Public Works Roads Department Tender

Supplyind & providing and laying bituminous macadam with Mobile Hot Mix Plant (Light Duty) using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature by means of approved and suitable arrangements to the required grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Specifications for Road & Bridge Works of MoRT&H (5th Revision). Excluding cost of applying tack coat. For Grading 2 (19 mm nominal size, 50-75 mm thick.) Tentative stone materials required per m³ of compacted volume: 22.4 mm size chips @ 0.4241 m³/m³, 13.2 mm size chips @ 0.2827 m³/m³, 11.2mm size chips @ 0.3534 m³/m³, 5.6mm size chips @ 0.2121 m³/m³, stone dust with grit @ 0.1414m³/m³ & Bulk bitumen (VG-30 bulk) @ 75.00 Kg./m³

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.

Furnishing and Placing Reinforced / Pre-stressed Cement concrete in Super-structure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technical specifications. RCC Grade M25 Using Concrete Mixer For solid slab super-structure, Height upto 5m