Technical Education And Training Department Tender

Pneumatic Trainer Kit Specification: - Consisting of the following matching components and accessories: I. Single acting cylinder- Max. stroke length 50 mm, Bore dia 20- 1 No. II. Double acting cylinder- Max. stroke length 100 mm, Bore dia 20 mm, magnetic type- 1 No. III. 3/2-way valve- manually-actuated, Normally Closed- 2 Nos. IV. 3/2-way valve- pneumatically-actuated, spring return- 1 No. V. One-way flow control valve- 2 Nos. VI. 5/2-way valve- with manually-operated switch- 1No. VII. 5/2-way valve- pneumatically-actuated, spring return- 1 No. VIII. 5/2-way pneumatic actuated valve- double pilot- 1 No. IX. 3/2-way roller lever valve- direct actuation Normally Closed- 2 Nos. X. Shuttle valve (OR)- 1 No. XI. Two-pressure valve (AND)- 1 No. XII. Pressure gauge- 0-16 bar- 1 Nos. XIII. Manifold with self-closing- NRV, 6-way- 1 No. XIV. Pushbutton station for electrical signal input- with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch (1 NO + 1 NC), Contact load 2A- 1 No. XV. Relay station- with 3 ralays each with 4 contact sets (3NO+1NC or Change-over type), 5 A- 1 No. XVI. 3/2-way single solenoid valve- with LED- 1 No. XVII. 5/2-way single solenoid valve- with manual override and LED- 1 No. XVIII. 5/2-way single solenoid valve- with manual override and LED- 1 No. XIX. Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof.- 1 No. XX. Profile plate, Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation)- 1 Set. [5 (Five) years Annual Maintenance Contract (AMC) beyond normal guarantee / warranty period is applicable for this item. Yearly price (price for one year) of 5 (five) year Annual Maintenance Contract (AMC) is to be quoted in a separate column in BoQ.]

Pneumatic Workstation Specification: - With 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mm x W495 mm x H825mm and (3) Drawer slide height (Approx.) 85mm. [5 (Five) years Annual Maintenance Contract (AMC) beyond normal guarantee / warranty period is applicable for this item. Yearly price (price for one year) of 5 (five) year Annual Maintenance Contract (AMC) is to be quoted in a separate column in BoQ.]

Hydraulic Trainer Kit Specification: - Each consisting of the following matching components and accessories: I. Hydraulic Power pack- with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjustable from 0 – 60 bar, (3) oil reservoir, ≥5 litres capacity having sight glass, drain screw, air filter, and P and T ports.- 1 No. II. Pressure relief valve- pilot-operated- 1 No. III. Drip tray, steel- size 1160 mm x 760 mm.- 1 No. IV. Pressure Gauge- Glycerin-damped, Indication range of: 0 – 100 bar- 1 No. V. Four-Way distributor- with five ports, equipped with a pressure gauge- 1 Set. VI. Double acting hydraulic cylinder- with a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm.- 1 No. VII. Suitable Weight- for vertical loading of hydraulic cylinder- 1 No. VIII. Mounting kit for weight- for realizing pulling and pushing load.- 1 No. IX. 3/2-way directional control valve- with hand lever actuation.- 1 No. X. 4/2-way directional control valve- with hand lever actuation.- 1 No. XI. 4/3-way directional control valve- closed-centre position, with hand lever actuation.- 1 No. XII. Non-return valve.- 1 No. XIII. Pilot-operated check valve- pilot to open.- 1 No. XIV. One-way flow control valve- with integrated check valve.- 1 No. XV. T-Connector with self sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.).- 2 Set. XVI. Profile plate, Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation).- 1 Set. [5 (Five) years Annual Maintenance Contract (AMC) beyond normal guarantee / warranty period is applicable for this item. Yearly price (price for one year) of 5 (five) year Annual Maintenance Contract (AMC) is to be quoted in a separate column in BoQ.]

Hydraulic Workstation Specification: - With 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm and (3) Drawer slide height (Approx.) 85mm. [5 (Five) years Annual Maintenance Contract (AMC) beyond normal guarantee / warranty period is applicable for this item. Yearly price (price for one year) of 5 (five) year Annual Maintenance Contract (AMC) is to be quoted in a separate column in BoQ.]

Cut-section models Specification: - For hydraulic components.(i) External Gear Pump of size having delivery rate 2.5 Ltr./min, at 1400 r.p.m., on pressure- 60 bar., (ii) Double Acting Cylinder of size having stroke length 200 mm, bore dia- 20 mm., (iii) 5/2 (5 port 2 position) hand operated Directional Valve., (iv) 4/3 (4 port 3 position) hand operated Directional Valve., (v) Non-return Valve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (vi) Pressure Relief Valve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (vii) Pilot Operated Check Valve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (viii) One-way Flow Control Valve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (ix) Pressure Gauge of size having capacity 120 PSI or higher., (x) Accumulator of size having capacity 1 (one) Ltr. or higher.