Rabindra Bharati University Tender

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) at Baranagar Boys Hostel.

Supply & Fixing Socket type fan regulator (Step type)(Anchor approved by EIC) on existing sheet metal switchboard with bakelite/perspex top cover by screw aftermaking housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections at Baranagar Boys Hostel.

S& Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip)Wire, making holes etc. as necy. mending good damages and painting from shramik vidyapith pump room to TPN a) 4 core 16 sqmm PVC/A aluminium cable (Gloster/Havells) from panel to PBDB

b) 2 core 10 sqmm PVC/A aluminium cable from PBDB to BDB

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. With A DP Isolator & 10 Nos SPMCB 2+12 way Havells /Legrant/ L&T make

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with 63A FP Isolator & 12 nos 32A SPMCB Legrant/Havells/L&T make concealed in wall Gr floor to 3rd floor

Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (fenolex/Havellsapproved by EIC) in 20mm size PVC casing capping 'FR'(Precision make) incl. necy. Fittings as required. a) 2 x 2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

b) 2 x 4.0 sqmm) + 1 x 2.5 sqmm) ECC

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch ((Anchor approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting 250 x 250 x 100mm

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2 Way S& fixing 240V 32A MCB Havells of Breaking capacity 10kA & C characteristics existing DBs and necessary connection

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. a) 4 core 16 sqmm PVC/A aluminium cable.

b) 2 core 10 sqmm PVC/A aluminium cable

Supplying and fixing 415V, 63A TPN L&T make SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse for pump at Baranagar Hostel

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By ISI-Medium GI pipe

S& Laying of cable as below, after cutting floor/pavement/wall/& making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. a) 4 core 16 sqmm PVC/A aluminium cable (Gloster/Havells) from panel to PBDB

b) 2 core 10 sqmm PVC/A aluminium cable from PBDB to BDB

S&Fsingle LED light fitting Philips make TMC 501 mounting rail model no. TMC 501 with 1XT LED 18 W philips with all accessories directly ceiling/wall with clamp and suitable size of fastener or Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl.S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required as per EIC

S&F twin LED light fitting Philips make TMC 501 mounting rail model no. TMC 501 with 2 XT LED 18 W philips with all accessories directly ceiling/wall with clamp and suitable size of fastener or Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required as per EIC

S&F summer cool/new Breeze ceiling fan orient make ceiling fan (Brown ) completeWith all blades , regulator , approved paint….making necessary connection as reqd. a) 56”(1400 mm sweep) ceiling fan

b) 48”(1200 mm sweep) ceiling fan

S& Fixing 230V AC 450mm sweep 1325 rpm orient make cat no. TORNADO WALL II cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

S&Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection incl louver shutter with necy bolts & nuts for exhaust &Fixing only louver shutter/cowl on wall with necy.(6 mm dia x 62 mm long) nuts & Bolts a)9"exhaust fan 1370 rpm EPC make at toilet 1st floor to 3 rd floor

b)18 "exhaust fan 1400 rpm EPC make at toilet Gr floor of Baranagar hostel

S&Fixing outdoor luminaires green line cat no BRP409LED 074CWHEMRFGSTPSU GR Philips make ………………………complete with all accessories to be ixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting roof of Baranagar boys hostel

Supplying installation testing and Commissioning suitable size of L.T cubical Panel board floor mounting type by ( 14/16SWG )M.S sheet ( front and top should be 14 SWG and others 16SWG ) and suitable size of M.S angle & channel as necessary 3 phase 4 wire 400A capacity copper busbar consisting of 3 nos 40mmX 6mm and 1no.25 mmX 6mm copper bar duly tinned and proper insulated fixed on Bakelite Insulator.All the Interconnection should be made by suitable Size of insulated copper flat /rod and for meter Selectorswitch indicator lamp etc interconnection by fenolex copper wire with Proper socketing .Cubical should be complete with two coats of powder coated paints over one coats of R.O primer all the doors should be Provided with proper synthetic gasketing. Drawing & Design will be appd. by E.I.C. before Fabricating the cubical.(incl masonary work) 1) INCOMING SWITCH Supplying and fixing 415V, 200A TPN SFU L& T make open execution in the cubical with nuts bolts etc incl. S&F3 nos. DIN type HRC fuse (Cat No.) 1 No. 2) OUTGOING SWITCH Supplying and fixing 415V, 63A TPN SFU L& T make open execution in the cubical with nuts bolts etc incl. S&F3 nos. DIN type HRC fuse - 8 nos. 3) a) 0-500V Voltmeter ( AE ) with selector Switch and slide lock fuse-01 no. b) 0-200 A ammeter ( AE ) CT operated with Selector switch one number c) 200/ 5 C.T ( kappa ) –03 nos. d) Neon indicator LED lamp with slide lock fuse- 03 nos.