Sriniketan Santiniketan Development Authority Tender

Plain Cement Concrete with graded stone chips (40mm dn) excluding shuttering (1:3:6))

(A)Brick work with 1ST class bricks in cement mortar (1:6) including cost of scaffolding and other incidental work etc. complete.(i)FOUNDATION AND PLINTH

(ii) In Superstructure GROUND FLOOR

Ordinary Cement Concrete (mix 3:1.5:1) with graded stone chips (20 mm.down) excluding shuttering and reinforcement, if any, in ground floor

Hire and Labour charges for shuttering with centering and necessary staging using approved stout props and hard wood planks for concrete slab beam column etc in/c fitting fixing and striking out after completion of work 25mm to 30 mm thick. Wooden shuttering.

Hire and Labour charges for shuttering with centering without staging with hard wood planks for concrete slab beam etc in/c fitting fixing and striking out after completion of work 25mm to 30mm thick. Wooden shuttering-

Reinforcement for reinforced concrete including binding, bending, cutting etc Complete.JSW/JSPL/SRMB/SHYAM

(E)M.S. or W. I ornamental grill of approved design. Joints continuously welded with M.S./W.I. Flats and bars for windows railing etc. fitted and fixed with necessary screws and lugs & hanging, locking arrangements etc. materials & labour complete in ground floor. Grill weighing 16Kg/Sqm

Plaster (to wall, floor etc.) with sand and cement mortar including rounding of chamfering comers as directed and racking out joints or roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete.(B) 15mm thick plaster with (6:1) cement mortar. At Gr. Floor

C) 10 mm thick cement plaster with (4:1) cement mortar

Neat cement punning in/c all complete as per specification at site

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in- Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra conc

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textered (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC

Protective and Decorative Acrylic exterior emulsion paint of approved qulity, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of prime

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(a)Painting with best quality synthetic enamel paint over a coat of primer of approved make and brand including smoothing surface by sand papering etc including using putty on the surfaces if necessary. [Super gloss(hi-gloss) with any shade except white] (Two Coat).(ii) steel surfaces

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining withjointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. (ii) 110 mm. Dia.

Add 7.5 % for Electrical Work

GST, as applicable @ 18% .

Labour welfare cess @1% .