Technical Education And Training Department Tender

O-ring remover/fixerColor Black Extended Length 25.00 centimeters Item Weight 1.21 pounds Part Number DRS002 Size SAE UNSPSC Code 31410000

Basic Hydraulic simulator as per market stander

Compressor unit, suitable for Pressure: 8 bar, Delivery: 50 lpm (or more), Reservoir capacity: 24 Litres (or more), 230V, 50 Hz, with pressure regulator and water separator

Pneumatic Trainer Kit, each consisting of the following matching components and accessories: I. Single acting cylinder Max. stroke length 50 mm, Bore dia. 20 mm II. Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type. III. 3/2-way valve manually-actuated, Normally Closed IV. 3/2-way valve pneumatically-actuated, spring return V. One-way flow control valve VI. 5/2-way valve with manually-operated switch VII. 5/2-way valve pneumatically-actuated, spring return, VIII. 5/2-way pneumatic actuated valve double pilot IX. 3/2-way roller lever valve direct actuation Normally Closed X. Shuttle valve (OR) XI. Two-pressure valve (AND) XII. Pressure gauge 0-16 bar XIII.Manifold with self-closing NRV, 6-way XIV. Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained- contact switch (1 NO + 1 NC), Contact load 2A XV.Relay station with 3 relays each with 4 contact sets (3NO+1NC or Change-over type), 5 A XVI.3/2-way single solenoid valve with LED XVII. 5/2-way single solenoid valve with manual override and LED XVIII. 5/2-way double solenoid valve with manual override and LED XIX.Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. XX. Profile plate, Anodised Aluminium 1100x700 mm, with carriers, mounting frames and mounting accessories

Hydraulic Trainer Kit, each consisting of the following matching components and accessories:I. Hydraulic Power pack, with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection,II. Pressure relief valve, pilot-operated.III. Drip tray, steel, size 1160 mm x 760 mm.IV. Pressure Gauge, Glycerin-damped, Indication range of: 0 – 100 barsV. Four-Way distributor, with five ports, equipped with a pressure gauge VI. Double acting hydraulic cylinder, with a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm.VII. Suitable Weight, for vertical loading of hydraulic cylinderVIII. Mounting kit for weight, for realizing pulling and pushing load.IX. 3/2-way directional control valve, with hand lever actuation.X. 4/2-way directional control valve, with hand lever actuation.XI. 4/3-way directional control valve, closed-centre position, with hand lever actuation.XII. Non-return valve.XIII. Pilot-operated check valve, Pilotto open XIV. One-way flow control valve, Withintegrated check valve XV. T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.)XVI. Profile plate, Anodised Aluminium, 1100x700 mm, with carriers,mounting frames and mounting accessories

Dial test Indicator

Portable Hand Drill(Electric) (0-13)mm capacity

Cut section Model of Mock layout of a motor car –electrical system working model, Wiring with parts and accessories of a car to be arranged according to the electrical circuit of a car. Working of Self-starter, Alternator, Wiper Motor, Horn, lighting system, sparks from plug to be shown with Distributor & battery.

Cut section working model of automatic transmission Gear box, Sectioned to show the internal mechanism of forward and reverse speeds.

Demonstration board of electronic Ignition system, ignition coil With HT coil, HT wires, Spark Plugs, ignition switch, coil, distributor, battery, and wiring

Demonstration board of MPFI system With injectors, rail, inlet manifold, throttle body, distributor, ECU, purge valve, sensor, crank pulley, fuel tank module.

Working Model of power windows Showing parts like door, glass with motor and its gear arrangement and operating switch.

Working model of torque converter, Model of LMV

Air conditioned CRDI Vehicle in running condition -LMV New vehicle with CRDI engine, 04 strokes, 04 cylinders, BS-VI, fitted with air condition.

Automotive exhaust 5 gas analyser and Diesel Smokemeter (for petrol & Diesel) Exhaust 5 Gas Analyzer Petrol ARAI approved to check CO, CO2, O2, and HC& NO. Diesel Smoke Meter ARAI approved.

Diesel Engine – CRDI - 4 strokefor Dismantling and Assembling with Swiveling Stand. Latest 4 Stroke 4 cylinder turbo charged CRDI Engine, 800-1600cc, in running condition, with ECM, BCM (optional), and all sensors, wiring, fuel feed & cooling system & instrument cluster.

