Public Works Roads Department Tender

Granular Sub-base with Graded Material (Table:- 400-1) B. By Mix in Place Method : Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). Grading - V

Granular Sub-base with Graded Material (Table:- 400-1) B. By Mix in Place Method : Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). Grading - III

Wet Mix Macadam Base Course Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

Primer Coat Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) For WBM / WMM Surface: (with CBE-SS1 @ 0.85 kg/ sqm)

Providing and laying Dense bituminous macadam with Hot Mix Plant using crushed pakur variety aggregate of specified grading, filler(Cement/ hydrated lime/ Rock dust) premixed with bituminous binder( VG-30 Bulk) of approved grade @ 4.50%(min) for Grading 2 by wight of total mix as per table 500-10 and mix design done as per table 500-11 and job mix formula as per clause 505.3.3 of MoRT&H(5th Revision), including screening, cleaning of chips, transporting the hot mix to work site, laying the mixed materials at specified laying temperature, as specified in table 500-2 with a hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tack coat @0.275kg/m2 (RS-1) rolling with smooth wheeled and vibratory or tandem roller or with a pneumatic of at least 0.56 ) Mpa, to achieve the desired density as per clause 505.3.5 all including cost and carriage of bitumen, crushed aggregates, filler materials and hire charges of machinery and equipment for construction and quality control complete as per clause 505 of specifications for Road and Bridge works of MoRT&H (5th Revision). For Grading 2 (26.5 mm nominal size, 50-75 mm thick.) Using Batch Type HMP of minimum capacity 100-120 TPH.

Providing and laying Bituminous concrete with Hot Mix Plant using crushed aggregates, filler materials (Cement/ hydrated lime/ Rock dust) premixed with bituminous binder(VG-30 Bulk) of approved grade @ 5.40%(min) for Grading 2 by wight of total mix as per table 500-17 and mix design done as per table 500-10 and job mix formula as per clause 505.3.3 of MoRT&H(5th Revision), including screening, cleaning of chips, transporting the hot mix to work site, laying the mixed materials at specified laying temperature, as specified in table 500-2 with a hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tack coat @0.25kg/m2(RS-1) rolling with smooth wheeled and vibratory or tandem rollers or with a pneumatic of at least 0.56 Mpa, to achieve the desired density as per clause 505.3.5 all including cost and carriage of bitumen, crushed aggregates, filler materials and hire charges of machinery and equipment for construction and quality control complete as per clause 505 of specifications for Road and Bridge works of MoRT&H (5th Revision). For Grading 2 (13.2 mm nominal size.) Using Batch Type HMP of minimum capacity 100-120 TPH.

Plain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications. F. PCC Grade M40 (i) Height upto 5m I) Using concrete mixer

Supplying and laying in the specified pattern of interlocking Concrete Block Pavements (ICBP) with Concrete Blocks (With concrete grade as specified as per Table-1 of IS 15658: 2006) manufactured in steel mould clamped to a vibrating table by hydraulic pressure (as per cl. no. 6.30 of IRC: SP 63(2018), from BIS licensee manufacturer, with spacer nib (small protuding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per cl. no. 3.26 of IS:15658) and of specified size and shape with spect ratio( The ratio of length to thickness of a paver block, as per clause cl. no. 3.3 of IS : 15658) as per table 2 of IS: 15658 with flexural strength/breaking load as per annexure G of IS: 15658, on the prepared base course of specified CBR as per Table1 of IRC SP 63(2018) or else as mentioned in deisgn and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and fillings up the gaps in between paver blocks with joint filling sand(the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP-63(2018) with proper confinement of bedding and joint filling sand, compacting, levelling and filling up of the edge gap. 100 mm thick. Grey colour.

Goods and Services Tax(GST)@18%

Labour Welfare Cess(LWC)@1%