Sundarban Affairs Department Tender

Providing special type of M.S. screw cutter including fitting and fixing

Labour charges for screw driving the R.C.C. pre-cast piles depth of minimum 8.O M upto 9.00 M below bed level as decided by the Engineer-in-charge in tidal river holds and hoisting the piles using pully fitted to the monorail gentry girder or any other Suitable arrangement for avoiding any damage of the R.C.C. precast piles fixed with special type screw cutter with M.S. collar with fixing steel pin including placing the same on pin points position with the help of pile guide monorail gantry girder or any other arrangement by hoisting capstain manually including cost of hire charge of barge, chain pully, lunch and other machineries, supplying of fuel etc. (Engineer-in-charges reserves the right to reject the pile if the pile is out of plumb beyond the permissible limit or due to breaking cracking and any sort of damages) including mobilization all pants & machineries for erecting & driving the piles as per drawing and design & specification etc. complete.

Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose(ifany), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent tocorrect shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge..

Labour charges for carrying the precast R.C.C. Piles, girder, deck slab, step & other components from casting yard / barge hold by the arrangement of chainpully or any other method fitted & fixed over the barge, without damaging the components including hoisting in proper position and lowering down and placing in position with the help of chain pully or any other method & fitted & fixed properly over the piles in tidal river including hiring charge of barge, launch / best etc. and fitted & fixed in proper position setting etc. complete (Engineer-in-charge reserve the right to reject the components if it breaks, cracks and damage etc.)

Providing heavy duty dense rubber feeder of approved quality fitted & fixed in position as per drawing. a) 250 mm. dia x 150 mm. long.

Supplying fitting and fixing street light with 80 mm G I Pipe (4.0m long) and necessary fittings including all cost of materials , light, battery and others eqipments and labour charges for fitting as per direction of Engineer in charge (LED 1 Street Light PV M-odule : 35W Panel Solar Charging full sunlight : 8 Hrs Battery Capacity: 5200mAh Battery nominal voltage: 14.8V)

Construction of Sign Board with 0.45m x 0.60m (height) granite slab of 15-18mm thk.engraving the lettering over it as directed by the E.I.C. fitting and fixing complete over brick masonry (with 4:1 cement mortar) platform covered with 4:1 sand-cement plaster with neat cement punning all complete as per direction & design supplied by the E.I.C.

Add 12% for GST

Add 1% Cess