Sriniketan Santiniketan Development Authority Tender

Cement concrete with graded stone ballast (40 mm. size) excluding shuttering in (6:3:1) proportion.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary mix Cement concrete (1:1.5:3) with graded stone chips (20 mm. size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. (i) Pakur Variety (page -14, item no - 7(i).

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightning and removal of loose rust ( if necessary) cutting to requisit length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (page -27, item no - 15a(i)). i) Tor steel / Mild steel

Brick work with 1st class bricks in cement mortar (6:1) (a) In foundation and plinth.

125 mm thick brick work with 1st class bricks in cement mortar (4 :1) and using H.B. netting in every third layer at any floor..(I- 29, Page- 31)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] . (ii) 15 mm. thick plaster (6:1)

Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coats

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m..( Page -64,IT No=35)PWD Build

SANITARY WORKS : Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer,(b) 1000 litre capacity ( Page-37 ,Item no =06 PWD)

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Labour for hoisting plastic water storage tank. capacity.Upto 1st story from G.L (Rs.154)

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).(Page-06, Item no-07, PWD )

Supplying, fitting and fixing concealed GI pipes of TATA make including chase cutting and filling the same with 1:2:4 concerete after laying of pipes with all necessary acessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials.). For conceald work, a) 15 mm dia medium quality

Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). For exposed work. a) 25 mm dia medium quality(distrubution line)

b) 40 mm dia medium quality (distrubution line)

b) 50 mm dia medium quality (rising line)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 Kg per Sq.cm (for water lines only)a) 25 mm

b) 40 mm

Construction inspection pit of inside measurement 600x600xupto 600mm (depth) with 250mm thick at 1st class brick work in cement mortar (4:1) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (6:3:1) with jhama khoa over a layer of jhama brick flat soking,15mm thick (4:1) cement plaster to inside walls and out side walls upto GL and 20mm thick (4:1) plaster to bottom of the pit, providing necessary invert with cement concrete (6:3:1) with jhama chips as per direction, neat cement finishing to entire internal surface, top of the pit cover with 100mm thick R.C.slab (3:1.5:1) with stone chips and necessary reinforcement upto 1% and shuttering including 10mm thick cement plaster (4:1) in all external surface of the slab & fixed in the slab one 560mm dia R.C.C.Manhole cover (heavy type) of approved makes supplyed, fitting & fixing in the slab with necessary fittings necessary earth work in excavation sorts of soil, filling sides of pit, with earth and removing spoils after work complete in all respect.with pakur variety

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (4:1) band all round and cement brick work (4:1) upto 0.90 metre from top with 20 mm thick cement plastering (4:1) to inside face upto the depth of cement brick work, 15 mm thick cement plaster (4:1) on outer face from top of the well upto G.L. and 6mm thick cement plaster (1:4) on top of the RCC cover slab including filling bottom 1.00 M of inside of the well with brick metal (50 mm to 63 mm size) including RCC cover slab of 100mm thick with cement conc.(1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia RCC manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the excess earth from the premises as per direction complete in all respect with all cost of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.0 m inside dia.

Add GST 18 %

Add CESS 1 %