University Of Calcutta Tender

Rendering the surface wall, ceiling with white cement based putty of approved make and brand.

Providing and fixing of false ceiling with powder coated exposed G.I grid suspension system ( E grid T 2430 or equivalent load carrying capacity ith mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c consisting of main runner 3600 mm long crosss tee 1200 mm / 600 mm long and wall angle. The wall angle shall be fixed on PVC dash fasteners on the perimetre of the wall by steel screws with distance 300 c/c . the main runners to be placed @ 1200 mm. The cross Tee 1200 will \be inserted in the pre cut slots of main runner at a regular interval of 600 mm to form a modular grid of 1200 mm x 600 mm. Additional cross tee of 600 will be placed perpendicular to the cross tee 1200 mm long to finally form a grid of 600 mm x 600 mm. Grid of module size 600 mm x 600 mm shall be supported by 6 mm dia. G.I wire form pulins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos Fibre cement standard Ceiling Board ( Density 1500 Kg/cum ) of size 595 mm x 595 mm conforming IS 14862 & BS 476 part 4,5,6,7 & 8 should be placed in Grid module to form a False ceiling. All complete as per drawing & direction of Engineer in charge. 4 mm thick Pearl Designer fibre cement board and E grid T- 2430/ 1510) area = 10X7.5+10X0.5X13 = 140 SQM.

Supplying & laying of approved brand of scratch proof, semi flesible P.V.C. blended homogeneous marble venyle flooring in tiles conforming to IS: 3462-1982 fixing with synthetic acrylic adhesive after preparing the floor , levellling & smothening when necessary with suitable putty , as per design and instruction of the EIC.

Applying interior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper / acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of EIC./ two coats / water based interior grade Acrylic primer.

Applying acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermidiate coats including putty. Two coats. Area: .

Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white.) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel above 0.90 / ( 2.7X2 + 10)3.4 x 5.0 kg/ sqm = 261.80

Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping) bothside laminated / 12 mm thick

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; (A) clear, toughened glass conforming to IS: 2553-1992 (part-II) 6 mm thick

Supplying of wooden laboratory table made of 19 mm thick block board, top side, cover, drawer, self etc. cover complete and shutter made of 19 mm ply, with reagent rack as per drawing and design of EIC. Including cost of all materials, fitting complete ( Table size 7'x4'x3' ht x2 = 56 sqm..)

Supplying of Instrument Table made of 19 mm ply top, side back cover with 6 mm ply, laminated with 1 mm thick lamination sheet including making of key board, CPU Rack, foot rest etc. size : 2.5 ' x 2.0' x2.5'(h)

Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.Area of each Granite slab above1.0 Square meter /

Supplying of working table made of 19 mm ply of ISI standard quality top finished with 1 mm thick lamination back side cover with 6 mm ply, front shutter with 19 mm ply, lamination, inside rack etc. complete as per drawing of EIC. Ht. of table 3', ( size : 10' x 22"x 2.5'(h) x5

Supplying, fitting and fixing PVC pipes of approved make of schedule 80 conforming to ASTMD -1785 and thread to match with GI pipes as per IS : 1239 (part - I ) with all necessary accessories.. Complete in all respect includingcost of all necessary fittings. a. 25 mm dia.

b. 15 mm dia.

Supplying, fitting & fixing of Peet's valve fully gun metal standard pattern best quality of approved brand bearing ISI mark with fittings./ 25 mm dia.

Supplying, fitting and fixing white vitreous china sink in position on CI brackets including two coats of painting of brackets./ size 610mmx 450mmx 250mm

Suplying, fitting and fixing of C.P stop cock/ bip cock of approved make and brand.

Supplying, fitting and fixing of C.P. pillar cock with 200 mm extended Lever Handle equivalent to code no.5031 & model Jaquqr or similar brand.

Supplying of Steel chair ( half back rest and fixed type)of Standard make and brand.

Supplying,fitting and fixing of wall cabinet made of ISI standard 19 mm thick ply in side, top & bottom cover, front shutter and inside self etc. , back covered with 6 mm ply of approved quality , side and top, front laminated with 1 mm thick of iSI standard lamination sheet and inside finished with polish including all cost of labour, materials, locking arrangement omplete.( size of cabinet 50'X2.5'X1.5'(D)

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: / 35 mm thick shutter/ single leaf

Anodised alminium tower bolt of approved quality manufacturer from extruded section conforming to IS 204/74 fittedand fixed with cadmiumplated screws./ 225mm longx 12 mm dia. Bolt.

Anodised alminium butt hings approved quality manufactured from extruded section conforming to IS 205/66 fitted and fixed with cadmiumplated screws./ 125x63x4.0mm

Anodised alminium D-type handle of approved quality manufactured from extruded section conforming to IS 230/72 fitted and fixed complete../ 150mmgripx12mm dia rod.

Supplying, fitting and fixing of roller blinds of approved quality.

Brass hasp bolt of approved quality fitted and fixed completewith 16 mm dia. Rod with centre bolt and round fitting. / 300 mm long

Hydraulic door closer of Godrej make fitted fixed complete.( Medium type)

Supplying,fitting and fixing of boiling water proof ply conforming to IS 710:1977 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design and approval of EIC ( excluding cost of supporting frame work and teak wood batten/ lipping) / a.(6 mm ply.

Supplying, fitting and fixing decorative lamination conforming toIS: 2046:1995 as per approved make andbrand finish and thickness with fitting, fixing the same on particle board/ ply with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of EIC./ 1.0 mm thickness /

Add GST @ 18 %