Four stroke petrol engine with CNG setup-working condition , Latest 4 Stroke 3/4 cylinder MPFI Engine in running condition 800- 1600cc with ECM, BCM (optional) and all sensors, wiring, fuel feed system, cooling system& instrument cluster with CNG/ Petrol selection switch on Panel, N.B.: If ECM and BCM are available as one control unit can be purchased instead ECM, BCM as separated.

Petrol Engine(2-stroke) Motor Cycle/Scooter along with special tools and accessories (Optional) * If not available in market video demonstration may be used to explain working. Cut Section of 2 Stroke 2 W Engine, Single Cylinder

Air bag simulator Driver & Co Driver Air Bags, Seat belts with front seats, crash sensors, air bag ECU, Wiring Harness

Tyre Changer Machine Motorized Pneumatic Type, Rim clamping facility, and bead breaking facility with air inflating device.

Working Condition of Petrol MPFI Engine Assembly with fault simulation board Latest 4 Stroke 3/4 cylinder MPFI in running condition,800-1600cc with ECM, BCM and all sensors, wiring, fuel feed system, cooling system & instrument cluster with Fault setting bank for minimum 6 sensors with diagnostic socket&Scanner to read the faults. Engine management circuit diagram to be printed on the panel board

Working Condition of E.V (Electric Vehicle ) Car Electric car with all required accessories including battery charger

Steering assembly – 1.Worm & roller 2. Recirculating ball 3.Power steering 4. Electric Assisted Power Steering 1. Worm & Roller steering assembly with drop arm. 2. Recirculating Ballsteering with pitman shaft and drop Arm. 3. Hydraulic working power steering with steering wheel, column, flow pipe, hydraulic pump, oil reservoir. 4. Electric Assisted Power Steering

Piston Ring expander and remover.

Piston ring compressor

Injector testing set (Hand tester)

Linen Dori

Diesel Generator SET 62.5 KVA, AC, 3 PHASE , 415 VOLT

CNC SIMULATOR

INTEGRATED MULTIMEDIA SKILL DEVELOPMENT SOFTWARE FOR CNC MACHINING

INDUSTRY HELMET

Solar Photovoltaic Power Plant (10kw) PV Module type- Polycrystalline/ Monocrystalline, No. of PV cells per Module-72 Cells, Total number of PV modules-28-32 Nos,Max.Power, Pmp@STC- 300/330/375Wp, Max.power tolerance (%)- Complied, Max.power voltage (Vmp)- 36.5 V,Max.power current (Imp) @STC- 8.22 A, Open circuit voltage,Voc@STC- 45 V, Short circuit current, Isc@STC-8.89 A, Nominal voltage-24V, Nominal Wattage- 300Wp, Temp.coefficient of Voc-0.3104, Fill Factor-Complied,Temp.coefficient of Voc (%/C)-0.3104,Temp.coefficient of Pmp(%/C)-0.3948,Temperature Co-efficient of Isc %/°C)-0.0687,Normal Operating Cell-46+/- 2, Temperature (NOCT) (°C)- 46+/- 2, Operating Temperature(°C)-40 to 80, Max Temperature rise of solar cells under severe working conditions over Max. Ambient Temp.-10 to 15deg, Module is suitable to operate at 500 ambient Temp-Yes,Cell efficiency-16%-19%, Module efficiency-15.46%-15.63%, Temp.coefficient of Voc (%/C)-0.3104,Maximum System Voltage-36.5V Vmp, No. of By-pass Diodes-3 nos, Mounting arrangement for Solar Module, Clamp type, Solar Module frame-Anodized Aluminium, material-Tempered & Low Iron Glass, Finish-Ethylene Vinyl Acetate,Types of Sections used- Aluminium/MS sections, Module dimensions (1960 x 990 x 42)mm, PV panel Weight (kg)-20.5-22.5Kg, Module Life (minimum)-25Years,PV array area(sqm)-64sqm approximate, Guaranteed Output confirm- Yes,Total Plan foot Area(sqm)- 120sqm, Control Area(sqm)-120sqm, String monitoring Unit-Built in PCU/Inverter