Public Works Roads Department Tender

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement offinished quantity)

Granular Sub-base with Graded Material (Table:- 400-1) B. By Mix in Place Method : Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). width of laying is not adequate for mechanical operation or in case of small sized jobs, suitable mixing and spreading equipment capable of mixing the material to the desired degree and spreading -the mixed materials uniformly according to required line and level to the satisfaction of E-in-C may be approved by the Engineer-in-charge ' i) Grading – III with Pakur variety aggregate 26.50 mm Size aggregates 0.448 Cum/cum 5.60 mm Size aggregate 0.576 Cum/cum Sand (Medium) 0.256 Cum/cum [With Stacking]

(ii) Grading – V with Pakur variety aggregate 37.5 mm Size aggregates 0.256 Cum/cum 22.40 mm Size aggregate 0.256 Cum/cum 11.20 mm Size aggregate 0.192 Cum/cum 5.60 mm Size aggregate 0.320 Cum/cum Sand (Medium) 0.256 Cum/cum [With Stacking]

Supplying & laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with Concrete grade as specified as per Table-1 of IS 15658:2006) manufactured from BIS license manufacturer, with spacer (Small protruding profiles on the vertical face of a paver block used as a device of keeping minimum joint gap in between the paving blocks, as per Cl. No 3.26 of IS: 15658) and of specified size and shape aspect ratio (the ratio of length to thickness of a paver block, as per Cl.No.3.3 of IS: 15658 with flexutal strength/breaking loadd as per Annexure G of IS:15658, on the prepared base course of specified CBR as per Table-1 of IRC SP-63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP-63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP-63 (2018) with proper confinement of bedding and joints filling sand , compaction, levelling and fillling up of the edges gap. 60 mm thick. ' (i) Grey

(ii) Colour Decorative

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross-drain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.(b) Where staging is not required.

Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m, Tor steel/Mild Steel ' SAIL/ TATA/RINL.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 15 mm thick plaster (1:4)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor: Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) Normal Acrylic Emulsion

Add GST@18% on Rs. 2281837.56 i.e. total amount over item no1 to 13

Add Labour Welfare Cess @1% of Rs.2692568.32 i.e. total amount of Item No. 1 to 14