Tarakeswar Development Authority Tender

b)Erection the Bollard, Spot Light with necessary foundation, including all accessories .

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire(Brand approved by EIC) in suitable size PVC casing-capping(Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire forECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed onModular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish a) Av. run 6 mtr [PVC casingcapping on surface and Switch board concealed] (PWD Sch. item no-3(b) at P-E-21)

Supply & Fixing 240 V, 4 nos. 6A plug socket with separate 4 nos. 6 A Piano key type switch,indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S &F 240x200x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (PWD Sch. item no-24 at P-E-7)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting,connection & provision for earthing attachment. 4 way (PWD Sch. item no-11 at P-D-9)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm)single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.a) On Board (PWD Sch. item no-3 (a) at P-E-24)

Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

a)32A DP

b)63A TPN

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Earthing with 15.88 mm dia 1.8 mtr. long G.I. earth spike against each pole .

Supplying of High Density polythene pipe conforming to IS 4984-1985, 6kg/sq.cm (working pressure), complete with fitting. 40 mm Dia.

Supply of 1.1 KV grade PVC insulated Aluminum conductor armoured Cable 4 core 10 Sq.mm, Make: Incab/CCl/Gloster/Crystal / Havells / Polycab

SITC of additional assessories for installing the lights , lighting conductors as per the final drawing , consisting of conduites , joints, nut & bolt etc and other necessary items.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC Armoured cables as below. For 4 core 10 Sq.mm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC Armoured cables as below. For 2 core 10 Sq.mm

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials : For 4 core 16 Sq.mm

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials : For 4 core 10 Sq.mm

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials : For 2 core 10 Sq.mm

Supply & fixing of Feeder pillar box( over all approx dimension 1400mm x 750mm x 525mm fabricated from 3 mm & 6 mm thick MS plate as per drawing in brick cement foundation (1:6) plastering (12 mm thick) neat cementing (1.5 mm thick) including supplying & fixing 250 mm long 16 mm dia bolts, nuts, washers, back plate etc. including supplying & fixing sheet metal (16 SWG) iron Clad Bus Bar chamber on angle iron frame with 4 Bars , 415 V, 63A, 4x20x5mm and 1 no 63A main switch,1 no 63A 4 pole MCB, 2 nos 4P 32A MCB , 4 no 4P 32A MCB , 1 No Time switch model TSQ-100, Type-QTN, 1 no contactor cat no-SS90910 ( or equivalent ), 1 no Auto / Manual selector selector , push Button sets and 2 nos earthing with 50 mm dia G.I. pipe 3.64 mm thick x 3.04 Mtr long and 1 x 4 SWG GI (Hot Dip ) wire ( 4 Mtrs long ), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection ( 1 Mtr. long ) to be fitted with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mtrs. Below the ground level 4 nos as per drawing & direction of EIC.

Add GST @ 12% from serial no 1 to 22 excluding 3 & 4

Add Labour Welfare Cess @ 1% from 1 to 23 excluding 3 & 4