Technical Education And Training Department Tender

Screwdriver set., Set of 7

Insulated combination pliers. 150 mm

Insulated side cutting pliers. 150mm

Long nose pliers. 150mm

Soldering iron. 25 Watt, 240 Volt

Electrician knife. 100 mm

Tweezers. 150 mm

Digital Multimeter. (3 3/4 digit) ,4000 Counts

Soldering Iron Changeable bits. 15 Watt, 240 Volt

De- soldering pump electrical heated, manual operators. 230 V, 40 W

Steel rule graduated both in Metric and English Unit. 300 mm.

Precision set of screw drivers. T5, T6, T7.

Tweezers – Bend tip. Curved tip, SS body, 130mm x 10mm

Steel measuring tape. 3 meter

Tools makers vice. 100mm (clamp)

Tools makers vice. 50mm (clamp)

Crimping tool (pliers). 7 in 1

Magneto spanner set. 8 Spanners

File flat bastard. 200 mm

File flat second cut. 200 mm

File flat smooth. 200 mm

Plier - Flat Nose. 150 mm

Round Nose pliers. 100 mm

Scriber straight. 150 mm

Hammer ball pen. 500 grams

Allen key set (Hexagonal -set of 9). 1-12 mm set of 24 keys

Tubular box spanner. Set- 6-32 mm

Magnifying lenses. 75 mm

Continuity tester With 4 ½ Digit Display and 20k Count. TENMA 72-7730A, True RMS, ,100KHz bandwidth, Auto ranging,Duty Cycle:- 10% to 90%, Analogue Bar Graph, Full Icon Display, Data logging :100, Current measurement alarm, USB interface.

Hacksaw frame adjustable. 300 mm

Chisel - Cold - Flat. 10 mm X 150 mm

Scissors. 200mm

Handsaw 450mm. Hand Saw - 450 mm

Hand Drill Machine Electric with Hammer Action. 13 mm, 720W Professional Rotary Hammer with SDS plus, GBH 220

First aid kit. CONTENTS: - 1 x Cetrimide Solution - 100ml - 1 x Gauze Swabs - 100's - 1 x Cotton Wool - 100gr - 2 x Swabs Sterile - 5's - 1 x Forcep - 1 x Scissors - 4 x Triangular Bandages - Non Woven - 4 x Conforming Bandages - 75mm - 4 x Conforming Bandages - 100mm - 1 x Fabric Roll Plaster - 25mm

Bench Vice - 125 mm,( Cast iron Heavy Duty Bench Vice, Fixed Base )

Bench Vice - 100 mm, ( Cast iron Heavy Duty Bench Vice, Fixed Base )

Bench Vice - 50 mm( Cast iron Heavy Duty Bench Vice, Fixed Base )

Multiple Output DC regulated Power Supply DC Output - (A) 0-32 V, 2 A Continuosly variable by means of Coarse and fine controls (B) 5 V, 5A Ajustable from 4 V to 6 V (C) 0 - +/- 15 V, 1A Dual Tracking adjustable Display - 3 digit for Voltage & 3.5 Digit for Current LED indicator for Both Over Range Indication, Low Ripple and Noise, Resolution - Voltage - 10 mV, Current - 10 mA

DC Regulated Variable Programmable DC Power Supply DC Output - (A) 0-30 V, 0-3 with numeric keypad for settings of voltage and current and LCD Display of Voltage and Current power Current limit exceed indication (LED), Step increment for Voltage, Constent Voltage and current source, USB PC Interface with computer software.

