Public Works Roads Department Tender

Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).II By manual Means with Hot Bitumen Binder(VG-30 Packed)(@ 6.80 kg/ 10 sqm.)

Patch repair on already filled pot holes with BM with 20 mm premix carpet and seal coat Type B as per drawings and technical specification Clause 1904.2 for Rural Roads of MORD.(including Tack Coat with CBE(MS Type)@ 0.25 kg/m2 and aggregates with Stacking.)

Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and technical specifications Clause 1902 for Rural Roads of MORD.

Dressing and chilchalling Road flanks including cutting and filling with earth up to 150 mm average thickness finished with outward cross-grade of 1 in 30.

Protective work with walling with eucalyptus Bullah 1.5 m(av) high on pilling 150 mm dia and 4.50 m long driven 3.00 m(av)below G.L and 350 mm centre to centre including fitting fixing 3 nos. of half bullah pieces(from 10 cm dia) including cost of necessary nails, bolts, nuts etc. and providing 2 to 3 m long half bullah tiesw of 10 cm dia @ 2.25 m centre to centre fixed with 10 cm dia bullah posts driven 1.5 m below G.L including cost of all materials and one coat of coal tarring to all bullah etc complete as per direction of E.I.C

Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags.

Goods and Services Tax(GST)@18%

Labour Welfare Cess(LWC)@1%