Public Works Roads Department Tender

Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty); Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same using viscosity grade paving bitumen (VG-30) @1.46Kg/m2, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD. [Rate is inclusive of tack coat @0.25 kg/m2]

Seal Coat: Providing and laying Premixed Seal Coat (Type B) with approved quality stone grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface, including heating and mixing cleaned stone grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). By Manual Means With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.). Over freshly laid 20 mm P.C.

Hire and labour charges for 100mm dia bamboo railing on 150mm dia Jhau/Eucalyptus or other approved timber 1.4 m above G.L. and 0.60 m below G.L. including tying strongly with coir ropes and boring holes for posts in any soil /black top/concrete surface, packing the sides etc. including cost of carriage of all materials and labour complete and maintaining barricading for a period beyond 5(five) days after the reported & recorded time of completion of the entire work to the satisfaction of Engineer-in-Charge, including restoration to the damages of the ground to its original condition as per direction of Engineer-in -Charge after removing the barricade. [Cost of restoration will be paid separately.] 100 mm. dia bamboo railing & 150mm. Dia Jhau/Eucalyptus/other approved timber posts @ 1.80m apart : Railing with 4 rows.

Earthwork in excavation from borrow pits (landowned/arranged by the Department) and depositing in layers of 250 mm. including breaking clods in embankment works and to fill up back of abutments, depressions and ruts with an initial lead up to 50 m and initial lift up to 1.5 m making bunds at top as directed dressing complete. (Borrow pit measurement) In ordinary soil

Supply of Male Mazdoor with bucket,axe,shovel for emergent petty works.

Supplying silver sand stacked at site.

GST @ 12.00% over Sl. No. 1 to Sl. No. 9

LWC @ 1.00% over Sl. No. 1 to Sl. No. 10