South Eastern Railway Tender

Execution SOR (Including GST) - Scope of work includes Design of Route Control Chart (RCC), Front Plate Diagram (FPD) and circuits for Panel Interlocking as per approved Signal Interlocking Plan and typical circuit diagram, Trenching, Horizontal Drilling by using manual pushing method, Supply, transportation and fixing of Galvanised Iron Pipe, Supply, transportation and fixing of Galvanised MS trough, Transportation and laying of S&T Cables, Erection of location box, Alteration/modification in existing location boxes, Transportation, installation of 3/4 - Aspect Signal Post, Transportation and fixing of Junction type Route Indicator, Transportation and fixing of Calling 1 ON Signals, Fixing of P/G/C/A/AG/IB Marker/Arrow marker/Signal Number plates, Transportation, erection, fixing, installation and commissioning of Cable Termination rack, Alterations/modifications works on existing relay rack (Q-series/ Composite Relay Racks)/Cable Termination Racks (CTR), Installation, testing and commissioning of track circuit on Point & Crossings, Transportation and installation of Electric point machine, Conventional earthing, Installation of Single Maintenance Free Earth, Execution of Straight joint on Quad cable/ jelly filled Telecom cable using Thermo- shrink/Universal jointing kit (RTSF), Miscellaneous arrangements for NI period, Adjustment, testing and commissioning of complete Interlocking at proposed stations, Cement Concrete of proportion 1:2:4 (Cement: Sand: Stone chips of 20mm nominal size)

Execution Non SOR (Including GST) - Scope of work includes Design, FAT and Submission as planned and as build interface drawing, application logic & equivalent circuits in 2 connection software modification of Kyosan make EI at Abada station, Alteration in existing relay room, Demolishing cement concrete manually/ by mechanical means, Wiring of inputs from Relay to Intermediate Tag block and Intermediate Tag block to data logger equipment for additional data loggers

Supply SOR (Including GST)- Scope of work includes Supply of HDPE pipe with OD/ID 50mm/42mm, Steel Apparatus case Full height, Terminal block 6-way PBT, Non-Deteriorating type low voltage electric fuse, PBT fuse base, Non-metallic (FRP) Colour Light Signal, Housing of various types for Railway Signalling suitable for Four aspect, Cast Iron (Grade-20) Signal base 140 mm diameter, Tubular (Seamless) Post for Colour Light Signal 5.5 meter, Ladder 5.5 meter, Non-metallic (FRP) Colour Light Signal Housings for Junction Route Indicator Unit (4 way), Offset bracket, Metallic A Marker/Calling On signal (CLS Type), Signal Number plate pressure sensitive Retro reflective type, Signal Marker Retro reflective type, Pipe lock with key ring, MS Cable termination Racks (CTR), 2 3 conductor Knife disconnect terminal block, Steel Rail Carrier (Din Rail slotted), Endplate/End stop, Wago Marker ( 1-100) for wago terminal, Negative Bus Bar, 2 conductor Fuse terminal block, Cable PVC Insulated single core multistrand, unsheathed with plain annealed copper conductor 16/0.2 mm , Cable PVC Insulated single core multistrand, unsheathed with plain annealed copper conductor 3/0.75 mm, Cable PVC Insulated single core multistrand, unsheathed with plain annealed copper conductor 7/0.75 mm, 16 Sq. mm PVC insulated Single core Multi-strands copper conductor, 35 Sq. mm PVC insulated Single core Multi-strands copper conductor, DC-DC converter 110/(24 - 32 V, 10A), DC -DC Convertor 110/(66 - 110V or 60 - 100 V , 1A), Track lead Junction Box (TLJB) made of fiber reinforced plastic, Track Feed Battery Charger, Choke Coil, Track Feed Resistance, Wire I.G. 8 SWG, Channel Pins, Insulated galvanized flexible stranded wire, Earth Electrodes, MS Flat Plate Strip, Basic material to construct unit Maintenance Free Earth, Thermo shrink jointing (TSF) kits