LCR meter (Digital) Handheld. It can Measure six basic parameters R,C,L equipped with SMD Component Test Fixture LCR Meter (Digiatal) Heandheld 4-1/2 Digits, Dual LCD, Auto LCR / DCR / D/ Q / ESR / Phase Angle, variable frequency output of 100Hz / 120Hz / 1kHz / 10kHz / 100kHz. Features - Dual Backlit LCD display Auto LCR smart check and measurement Series/Parallel modes are selectable Ls/Lp/Cs/Cp with D/Q/ θ/ESR parameters Support DCR mode 200.00Ω~200.0MΩ Five different test frequency are available: 100/120/1k/10k/100k Hz Test AC signal level: 0.6mVRMS typ. Test range: (ex. F=1kHz)L: 200.00 μH ~ 2000.0 H C: 2000.0 pF ~ 2.000 Mf R: 20.000 Ω ~ 200.0 MΩ Multi-level battery voltage detector Support Backlight & Buzzer sound driverParameters displayed: DC Resistance, Serial Inductance, Parallel Inductance, Serial Capacitance, Parallel Capacitance, Serial Resistance, Parallel Resistance, Phase Angle, Equivalence Serial Resistance, Dissipation Factor, Quality Factor

70 MHz Mixed Signal Oscilloscope (4 Analog + 16 Digital Channel). With more than 20Mpt memory Real time Sampling 1GSa/sec , having LAN Interface with, I2C , SPI, Runt etc .. And RS232/UART, I2C and SPI trigger decoding functions, two channel 25MHz awg plus math functions like differentiation, integration, abs, AND,OR,NOT etc..an

25 MHz Arbitrary Waveform Generator with Digital Display for Frequency and Amplitude. Two Channel , 200MSa/Sec and 2Mpt memory with more than 150 different arbitrary waveforms and built-in 8th order harmonic generation and 150MHz Frequency counter PC Connectivity USB Device/Host and LAN

6 1/2 Digit Digital Multimeter, Measurement Functions: DC &AC Voltage, DC&AC Current, 2-wire & 4-wire Resistance, CAP, Diode, Connectivity, Frequency, Period, Any Sensor. Temperature: RTD, THERM,TC (B/E/J/K/N/R/S/T) PC Interface USB Host, USB Device, LAN (LXI-C) Measurement Speed 10k readings/sec

3GHz Spectrum Analyzer with built-in Tracking Generator frequency range 9 khz to 3.2 G hz. Resolusion band width (-3db):10hz to 1 Mhz. built in tracking generator min -148 dbm DANL display 8 inch TFT or more PC Interface : Usb host and device, LAN (LXI)

Multi Function Test & Measuring Tool for Field Applications and Testing compatible with Laptop. 300 MHz Bandwidth 2 Channel Digital Storage Oscilloscopes, Spectrum Analyzer. Arbitrary Waveform Generator Sine 50MHz , Square 15MHz,Triangle 100KHz , AM –FM Modulation, 16 Channel Logic Analyzer Frequency and Phase Meter USB 2.0/ 3.0 Interface

Analog Component Trainer with following Seven Basic Modules • Diode Characteristics (Si,Zener,LED), • Rectifier Circuits, • Diode as Clipper Circuit, • Diode as Clamping Circuit, • Zener as voltage regulator, • Transistor Type NPN & PNP, and CE Characteristics, • Transistor as a switch Breadboard for Circuit design DC Power Supplies - + 5V, 1A And ± 12V, 500 mA ( 12V both Fixed & Variable) AC Supply - 9V-0V-9V 500 mA 500mA Function Generator: Sine, Square, Triangle (1Hz to 100KHz) Modulating Signal Generator: Sine, Square, Triangle (1Hz to 10KHz). Voltage, current and frequency on board LCD display. PC Interface – Acquisition from two analog input channel Simulation Software

IT Workbench for computer hardware and networking. The bench comprises with Computer Hardware Training System (02 Nos.) The different circuit boards of PC/AT Computer are exposed on a PCB, LAN Training System with Wireless LAN as well to study Peer to Peer, STAR, RING Topology. Protocols: CSMA /CD, CSMA /CA, Stop N Wait, Go back to N, Selective repeat, Sliding Window, Token Bus, Token Ring, Colored representation of data in transmission & reception. Data transmission speed 10/100 Mbps, Smart managed 3 Layer and 2 Layer Switch, Media converter, POE Switch, Wi-Fi LAN card, IP Camera, Energy meter, LED tube light, Voltmeter and Ammeter will be fitted. Networking Fundamentals Teaching Simulation Software DSO 50MHz 4 Channel, 1GSa/Sec ,more than 20 Mpt memory DSO DMM : 41/2 Digit with LCD Display

Electronic circuit simulation software with five user licenses. Circuit Design and Simulation Software with PCB Design with Gerber and G Code Generation, 3D View of PCB, Breadboard View, Fault Creation and Simulation.

