Siliguri Jalpaiguri Development Authority Tender

Auditorium Chair, Model : Jupiter Mid Back Chair 2342IX : The seat is made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert measured as per QA method described in OCP-QLTA-P14-18 and is upholstered with fabric. Approx. Seat Size is: Depth: 42.0cm, Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly is flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and is upholstered with fabric and back cover. The insert is made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. Approx; Back-Size is: Height: 65.5cm, Width @ top: 34.5cm. Width @ seat level: 46.0cm. The HR polyurethane foam is moulded with density = 45 +/-2 kg/m3. The back cover and mechanism cover is vacuum formed from black ABS sheets. The Armrest understructure is upholstered PU foam moulded with MS insert. Arm tops is made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width= 7.0 ±0.5cm and is offered as common/individual armrest between chairs. • MS black powder coated (DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not in use. • Footprint area of base plate is made of HR steel15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm thick. • Backrest supporting beam width is-46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. • Understructure fixed to ground by anchors with washer and nut. The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. Overall Dimensions of Chair is Seat Height - 46.5 cm, Height - 89.0 cm, Width & Depth of Chair Width(w1)-60.0cm(individual), width(W2) - 53.0 cm.(common arm) and Depth-69.0 cm.(normal) , Depth(D2)- 54.0(seat folded). All Godrej metal parts are pre treated with 6 steps of Degreasing, Water Rinse, Phosphating and Passivation and the Powder coating is done following 7 Tank spray phosphating system which is followed by Oven drying at 140º C EMT after Pretreatment Camel Hump Oven for baking powder at 180º C and in-built cooling loop after Oven baking. Godrej has in house quality checking, steel processing and powder coating units. Godrej has the International Member Certificate of BIFMA for more than 25 years along with products certifications like: BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates include ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, OHSAS 18001:2007. Godrej also have Green Guard Certification for few of its products. All the ISO certificates are obtained from NABCB (Central Govt) accredited organization. Godrej has Sales & Service set up across all districts. Item rate has been determined by including all the taxes.