Technical Education And Training Department Tender

Carrier for mounting components, such as PB & relay boxes.

Cut section model for pneumatic components

Hydraulic Trainer Kit, each consisting of the following matching components and accessories: I.Hydraulic Power pack with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjustable from 0 – 60 bar, (3) oil reservoir, ≥5 litres capacity having sight glass, drain screw, air filter, and P and T ports. 1 no II.Pressure relief valve pilot-operated 1 no III.Drip tray, steel size 1160 mm x 760 mm. 1 no IV.Pressure Gauge Glycerin-damped, Indication range of: 0 – 100 bar 1 no V.Four-Way distributor with five ports, equipped with a pressure gauge 1 no VI.Double acting hydraulic cylinder with a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm. 1 no VII.Suitable Weight for vertical loading of hydraulic cylinder 1 no VIII. Mounting kit for weight for realizing pulling and pushing load. 1 no IX.3/2-way directional control valve with hand lever actuation 1 no X.4/2-way directional control valve with hand lever actuation. 1 no XI.4/3-way directional control valve closed-centre position, with hand lever actuation. 1 no XII.Non-return valve. 1 no XIII. Pilot-operated check valve pilot to open. 1 no XIV. One-way flow control valve with integrated check valve. 1 no XV.T-Connector with self sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.). 2 no XVI. Profile plate,Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation) 1 no

Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:(1) Work Table – Size (Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mm x W495mm x H825mm and (3) Drawer slide height (Approx.)

Cut-section models for hydraulic components

Metric outside micrometer (Plain) 0-25 mm LC 0.001 mm

Surface plate CI 400X630 mm (Grade-1)

Dial gauge plunger type 0.01 to 10 mm

Sine bar 0.01 mm least count (200 mm length)

Surface roughness tester

Electricl symbol and accessories chart

Pipe vice cast iron with hardened jaw open type 100 mm

Hand vice 50 mm jaw

Crimping tool 1.5 sq mm to 16 sq mm, 16 sq mm to 95 sq mm

Torque wrench 8N-m to 15N-m

MCCB 100 Amps triple pole

Plumbing tools

Soldering iron soldering station with necessary accessories

Lead acid battery 12V, 100Ah

Motorized bench grinder AC mains operated

Solar photovoltaic module 250w thin film module

DC LED lamp 3W, 5W, 10W (50nos. Each)

Demonstration kit for wind generation (wind turbine with blower) 300 w

Split A.C 1.5 Ton with R- 134a or R-22 with Reciprocating Compressor ( Wall mounted )

Ductable A.C 1.5 Ton R-134a or R-22 Reciprocating Compressor with G.I. ducting ( 15 Metre)

Deep Freezer 200 L, carrying with HFC-134a and Reciprocating Compressor

Display Cabinet 2 Ton capacity ( SS body Temp. Range 50 C to -20 C )

Frost Free Refrigerator 200 L, carrying with HC blend of temp. display in front .

Air conditioning service unit (car) - : Refrigerant Recovery rate – 30 kg per hour with vacuum pump, automatic drawnCompressor capacity – 0.32 Kw Charging Cylinder capacity – 10 Kg Accessories : Adopter for 500 ml bottle, used oil container spare filter for servicing, Universal flush container ,High pressure Hose – 5 Mtr Low pressure Hose – 5 Mtr High pressure Adaptor Low pressure Adaptor AC service unit to be supplied with Air conditioning trainer kit .

Trolley type portable air compressor : Air tank capacity – 45 Liters Compressor type – Reciprocating ( Maximum flow rate – 51 to 120 cfm ) , Horse Power – 1 H.P

Torque Converter: Cut Sectioned model

Sine Bar 200 mm

Telescopic Gauge 8 mm to 150 mm

Universal Dial Test Indicator Plunger Type - Range 0-10 mm , Graduation 0.01 mm complete with clamping devices and magnetic stand

Scribing Block Universal 300 mm

Combination Set with 300 mm rule

Vernier Bevel Protractor with 150 m Blade

Digital Vernier Caliper 0 - 300 mm

Digital Micro Meter 0-25 mm Reading 0.01 mm with NABL Accredited Lab. Certificate

Micrometer Outside 0-25 mm Reading 0.01 mm with NABL Accredited Lab. Certificate

Vernier Caliper Depth 200 mm / 8 inches with metric & inch scale ( L.C. = 0.02 mm) with NABL Acceredited Lab Certificate

Sine Bar with Centres 200 mm

Slip Gauge Metric (87 Pcs in Box), Workshop Grade

Vernier Height Gauge (300 mm)

Vernier Micro Meter (0-25 mm) L.C.-0.001 mm

Vernier Bevel Protractor (300 mm)

Dial Vernier Caliper Metric (200 mm ) L.C.- 0.05 mm

Combination Set ( 300 mm )

Surface Plate ( Granite ) 1000 mm X 1000 mm

Combination Set (300 mm)

Temperature gauge (range 0-150 decree celcious

Laping plate Round type 6 inch dia

Dial test indicator on stand 0.01 mm least count

sine bar, 125 mm length

Digital vernier caliper , 0-150 mm with least count 0.02 mm

Digital Micrometer outside, 0-25 mm L.C. 0.001 mm

Digital vernier caliper, 0-200 mm L.C. 0.01 mm

Out side Micrometer,0-25mm least count 0.01mm

Digital wattmeter,230V,1KW,50Hz

AC Energy Meter,3Phase,15A,440V Induction Type

Frequency Meter,45-55Hz

Magnetic FluxMeter 0-500 tesla

Lux Meter,Lux meter LCD read out 0.05to 7000 lumens with battery

Function generator,2-200KHz,sine,Square,tragular 220V,50Hz,Single Phase