Different types of electronic and electrical cables, connectors, sockets, terminations.

Different types of Analog electronic components, digital ICs, power electronic components, general purpose PCBs, bread board, MCB, ELCB

SMD Soldering & De soldering Station with necessary accessories

SMD Technology Kit. SMD component identification board with SMD components Resistors, Capacitors, Inductors, Diodes, Transistors & IC’s packages. Proto boards with readymade solder pads for various SMD Components. SMD Soldering Jig.

Microcontroller kits (8051) along with programming software (Assembly level Programming) With six important different application modules 1. Input Interface Switch, Matrix Keypad, ASCII Keypad, 2. Display LCD, Seven Segment, LED Matrix, 3. ADC & DAC, 4. PC Interface module, 5. Motor DC, Stepper, Servo, 6. DAQ

Sensor Trainer Kit Containing following Sensors :- a) Air humidity and Temperature b) RTD c) Atmospheric Pressure d) Air Quality e) Smoke Detector Sensors f) Limit Switch g) Photo sensors h) Capacitive displacement

Different Microcontroller/Processor Training and Development Platform for AVR, PIC, ARM and Arduino. MCU PIC16F877A , 4MHz, Onboard programmer will program PIC Devices, USB Port MCU ATMEGA8515, 8MHz, onboard programmer will program ATMEGA series microcontroller, USB Port. MCU LPC2148 , 12MHz,LED 8Nos, ADC 10 bit 10Nos, DAC 10bit ,USB and RS232, RTOS support, JTAG Connector, USB2.0,Onboard Zigbee, I2C,SPI,RTC,DC motor, PWM, Sensor LM35, Display 16X2 LCD Display, Motor Drive: L293D 600mA (5-12V),Programmer USB Interface. Microcontroller ATmega328p (Arduino Based), 16MHz, Digital I/O Pins : 14 (of which 6 provide PWM output), Flash Memory : 16KB (of which 2KB used by boot loader). Each platform should have Bread DC Power Supplies +12V, -12V, +5V & - 5V, Breadboard to make circuits.

Internet of Things Explorer :- Processor : 64bit ARMv7 with 1GB RAM , Memory 32GB, OS: Open source Linux, Connectivity: Wireless LAN, Bluetooth, Zigbee, USB & Ethernet, HDMI interface, 1.77” Color TFT LCD , Driver for Stepper and DC Motor, six 16 bit Analog Input, RTC and 4-20mA input. Zigbee: 2.4GHz, Sensors: Temperature and Humidity, Air Quality, Soil Moisture, Ambient Light, Soil/Water temperature, PIR Sensor. GSM IoT Gateway - Quad- Band 850/900/1800/1900 MHz - GPRS multi-slot class, Control via AT commands. Explore physical and application layer protocols like RS232, RS485, GSM, Ethernet and MQTT, CoAP, HTTP, FTP. Cloud/server configuration includes HTML, Java, php and mySQL. IoT Node: Wireless 2.4GHz Zigbee, 5 Analog Inputs and at least 3 Digital Outputs, At least one I2C Channel, support OTA. Online Cloud/Server Services for 2 years.Battery 3.7V/4400mAH with Solar Panel, USB interface.

