Public Works Roads Department Tender

Supplying, spreading and compacting Sand to required thickness, in layers not exceeding 150 mm to proper gradient and camber, inundating each layer by water and packing and ramming layer by layer to achieve desired compaction, including lighting, guarding, barricading and making adequate earthen bundh where necessary, curing with water as per direction, mending cracks and depressions by ramming wherever necessary. Using Silver Sand. The compaction factor for dry clean Silver Sand may be taken as 0.835.

Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with Concrete Grade as specified as per Table 1 of IS 15658:2006) manufactured from BIS licensee manufacturer, with spacer nib (Small protruding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. No 3.26 of IS: 15658) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per Cl. No. 3.3 of IS: 15658) as per Table 2 of IS:15658 with flexural strength/ breaking load as per Annexure G of IS: 15658 on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joint filling sand (the completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP – 63 (2018) with proper confinement of bedding and joint filling sand, compaction, leveling and filling up of the edge gap. 60 mm thick. Coloured Decorative.

GST @ 18.00% over Sl. No. 1 to Sl. No. 5

LWC @ 1.00% over Sl. No. 1 to Sl. No. 6