Urban Development Department Tender

3. Petal 3Str sofa:- Overall Size : Width : 189cm Depth : 82cm Height : 90cm Seating Height : 45cmseat:Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete under structure is made by gluing, nailing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3.Upholstery: Seat upholstery is made in polyester fabric with partitions. Backrest :Under structure: Under structure is made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm & 16x74mm without having major knots & defects on the surface. 3mm MDF is stapled on the back of the structure and manjarpat is stapled at the front bottom.Foam: Backrest is made of PU foam with density 28 kg/m3 on the front lumber portion and the shoulder area has supersoft PU foam with density 32 kg/m3. This is covered with a top layer of super soft PU foam with density 32 kg/m3. The top surface has foam with density 32 kg/m3. Complete back surface & underarm of backrest is glued with the PU foam with density 28 kg/m3. Upholstery: Backrest upholstery is made in polyester fabric and has a manjarpat cloth for pulling to accentuate the lumbar area. A throw cover is draped over the backrest, which can be dry cleaned. armrest: Under structure: Under structure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16x35mm without having major knots & defects on the surface. 2mm cardboard and 3mm MDF is stapled on the structure to provide a surface for sticking foam.Foam: Armrest is made of PU foam with density 28 kg/m3. Upholstery: Armrest upholstery is made in polyester fabric. Legs: Rubber wood [Grade-A] legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. Legs are coated with PU clear coat [matt finish].Assembly: Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of plastic legs. . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

4. Alice Pro coffee table:- Overall Size : Width : 100cm Depth : 65cm Height : 45cm TABLE LEGS METERIALS: Colour :cherry, TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm), L X W X T : 1000 x 650 x 10mm

5. Fitting and fixing of Roller Blinds 95% Black out Fabric (Imported) with accessories