Sundarban Affairs Department Tender

Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..

Supply fitting and fixing Boundary Pillars as per type design IRC-25 1969 with cement concrete 1:2:4 with stone chips including cost of providing 2 nos. of 6 mm dia M.S. rods of length 1.84 m in the form of inverted U-Shape as main reinforcements placed crosswise to each other and 5 nos. of round shaped 6 mm dia M.S. rods used as binders; the placing of 1st binder should be at 75mm below the top finished surface and the other 4 nos. of binders should be placed at 1.85mm C/C and to be of 90 cm. long with 20cm dia at the base tapering to15cm dia at the top with head properly round and sunk inscriptions (as directed) at the side with 60cm embedment into the ground after making hole in the ground of size 50cm x 50cm x 75cm and repacking the hole properly with cement conc. 1:4:8 with stone chips and finishing the exposed portion of 30cm length with white wash & painting the inscription as directed including carriage of the post to the site with loading & unloading etc. complete in all respect. With Pakur variety stone chips