Technical Education And Training Department Tender

Compressor unit suitable for Pressure: 8 bar, Delivery: 50 lpm (or more), Reservoir capacity: 24 Litres (or more), 230V, 50 Hz, with pressure regulator and water separator

Pneumatic Trainer Kit, each consisting of the following matching components and accessories: I. Single acting cylinder Max. stroke length 50 mm, Bore dia 20 mm – 1 No. II. Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type – 1 No. III. 3/2-way valve manually-actuated, Normally Closed – 2 No. IV. 3/2-way valve pneumatically-actuated, spring return. V. One-way flow control valve – 2 No. VI. 5/2-way valve with manually-operated switch – 1 No. VII. 5/2-way valve pneumatically-actuated, spring return – 1 No. VIII. 5/2-way pneumatic actuated valve double pilot – 1 No. IX. 3/2-way roller lever valve direct actuation Normally Closed – 2 No. X. Shuttle valve (OR) – 1 No. XI. Two-pressure valve (AND) – 1 No. XII. Pressure Gauge 0 - 16 bar - 1 No. XIII. Manifold with self-closing NRV, 6 way – 1 No. XIV. Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch (1 NO + 1 NC), Contact load 2A, XV. Relay station with 3 ralays each with 4 contact sets (3NO+1NC or Change-over type), 5 A – 1 No. XVI. 3/2-way single solenoid valve with LED - 1 No. XVII. 5/2-way valve pneumatically-actuated, spring return with manual override and LED - 1 No. XVIII. 5/2-way pneumatic actuated valve double pilot with manual override and LED - 1 No. XIX. Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. - 1 No. XX. Profile plate, Anodised Aluminum 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation) – 1 Set.

Pneumatic Workstation with 40 square mm aluminum profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2 ) Drawer – Size (Approx.) – L460mmxW495mm xH158)mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm and (3) Drawer slide height (Approx.) 85mm.