Supplying and fixing 415 V 63 A, 4 pole MCB on din rail of existing DBs and necessary connection.( Legrand)
2
4026
2013
S & F. 10-32 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
36
7524
209
Supplying and fixing double-door (2+8) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand)
4
6498
1624.7
S & F. 240 volt, 40 amp. DP MCB on din rail of existing DB and necessary connection ( Legrand).
4
4127
1031.8
S & F. 10-16 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB & DB and necy. connection (Legrand). For HTPN MCB DB. & SPN MCB DB
32
6688
209
S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s,RRcable) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required
.a) 3x1.5 sq.mm .
200
10560
52.8
b) 2x 2.5 +1x1.5 Sq mm.
300
21450
71.5
c) 2x 4.0 +1x2.5 Sq mm.
150
15675
104.5
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Legrand ) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
5
2942
588.5
Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand) with 25A Modular switch type DP MCB ('C' Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc
5
4312
862.4
Laying of following cables after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.a) 3.5 core 25 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
40
5588
139.7
b) 4 core 16sqmm at an average depth of 75 mm in floor/pavement/wall etc.
50
6985
139.7
c) 2 core 16sqmm at an average depth of 75 mm in floor/pavement/wall etc.
30
4191
139.7
d) 3.5 core 50 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
35
6121
174.9
S&F of 3.5 core 50 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
2
334
167.2
S&F of 3.5 core 25 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
S&F of 2 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
8
1337
167.2
S&F of 4 core 16 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
668
167.2
Finishing the end of 3.5 core 50 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
2
459
229.9
Finishing the end of 3.5 core 25 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
484
121
Finishing the end of 4 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
418
104.5
Finishing the end of 2 core 16 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
8
510
63.8
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
4
950
237.6
Supplying and fixing 4 way 240 volt MCB SS enclosure with IP-20/30 protection, powder coated MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. Make- Legrand.
2
695
347.6
S & F. 415 volt, 20/32 amp. MCB FP MCB on din rail of existing DB and necessary connection ( Legrand).
2
2631
1315.6
Supply and fixing 19 mm polythene pipe with fittings as necy for CCTV .
200
7920
39.6
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
150
10725
71.5
Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.
200
17380
86.9
Fixing outdoor type LED light fitting on wall including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 3x1.5 sq.mm cu PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from ceiling rose to the fitting, without control switch, incl. making connections and painting.
8
12320
1540
Connecting the equipments to earth busbar including S & F. 8 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.Earth wire should be connected earth pit to all bushbar and earth bus bar to HTPN MCB DB & SPN MCB DB .
10
10925
1092.5
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,50 sq mm XLPE/PVC armoured aluminium cable,
55
21841
397.12
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,25 sq mm XLPE/PVC armoured aluminium cable,
55
13197
239.95
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 4 core ,16 sq mm XLPE/PVC armoured aluminium cable,
50
10403
208.07
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 2 core ,16 sq mm XLPE/PVC armoured aluminium cable,
30
4278
142.63
Supply of 240 volt, 22 watt LED surface mounted light fittings ( Make- Sturlite, S-FIT Model- LG-0029-22W) OR equivalent Philips, Havells.
45
45116
1002.59
Supply of 230volt, 1200 mm sweep , AC ceiling Fan ( Orient - Summer King, SummerCool, Summer Breeze,)
15
38886
2592.46
Supply of 230 volt, 300 mm. sweep, 80 Watt, 1420 rpm heavy duty exhaust Fan ( EPC, MARATHON) [Approved by PWD]
2
8725
4362.72
Supply of 240 volt, 150 watt LED outdoor type light fittings Make- Sturlite Model- DYNAMIQ , LG-0071-150w, Lumens- 16500.
4
26763
6690.91
Laying of one No. cable 3.5 core 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick pro tection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
430
81356
189.2
Laying of one No. cable 3.5 core 150 sqmm in underground trench 460mm wide x 760mm average depth, with brick pro tection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
40
7568
189.2
S&F of 3.5 core 185 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
4
1733
433.4
S&F of 3.5 core 150 Sq. mm compression type gland complete for following XLPE/PVC armoured cables.
2
675
337.7
Finishing the end of 3.5 core 185 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4
2402
600.6
Finishing the end of 3.5 core 150 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
2
954
477.4
Earthing with 80 mm dia. ISI medium GI pipe( TATA MEDIUM) x 3.64 mm thick x 6.08 mts. long and 1 no 65 mm x 6 mm x 8 mm galvanized ( hot Dip) steel dtrip ( 4 mtr long) 20 mm dia x 125 mm long galvanized bolt, double nut bolt s double washers including finishing both ends by making holes etc and supply and 80 mm dia GI pipe protection ( 6 mtr long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 7.3 mtr. **Earth resistance should be below 1 ohm.
2
11767
5883.9
Sypply and fixing of 80 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing meterials as required.
20
11638
581.9
Supply and fixing of 415 volt 600 A, sheet metal (16 SWG) Iron Clad Busbar chamber on angle iron frame on existing feeder , including earth attachment and painting as required ,{Dimention of Cu. Bars- 4 x [2 x 40 x5]+Dimention of Sheeet metal box- [500 x 150 mm]}as required .
1
9445
9445.7
Connecting the equipments to earth busbar including S &F of 25 x 6 mm copper strip on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
40
43700
1092.5
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,185 sq mm XLPE/PVC armoured aluminium cable,
430
526474
1224.36
Supply of XLPE/ PVC Armoured Aluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,150 sq mm XLPE/PVC armoured aluminium cable,
40
38705
967.63
Feeder Pillar : Fabricating, supplying, installation , testing and commissioning of cubical type feeder pillar box made of 16 swg. m.s. sheet of suitable size for housing the following switchgears having double panel both side door opening with hinged door, gasket, locking arrangement with additional locking arrangement (2 nos, 7 lever lock), well ventilation arrangement incorporating with 50mm x50 mm x 6 mm angle iron frame work with 40 mm x 6 mm flat as intermediate members, powder coated painting with approved paint with horizontal cable end box, cable alay, coller, neck etc. incl. making throughout jointing between main switches and BBC, cable duct with 16 swg. m.s. sheet and inter connection by suitable size of copper wire/flat, fixing M.S. cable gland and socketing the ends and fixing.The feeder pillar on the brick foundation with plaster and neat cement finishing (below G.L. – 3” brick soling, 3” PCC, 1.5 ft brick work and above G.L.- 10” brick work, 3’0” to 4’0” height) incl. S & F. of the following switch gears as per G.S. and direction of EIC (the design of the feeder will be provided by the department). The feeder comprising with the following switches :- 415 volt , 315A 4 bar , copper Bus bar [4x(50x5mm)] 4 MT, 415 volt ,250 A, 4 bar , copper Bus bar [4x(40x5mm)] 4 MT, 415 volt, 400 A, TPN, Open execution type main switch incl S&F HRC fuse (L&T), 415 volt, 250 A, TPN, Open execution type main switch incl.S&F HRC fuse (L&T)-.415 volt, 200 A, TPN, Open execution type main switch incl.S&F HRC fuse (L&T)-. 415 volt, 160 A, TPN,
1
260622
260622.27
Add GST @18.00% from S.L. No- 01 to 417
1
3691370
3691370
Add Cess @1.00% from S.L. No- 01 to 418
1
241990
241990
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements