University Of Calcutta Tender

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary/ 20 mm thick .

Rendering the surface wall, ceiling with white cement based putty of approved make and brand.

Labour charges for chipping of the artificial stone floor before taking up the flooring works.

Providing and fixing of false ceiling with powder coatedexposed G.I grid suspension system ( E grid T 2430 or equivalent load carrying capacity ith mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c consisting of main runner 3600 mm long crosss tee 1200 mm / 600 mm long and wall angle. The wall angle shall be fixed on PVC dash fasteners on the perimetre of the wall by steel screws with distance 300 c/c . the main runners to be placed @ 1200 mm. The cross Tee 1200 will \be inserted in the pre cut slots of main runner at a regular interval of 600 mm to form a modular grid of 1200 mm x 600 mm. Additional cross tee of 600 will be placed perpendicular to the cross tee 1200 mm long to finally form a grid of 600 mm x 600 mm. Grid of module size 600 mm x 600 mm shall be supported by 6 mm dia. G.I wire form pulins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos Fibre cement standard Ceiling Board ( Density 1500 Kg/cum ) of size 595 mm x 595 mm conforming IS 14862 & BS 476 part 4,5,6,7 & 8 should be placed in Grid module to form a False ceiling. All complete as per drawing & direction of Engineer in charge. 4 mm thick Pearl Designer fibre cement board and E grid T- 2430/ 1510)

Providing and fixing of false ceiling with powder coatedexposed G.I grid suspension system ( E grid U-1520 or equivalent load carrying capacity ith mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c consisting of main runner 3600 mm long crosss tee 1200 mm / 600 mm long and wall angle. The wall angle shall be fixed on PVC dash fasteners on the perimetre of the wall by steel screws with distance 300 c/c . the main runners to be placed @ 1200 mm. The cross Tee 1200 will \be inserted in the pre cut slots of main runner at a regular interval of 600 mm to form a modular grid of 1200 mm x 600 mm. Additional cross tee of 600 will be placed perpendicular to the cross tee 1200 mm long to finally form a grid of 600 mm x 600 mm. Grid of module size 600 mm x 600 mm shall be supported by 6 mm dia. G.I wire form pulins / soffit. 15 mmthick OWAcoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595 mmx 595 mm with NRC complete as per drawing 7 direction of Engineer in charge. Acoustic False Ceiling ( with 15 mm thick OW Acoustic Board and E- Grid U-1520) .

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white. ) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel above 0.90

Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping) bothside laminated / 12 mm thick .

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; 6mm thick colour/ tinted/ smoke glass.

Supplying heavy duty hydraulic double action floor spring along with top pin/ set of pivots conforming to IS : 6315 or any approved make as per direction of Engineer in Charge.

Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer -in- Charge./ 100 mm

Supplying & laying of approved brand of scratch proof, semi flesible P.V.C. blended homogeneous marble venyle flooring in tiles conforming to IS: 3462-1982 fixing with synthetic acrylic adhesive after preparing the floor , levellling & smothening when necessary with suitable putty , as per design and instruction of the EIC.

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

Applying interior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper / acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of EIC./ two coats / water based interior grade Acrylic primer.

Applying acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermidiate coats including putty. Two coats. Area: .

Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.

French polishing to wood including preparing the surface.(for new surface)

Supplying,fitting and fixing of boiling water proof ply conforming to IS 710:1977 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design and approval of EIC ( excluding cost of supporting frame work and teak wood batten/ lipping) / a.(6 mm ply.).

Supplying, fitting and fixing decorative lamination conforming to IS: 2046:1995 as per approved make andbrand finish and thickness with fitting, fixing the same on particle board/ ply with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of EIC./ 1.0 mm thickness.

Anodised alminium tower bolt of approved quality manufacturer from extruded section conforming to IS 204/74 fittedand fixed with cadmiumplated screws./ 225mm longx 12 mm dia. Bolt.

Anodised alminium butt hings approved quality manufactured from extruded section conforming to IS 205/66 fitted and fixed with cadmiumplated screws./ 125x63x4.0mm

Anodised alminium D-type handle of approved quality manufactured from extruded section conforming to IS 230/72 fitted and fixed complete../ 150mmgripx12mm dia rod.

Brass hasp bolt of approved quality fitted and fixed completewith 16 mm dia. Rod with centre bolt and round fitting. / 300 mm long

Supplying, fitting and fixing CPVC pipes of approved make of schedule 80 conforming to IS-15778:2007 with all necessary accessories specials Complete in all respect including cost of all necessary fittings. a. 25 mm dia.

b. 15 mm dia.

Supply of High Density Poly ethylene Pipe conforming to IS - 4984-1985( Dia)

Supplying, fitting & fixing of Peet's valve fully gun metal standard pattern best quality of approved brand bearing ISI mark with fittings./ 25 mm dia.

Supplying, fitting and fixing white vitreous china sink in position on CI brackets including two coats of painting of brackets./ size 610mmx 450mmx 250mm

Suplying, fitting and fixing of C.P stop cock/ bip cock of approved make and brand.

Supplying, fitting and fixing of C.P. pillar cock with 200 mm extended Lever Handle equivalent to code no.5031 & model Jaquqr or similar brand.

Supplying, fitting and fixing of white vitreous chinawire best quality approved make wash basin with C.I. brackets on 75 mm x 75 mm x 75 mm wooden blocks, C.P waste fittings of 32 mm dia, one approved quality brass c.p pilar cock of 15 mm dia, C.P chain with rubber plug of 32 mm dia, Approved quality pvc waste pipe withC.P nut of 32 mm dia. , 900 mm long approved quality pvc connection pipe with heavy duty brass C.P nut including mending good all damages and painting. 650mmx 450 mm size.

Hydraulic door closer of approved quality as per I.S.I. Standard fitted and fixed complete./ medium ( Godrej)

GST 18 %