Public Works Roads Department Tender

Patch repair on already filled pot holes with BM with 20 mm premix carpet and seal coat Type B as per drawings and technical specification Clause 1904.2 for Rural Roads of MORD.[inlcuding Tack Coat with CBE (RS-1) @ 0.25kg/m2 and aggregates with Stacking]

Repair to pot holes by removal of failed material, trimming the sides to vertical and leveling the bottom, cleaning the same with compressed air or any appropriate method filled with B.M (thickness not more than 75 mm in single layer) applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom @ 0.25kg/m2 (RS-1 Type) as per technical specifications Clauses 502 and 503 for Rural Roads of MORD. (Payment to the contractor is to be made on the basis of finished compacted volume of potholes) (Using VG-30 (Packed) Bitumen @ 75kg/m3) for mix and aggregates with stacking)

Providing and laying Premixed Seal Coat (Type B) with approved quality stone/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder (VG-30 Packed) and aggregates with stacking cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).II By Manual Means With Hot Bitumen Binder (VG-30 Packed) (@ 6.80 kg / 10 sqm.)

Goods and Services Tax(GST)@18%

Labour Welfare Cess(LWC)@1%