Public Works Roads Department Tender

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). RCC Grade M25

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved (c) Steel shuttering or 9 to 12 mm thick approved // quality ply board shuttering in any concrete work

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length,etc.(SAIL/TATA/RINL).

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (ii) 20 mm dia bolt (a) 300 mm long

Drilling holes of requisite diameter in R.S. joists channels, tees. Plates etc (b) (I) Dia.above 12mm and depth upto 10 mm.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. III) For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m(It-1, P-84)

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (It-1, P-200)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (b) On steel or other metal surface (iv) Two coats (with any shade except white) (It-2, P-200)

Providing Direction and Place Identification Signs with size more than 0.9 sqm size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75mmx75mmx6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60cm, 60cm below ground level as per approved drawing (Reference to MORT&H's specification 801).Note: Lettering and arrow marks on sign board to be provided separately as per actual requirement. Rates for these items have been analysed separately.Cost of all material included. Only the cost of material for M-15 grade conc. to be added as per chap. A Sl No..8.6.

Supplying & fixing of Hazard Markers of size:30 cm X 90 cm as per IRC:79-1981 (The above is inclusive of vertical post)

Providing and fixing of retroreflectorisedcautionary,mandatoryand informatory signasper IRC:67madeof highintensitygradesheetingvideclause 801.3, fixed over aluminiumsheeting, 1.5mmthick,whensignswithmaximum sidedimensionsdonotexceed600mm ,orwithaluminiumsheeting2.0mmthick when signs with maximum side dimensionsexceeds600mm, supportedonamildsteelangleironpost75mmx 75 mm x 6 mm firmly fixed to the groundbymeans of properly designed foundation with M15 grade cement concrete45cmx45cmx60cm,60c below ground level as per approved drawing (Reference to MORT&H's specification 801). 60 cm circular

GST @ 18%