Field Interface and Protocol Simulation Kit : A console including : Any Branded Desktop Computer with Windows Operating System. 1. Ethernet Devices with Isolated Supply and port (i) 4 AI (0.1% FSR), 4 AO (0- 10VDC), Ethernet Port – Qty 1 (ii) 8 Relay Outputs, Ethernet Port – Qty 1 (iii) 8 Pulse Outputs, Ethernet Port – Qty 1 (iv) 8 Digital Inputs, Ethernet Port – Qty 1 (v) 4 RS485 Slave ports, 1 Ethernet Port – Qty 4 2. 16 Port Ethernet Switch for networking of field ethernet devices 3. SMPS to power up multiple ethernet based field simulation devices 4. Required Connectors, Switches and LED indicators for Field Interface circuits such as Digital Inputs, Relay Outputs, Analog Inputs, Analog Outputs, Pulse Signals 5. Software (i) Communication with simulation device on ethernet MODBUS TCP Protocol (ii) Field Interface simulation using HMI replica of Console for easy understanding of students. (iii) Port Simulation – Serial Port Terminal, TCP/IP, UDP, HTTP (iv) Protocol Simulation – MODBUS RTU Master/Slave, MODBUS TCP Master/Slave, DLMS Client IoT Protocol Simulations – MQTT topic publish subscribe simulation. Field Interface and Protocol Simulation Kit - 1. Ethernet Devices with Isolated Supply and port1. 4 AI(0.1% FSR), 4 AO (0- 10VDC), Ethernet Port - Qty 1 2. 8 Relay Outputs, Ethernet Port - Qty 13. 8 Pulse Outputs, Ethernet Port - Qty 14. 8 Digital Inputs, Ethernet Port - Qty 15. 4 RS485 Slave ports, 1 Ethernet Port - Qty 4 2. 16 Port Ethernet Switch for networking of field ethernet devices3. SMPS to power up multiple ethernet based field simulation devices 4. Required Connectors, Switches and LED indicators for Field Interface circuits such as Digital Inputs, Relay Outputs, Analog Inputs, Analog Outputs, Pulse Signals5. Software1. Communication with simulation device on ethernet MODBUS TCP Protocol2. Field Interface simulation using HMI replica of Console for easy understanding of students3. Port Simulation - Serial Port Terminal, TCP/IP, UDP, HTTP4. Protocol Simulation - MODBUS RTU Master/Slave, MODBUS TCP Master/Slave, DLMS Client . Protocol Simulations - MQTT topic publish subscribe simulationComputer -Processor: Make Intel Core i3 8th Generation Or Upper Generation Frequency - 3.0 Ghz or Higher With Intel Turbo Boost TechnologyCache Memory - Minimum 6 MB Cache or higher, Chipset : Intel Chipset On OEM MotherboardStorage : Type of Hard disk drive SATA, Hard Disk Drive Size 500 GB @ 5400 rpm RAM : 4 GB (1 x 4GB) DDR 4, Frequency 2400 MHz or 2666 MHz Operating System : Windows 10 Professional Preloaded with Certification (for Acadamic Use) Display : Display Size (Inch) 18.5" or Bigger Screen, LED Display Monitor Ports : Audio - 2.5/3.5 mm Audio jack (Audio In, Audio Out, Mic. In) with front Audio Port USB - USB 3.0/USB 3.1 Gen 1 (Minimum 4 USB Ports), Display - VGA & HDMI Port nput Devices : Keyboard - Standard Keys with Volume controls Vai USB Interface (OEM) Mouse - Optical Mouse with Scroll cotrols Via USB Interface (OEM) Others : DVD R/W 8x Or Higher Speed (Optical drive Integrated)

