State Warehousing Corporation Tender

Supplying, fitting & fixing single skin color coated trapizoidal profile for wall cladding, roof shall be made of 0.45 mm BMT(Base Metal Thickness) (0.5mm TCT(Total coated thickness excluding paint), G550(min 550 yield strength), of Zincalume metalic coating(ISI5965) with high solar reflection index (SRI) value for better colling as per thermatech technology, 1000-1015mm effective cover width with five major corrogation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti capillary grove and return leg, the steel sheet shall be fastened with 40micron zinc coated or 25 micron zinc tin alloy coated , hex head self drilling screw as per IS 3566-2002 class 3 fastener. the base steel shall be coated with zinc aluminium alloy zincalume (AZ150) (i.e. 55%Al,43.4% Zinc, 1.6%Si) minium of 150gm/m2 coating total on both sides, pre-painted with colorbond XRW(xterior roofing walling) paint system of 35micron super durable polyster paint (SDP) with stable inorganic pigment with no lead contents confirming ISI5965. The sheet shall be free from defects and have brand marking of the manufacturer giving product details on the back of the sheet at regular interval confirming genuinity of the material. (i) in roof 0.5mm th. sheet P-82, I. no.- 14(10th corrigenda)

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof

(a) Anti termite treatment to the soil under floor with chemical emulsion by admixing Imidacloprid emulsifiable concentrates (72ml in 34 liters) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soilholoe using hand operated pressure pump to squirt chemical emulsion into the pump squirt chemical emulsion into the holes at the rate of one litre per hole. the hole shall be sealed after operation to match with the existing floor. the entire work is to be carried oud as per specification laid down at table 1 & in para 5.3.1.3 of code I.S.-6313(Part-III)-2013 .

A)Filling in foundation or plinth by fine sand in layers not exceeding 150 mm ....) (B) Do - by fine sand

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).(iii) 35 mm. thick

A) Stitching crack in brick wall by carefully cutting out face brick 125 mm. deep into the wall, cleaning the gap and filling up the same with precast cement concrete block carefully set in cement mortar (1:3) including mending good damages and finishing the surface to match with adjacent areas complete as per direction. (i) With plaincement concrete blocks (1:1½:3) with stone chips and nominal reinforcement (b) Block size 250 x 125 x 75 mm. Cement-1.85 Kg/No.)

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement morter (a) 20 mm thick plaster

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade)