The West Bengal Small Industries Development Corporation Limited Tender

Supply of 16 meter High mast lighting system with its accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear (Make of Gear Box : New Allen Berry works / Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral powertool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundation Bolt, Nut, Washer, Common Template all complete. Luminaire wiring materials not included in this item. (Make: Bajaj / Transrail / Valmond/ Utkarsh /Skipper)

Erection of high Mast (16 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work.

S.I.T & C of dust vermin and weather proof out door compartmentalized feeder pillar of suitable size made of 14 SWG M.S. sheet complete with the following:- a) Canopy at top (b) Hinged door open able on both side with heavy duty locking system. - 02 nos (c) Base frame with detachable cover on all sides made out of 14 SWG steel sheet. d) Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C. (e) Knock out holes at bottom for cable entry (f) Earthing stud - 02 nos (g) One coat of primer and two coats of approved make & colour of synthetic enamel paint. (h) 63 amps TPN MCB, 10KA breaking capacity- 01 No, (i) 40 Amps TP contactor (j) 24 hour Electronic timer – 01 No (k) power tool control with with 02 no. contactors (l) raise/lower push button (m) 10 amps TPN MCB, 10KA breaking capacity- 04 Nos, (n) Termination incoming/outgoing cables with suitable sizes of ferrules & compression gland. (Drawing to be approved by the EIC before procurement)