Wireless Communication modules for interfacing with microcontrollers a) RFID Card Reader b) Finger Print c) Zigbee d) GPS e) GSM f) Bluetooth g) WiFi Core 8051 MCU clocked at 11.0592 MHz, supporting both programming modes Key Pad and PC ,LCD for both programming mode and run mode, ready to run programmer to support family of controllers AT89C51/52 & 55, DC Power Supplies +12V, -12V, +5V & - 5V,Breadboard to make circuits, detailed learning content through simulation Software and following application modules : RFID Card Reader, Finger Print, Zigbee, GPS, GSM, Bluetooth and WiFi . LCD for both programming mode and run mode Should have ready to run programmer to support family of controllers AT89C51/52 & 55 DC Power Supplies +12V, -12V, +5V & - 5V Breadboard to make circuits Detailed learning content through simulation Software Should provided with application modules including RFID Card Reader, Finger Print, Zigbee, GPS, GSM, Bluetooth ,WiFi Communication : USB, Programming mode : PC mode, Hex keypad mode MCU : 8051 core, Crystal Frequency : 11.0592 MHz, Interconnection for modules : 2 mm patch cords and FRC cables, Power Supply : 110V - 260V AC, 50Hz Online Learning Material : Should include theory, procedure, reference results etc.RFID Card Reader Module Communication : TTL UART interface, Wiegand interface, Power Supply : +4.5V to +6.0V Operating current : 60 mA, Baud rate : 9600bps (default), Read frequency : 125KHz Digital output : 1/0 Bit, Read range : 50-60mm, TTL data format : 10 byte data (card no) Wiegand data format : 26 Bit, Antenna : In-build Antenna, Buzzer and LED : +5V Power Supply : From Microcontroller development platform, Interface : 20 pin FRC cable Finger Print Module Communication : TTL UART Interface, Power Supply : From Microcontroller development platform Operating Current : 100 mA, Baud rate : 57600bps (default), Storage capacity : 256 images Template size : 512 bytes, Character file size : 256 bytes, Sensor type : Optical, Resolution : 500 DPI Zigbee.Module Frequency : ISM 2.4 GHz, Antenna : Wire type, Network topologies : Point to point, Star, MeshADC : 4 nos 10-Bit ADC (internal), PWM output : 0 to + 3.3V, Digital input : 2 switches, LED : +5V Power Supply : From Microcontroller development platforms., Interface : 20 pin FRC cable GPS module for Embedded Platforms Channel : 12, Receiver Frequency : 1575.42 MHz, Time Accuracy : Synchronized to GPS time Serial Communication : 4800 Baud Rate (default), Power Supply : From main training board USB : 5 V, Power Consumption : 2 VA approximately, Study of GSM Application Module GSM capability : GSM 900 /1800, 850/1900 E-GSM, GSM data services : Asynchronous, Transparent & Non Transparent modes. 14.4 K bits/s, SIM Interface : 3 V, Relay : 5V/5A 20pin Socket : Dedicated socket for Micro controller interfacing, PC Communication : RS232/USB Bluetooth module for Embedded Platforms Frequency : 2.4GHz radio transceiver, RF transmit power : Up to +4dBm, Relay : 5V/5A 20pin Socket : Dedicated socket for Micro controller interfacing, PC Communication : USB WiFi module for Embedded Platforms GSM capability : GSM 900 /1800, 850/1900 E-GSM, Relay : 5V/5A, 20pin Socket : Dedicated socket for Micro controller interfacing PC Communication : USB The trainer should include online single user Classroom / laboratory teaching, learning and simulation software module on Embedded Technology

Sensors for Biomedical Application. All should be compatible with Sensor Training Platform ECG Sensor, Heart Rate Sensor, GSR, Temperature. (All sensors should be compatible with Sensor Training Platform &IoT Explorer mentioned above. Sensors should provided with Industrial Cable and connectors grade) ECG SENSOR Gain : 1100, Range : ±1.5mV (with VCC = 3.3V), Bandwidth : 0.5-40Hz, Input Impedance : 100GOhm Electrodes : 3 or 2 (virtual REF) HEART RATE SENSOR Operating Voltage : +5V DC regulated, Operating Current : 100 mA, Output Data Level : 5V TTL level Heart Beat detection : Indicated by LED and Output High Pulse, Light source : 660nm Super Red LED GALVANIC SKIN RESPONSE Operating: voltage : 3.3V/5V, Sensitivity : Adjustable via a potentiometer Input Signal : Resistance, NOT Conductivity, Output Signal : Voltage, analog reading . TEMPERATURE SENSOR Linear + 10-mV/°C Scale Factor, Temperature Range : −55°C to 150°C Range Operates Voltage : 4 V to 30 V, Low-Impedance Output : 0.1 Ω for 1-mA Load All should be compatible with Sensor Training Platform ECG Sensor, Heart Rate Sensor, GSR, Temperature : Microcontroller ATMega2560 Sensors and actuator connector : 10nos. Digital input/output pins : 34 nos. Analog input pins : 16 nos. UART : 2 nos. I2C : 1 no. Switch faults : 30 nos. Test points : 30 nos. Power Supplies : 5V and 3.3V Variable potentiometer: 1 no. (10K) Switches : 3 nos. Digital voltmeter and ammeter : 0 - 25V/10A, Buzzer and LED : 1 no. each Color LCD : 1.77 inch Battery : 3.7V/4400mAh USB : 2.0 Wi-Fi module : 1 no. (2.4GHz) Zigbeetransceiver : 2 nos. (2.4GHz/63mW) Flash memory : 256 KB of which 8 Kb For bootloader SRAM : 8 KB EEPROM : 4 KB Clock speed : 16 MHz Node operating voltage: 5V DC Temperature sensor : 0 -1000C GSR sensor : Analog voltage Heartbeat (Pulse-oxi meter) : Digital voltage ECG sensor : Analog voltage Power Supply : USB powered Weight : 2.5Kg (approximately) Operating conditions : 0-400C, 85% RH

