Public Works Roads Department Tender

Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed. (a) By manual means : (ii) From 50 mm to 100 mm thick.

Dense Bituminous Macadam Providing and laying dense bituminous macadam with Hot Mix Plant using crushed aggregate of specified grading, filler(Cement /hydrated lime / Rock dust) premixed with bituminous binder of approved grade VG-30 (Bulk) @4.0% (min) for Grading -1 and 4.5% (min) for Grading -2 by weight of total mix as per table 500-1 O and mix design done as per table 500-11 and job mix formula as per clause 505.3.3 of MoRT&H (5th Revision), including screening, cleaning of chips , transporting the hot mix to work site, laying the mixed materials at specified layfng temperature, as specified In Table 500-2 with o hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tack coat with CBE (RS-1 Type) @ 0.25kg/m2 rolling with smooth wheeled and vibratory or tandem rollers or with a pneumatic tyre roller of 12 to 15 tonne weight with a tyre pressure of at least 0.56 MPa, to achieve the desired density as per clause 505.3.5, all includlng cost and carriage of bitumen, crushed aggregates, filler materials and hire charges of machinery and equipment for construction ond quality control complete as per Clause 505 of Specifications for Rood & Bridge Works of MoRT&H (5th Revision). B. For Grading 2 (26.5 mm nominal size, 50-75 mm thick.) (i) Using Batch Type HMP of minimum capacity 100-120 TPH.

Bituminous Concrete Providing and laying bituminous concrete with Hot Mix Plant using crushed aggregates, filler materials (Cement /hydrated lime /Rock dust) and premixed with bituminous binder of specified grading VG-30 (Bulk) @5. 2% (min) for Gr.-1 & @5.4% (min) for Gr.-2 , as per table 500-17 and mix design done as per table 500-10 and job mix formula as per cl. 505.3.3, including screening, cleaning of chips and preparing a uniform and quality mix, transporting the hot mix to work site, laying the mixed materials at specified Joying temperature as specified In Table 500-2 with a hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tack coat CBE (RS-1 Type) @ 0.25kg/m2 rolling with smooth wheeled and vibratory or tandem rollers or with a pneumatic tyre roller of 12 to 15 tonne weight with a tyre pressure ol at least 0.56 MPa, to achieve the desired density as per clause 505.3.5, including cost and carriage of bitumen, crushed aggregates, filler materials and hire charges of machinery ond equipment for construction and quality control, complete os per Clause 507 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). B. For Grading 2 (13.2 mm nominal size, 30mm/40 mm thick.) (i) Using Batch Type HMP of minimum capacity 100-120 TPH.