The West Bengal Small Industries Development Corporation Limited Tender

Side Table 4’x2’’x2.5’ Made of fully three chamber season Teak wood – side rail and back rail 100x32mm supported with 50x32 mm wood, leg slanted 50x50 mm to 38x38 mm and standard bend 95 mm. back rest top rail 100x32 mm round shape, bottom rail 75x32mm jointed by 5 nose of 25x19 mm flakes. Top 19 mm and single key joint. Handrail 60x38 mm round shape , height from seat 200mm. Shellac finish and water proofing treatment by Pedilite Showcase. Hettich or same grade hardware to be used.

White Board 4’x3’ Frame to be made of aluminum sheet-backed and square mitre corners, Porcelain surface, combination projection and dry-erase surface. Sample require before delivery.

Officers’ Table 1350x760x760mm.Made of ISI mark BWR Plywood with Laminate finish – Structure to be made of 19 mm ISI mark BWR Plywood contain 500 mm Shuttering cupboard and 125 mm sliding telescopic channel Drawer system in right side and vertical support of 19 mm plywood in left side. Front cover by 12 mm plywood by vertical & 45 degree sloping position in middle. Top of table 31 mm (19+12) mm thickness and 38 mm cantilever. All exposed edge to be finish with 6mm. CP Teak Leaping or laminate as required. All joint to be drove tail. Design is combined with two colors 0.8mm. Bell Laminate. Design need to approve Hettich or same grade hardware to be used.

Glass Black Board 6’x4’Deluxe model- Resin double coated steel surface with a top coat of Acrylic resin over high density 6 mm.Plywood or 3mm laminate. Surface is smooth, glossy and permits easy writing and erasing.

Drawing Table 3’x2’x36’’/39’’ Made of Malaysian Sal wood frame and hard wood top –Leg 45x45mm, side top Rail 150x20mm to 75x20mm slanted, front and back rail 75x20mm & 150x20mm respectively, three bottom rail 50x25mm supported with 20x45mm footrest in middle, a board rest will be fitted on top as require. Water resistance treatment is requiring before shellac finish.

Working Stool 16’’x16’’x12’’Made of Malaysian Sal wood frame and hard wood top –Leg 45x45mm, four top Rail 70x20mm, four bottom rail 50x25mm , overall frame size is 300/225x580(H)x400/300 mm. top 22mm. Shellac finish.

Drawing Board Imperial Size 33’’x23’’ This drawing board is widely use by draftsmen students for working on various drawings. I have an edge for T-Scale measuring in left side. Completely made from Pine wood.

Green Glass Board 2430x1200mm. To be made of 6mm. green colour glass facing acid frosted finish for writing and dust cleaning.75x38 mm Sal wood frame cover and 10mm. ISI BWR Plywood back. Paint and Shellac finish is required.

Working Bench 6’x4’x3’Island type Design to be made of three chamber seasoned Teak wood - 25mm Teak wood top fitted after framing 75x75mm leg and 100x38mm top rail of teak wood. Physics lab work tables require enough space to keep instruments. Electrical connections are required at right place to connect those instruments. Two double face Cupboards and four drawers are provided at the table to keep the personal equipments and protective items. All drawers are fitted telescopic channel, both drawer and cupboards are provided with lock and key. Shellac finish after water proofing treatment.

Working Bench with Granite Top/Ceramic Basin/Gas& Water Connection 8x’4’x3’Island type Designe to be made of Malaysian Sal wood frame, IS:303 Marine grade plywood shuttering cupboard and drawer system- Eight nos. of leg 70x70mm sal wood, top rail 95x38mm. and bottom rail 50x38 mm. The table has two double faces 610x710mm. Shuttering cupboard and 125x710 mm. drawer system run by telescopic channel. Top to be made of 19mm. Indian Black granite fitted with 19mm IS: 710 Marine grade plywood. Two nos. of Regnant Rack 610x300x300mm. to be fitted on top It has one salve in middle for keeping lab. Equipment. Electrical connections are required at right place to connect those instruments. One 303 SS Sink & Cock with water supply and proper drainage system lying at middle of the table. Completely water proofing finish is require. All visible part of plywood 0.82mm. Bell laminate finish and visible wood shellac finish. Colour of laminate to be suggested by Indenting authority..

Wooden Almirah with front Glass door for keeping chemicals. Made of four nos. of 16mm Teak wood panel fitted with 50x50mm. legs and 75x25mm. Teak wood rail structure containing five nos. of compartments including basement. Back cover with 12 mm ISI BWR grade plywood. All selves including top and bottom compartment made by teak wood. Front shutter made from 4 nos. of 5mm.trasparent glass fitted with 75x25mm teak wood structure as require. It provide godrej / hettich make lock and key for personalize and primary protection. High gloss shellac finish and 0.8mm milky white Bell laminate pest to visible part of plywood., Hettich or same grade hardware to be used.

Lab Table/Table for carpentry shop with fixing arrangement of Carpentry vice 6’x4’x3’ with 4’’x4’’ leg. Island type Designe to be made of Malaysian Sal wood frame and hard wood top - Four nos. of leg 70x70mm sal wood, top rail 95x38mm. And bottom rail 50x38 mm. Top to be made of 31mm. hard wood. It has two regnant racks for keeping lab. Equipment. Completely water proofing treatment is requiring. Shellac finish. Hettich or same grade hardware to be used.

Wooden Cabinet/ Wooden Board for practicing electrical wiring Island type Design made of ISI BWR Plywood with Laminate finish – Structure to be made of 19 mm BWR Plywood – It has five compartments both side including basement. Bottom to top slanted 605mm. to 480mm. 12 mm plywood to be fitted in middle. Inside to be finish 0.8 mm. milky white colour laminate and outside 0.8 mm. laminate colour approve by the Intender. All facing edge 6mm. CP Teak leaping with shellac finish. Hettich or same grade hardware to be used.

Computer Table 4’’x2’x2.5’ Made of ISI BWR Plywood with Laminate finish – Structure to be made of 19 mm BWR Plywood contain 480 mm Shuttering cupboard and 125 mm sliding telescopic channel Drawer system in right side. Key board tray and mouse rolled tray should be attached. It should have properly place to keep CPU, UPS and Printer. Top of table 19 mm thickness and 38 mm cantilever. All exposed edge to be finish with CP Teak 6 mm Leaping or laminate as required. All joint to be drove tail. Laminate 0.8 mm. Design need to approve. Hettich or same grade hardware to be used.

Study Table 8’x4’x2.5’ 6nos. leg 4’’x4’’ Island type Designe, made of Malaysian Sal wood frame and hard wood top –Leg 75x75mm. Slanted, four top Rails 100x22mm, four bottom rail 50x38mm. two suitable footrest is require in both side. top 25mm. hard wood. Shellac finish. Leg should be 75mm x75mm.

Moulded Armed Chair (Branded)Make of Supreme/Neelkamal

Wooden Table Made of ISI mark BWR Plywood with Laminate finish – Structure to be made of 19 mm ISI mark BWR Plywood contain 500 mm Shuttering cupboard and 125 mm sliding telescopic channel Drawer system in right side and same as left side. Front cover by 12 mm plywood by vertical & 45 degree sloping position in middle. Top of table 31 mm (19+12) mm thickness and 38 mm cantilever. All exposed edge to be finish with 6mm. CP Teak Leaping or laminate as required. All joint to be drove tail. Designe is combined with two colors 0.8mm. Bell Laminate. Designe need to be approved. Hettich or same grade hardware to be used.