ECG cum Heart Rate Monitor. Heart Rate Display 16x2 LCD Display , Measuring Range 30-300 heartbeats per minute, Real time ECG acquisition with 200 samples/ sec 8-bit A/D. Measuring Range : 30-180 heartbeats/minute, Accuracy : ± 2 heartbeats/minute Gain Adjustment : 800-2000 variable, Heart Rate Display : 31⁄2 Digit seven segment Tachycardia limit Range : 0 -180 heartbeats/min, Bradycardia limit Range : 0-100 heartbeats/min ECG Acquisition module : Real time ECG acquisition with 200 samples per sec. 8-bit A/D Converter with serial port (RS -232) interface Electrodes : Surface electrodes, Mains Supply : 230 V ±10 %, 50 Hz. 60 Hz on request Power Consumption : 2 VA (approx.) Heart-rate Display : 16x2 LCD Display Tachycardia limit Range : 0-255 heartbeats per minute Bradycardia limit Range : 0-255 heartbeats per minute ECG Acquisition module : Real time ECG acquisition with 200 samples/ sec 8-bit A/D Converter with USB interface. ECG Acquisition module : Real time ECG acquisition with 200 samples/ sec 8-bit A/D Converter with USB interface Electrodes : Surface or clamp (Ag-AgCl) electrodes Test Point : 7 nos. Power supply : 110V - 260V AC, 50/60Hz Weight : 1.5 Kg. (approximately) Operating Condition : 0-40 C, 85% RH Included Accessories : ECG electrode Gel, 5 Pin din to 3 Banana Cable (2mm), USB Cable (male to male), Power Supply, ECG Electrodes (Clamp type) - 5 nos. •Technical Specifications -- Real time ECG Analysis Software ECG can be analyzed in real time during acquisition Continuous recording with heart rate and amplitude calculation Review and analysis of recorded ECG file Heart-rate display with QRS detection by visual indication.

12 Lead ECG Simulator- Generating Range : 30-300 heartbeats/minute, ECG Amplitude Range : 200mV- 4V DC. Heartbeat indication : Both visible (LED) and Audible (Buzzer) controls Bipolar Leads : Lead I, Lead II, Lead III., Unipolar Leads : avR, avL, avF, Chest leads (V1-V6) Separate output channels Left arm (LA), Right arm (RA), Left leg (LL), Right leg (RL) and Chest Leads (V1-V6) for representing Standard Limb and chest leads configurations. A separate point indicated (12 Lead) to view the all 12 Lead standard ECG waveforms simultaneously. Test Point : 1 no. Low pass Filter 5KHz Cutoff frequency Mains Supply : 230 V ±10 %, 50 Hz . 60 Hz on request. Weight : 1.5 Kg. (approximately) Operating Condition : 0-40 C, 85% RH Included Accessories : ECG Gel, Banana to 5 pin, Power Supply - 1 no. Clamp Electrodes - 4 nos.

Respiration Rate Monitor. Respiration-Rate Display 16 x 2 LCD display, Piezo Electric Transducer, On board visual and audible Tachypnea and Apnea indicator, User selectable Apnea period control On board Respiration event indicator. Respiration-Rate Display: 16 x 2 LCD display Tachypnea Limit Range : 0-255 Breaths per minute Apnea Period Selection : 10, 20, 30, 60 or 90 Sec. Transducer : Piezoelectric Power supply : 230V, ±10% AC, 50/60Hz, Accuracy : ±2 breaths/minute Weight : 1.5 Kg. (approximately), Test Point : 7 nos. Operating Condition : 0-40 C, 85% RH, Included Accessories : Power Supply, Respiration Sensor - 1 no.

Understanding of Electro-Myograph . Filter (Band Pass) 1 Hz – 10 KHz Notch Filter 50Hz, Normal EMG Excited EMG Raw EMG Filtered EMG, Surface Electrodes (Ag- AgCl) information about 10 simulated EMG outputs. EMG Amplifier Technical Specifications :- CMRR : 100 dB, Filter (Band Pass) : 1 Hz – 10 KHz, Notch Filter : 50Hz, Simulated EMG Indication : Visible LED Electrodes : Surface Electrodes (Ag-AgCl), Power supply : 110V - 260V AC, 50/60Hz Weight : 1.5 Kg. (approximately), Test Point : 6 nos. Operating Condition : 0-40 C, 85% RH Included Accessories : Power Supply 3 nos. BTN to 5, Pin DIN Cable, Disposable, Electrodes - 50 nos. Scope of Learning • Study of bioelectric potential generated by group of muscles. Study of real time analysis of EMG signal (Surface EMG). Understanding of different standard EMG wave patterns like, Normal EMG, Excited EMG, Raw EMG, Filtered EMG etc.

Patient Health Monitoring Development Platform. IoT Based Platform to measure 20 different biometric parameters and wireless sent using two connectivity options available: Wi-Fi or Bluetooth Low Energy 4.0. Data can be visualized in standalone color display mode and sent to the Cloud in order to perform permanent storage or visualize and storage in real time by sending the data directly to a iPhone and Android ApplicationsWith CE / FCC / IC Certifications. Sensors Includes : SPO2 Sensor, ECG Sensor, Airflow Breathing, Blood Pressure, Glucometer, Spirometer, Body Temperature, EMGSensor, Galvanic Skin Response, Body Position, Snore Sensor, etc.

IoT Data Acquisition Systems & Protocol Converters. Connectivity to Cloud (IBM, Microsoft, Amazon) 24 VDC Isolated Supply, 4 Analog Inputs (0.1% FSR), 8 Pulse Inputs (up to 1 kHz), 8 Digital Inputs, 4 Relay Outputs. Ethernet IOT DAQ, WiFiIoT DAQ, Cellular (GSM / GPRS) IoT DAQ. MODBUS RTU to MODBUS TCP 24 VDC Isolated Power Supply, 4 Isolated MODBUS RTU Master Port Serial to Ethernet Serial to Wi-Fi Serial to GPRS.

IoT EDGE Computing Device. Embedded SCADA for 500 Tags, 24 VDC Isolated Power Supply, 4 MODBUS RTU Master, 32 GB Built in SD Card, 1 Wi-Fi Port, 1 Ethernet Port, 1 GPRS Port, 4 Analog Inputs (0.1% FSR), 8 Pulse Inputs (up to 1 kHz), 8 Digital Inputs, 4 Relay Outputs.

Cloud Based IoT SCADA. 1000 Tag License for Cloud based SCADA to connect IoT Devices and IoT based Smart Systems with Device Manager, IO Server, Alarm Server, Historian and Reporter, Web Server. Cloud Hosting Services for 20 devices for 7 years.

Interactive Smart Board with Projector. A Combination of - Ceremic Interactive White Board 82", Class Room Projecter - Short Throw, i3 Processor, 500 GB HDD & 4GB RAM, with digital surround Speaker, Key Board & Mouse.