Public Works Department Tender

Rough dressed timber planks fitted and fixed with nut bolts excluding framework complete : In ground floor. i) 35mm thick planks a) Sal local.

Ceiling with 12m thick wooden planks fitted and fixed complete (excluding the supporting framewrk) as per direction of the Engineer-in-charge. In Ground flor a) Sishu/Chmap / Badam Gamar Bhla MgeraHallak.

Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.. i) 66mmx90mm

Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.. i) 32m thick.

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) a) 40x6mm, 250 mm length.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark i) 75mmx40mmx1.12mm.

Anodised aluminium barreltowersocket bolt (full covered) of approved manufactured from extruded section conforming to I.S 20474 fitted and fixed with cadmium plated screws : i) 75mm long x10mm dia. Bolt.

Andised aliminium D-type handle of approved quality manufctured from extruded section conforming to I.S specification (I.S 23072) fitted and fixed complete : a) with continuous plate base (HexagonalRound rod) i) 75mm grip x 10mm dia rod.

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) a) Upto area 2.5 sq.m

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868- 1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 kg per Mtr. and for shutter Btotom and Top member @ 0.472 kg per mtr, style side member @ 0.493 kg per Mtr. and Interlock member @ 0.612 kg per Mtr. (Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 kg per Sq.M and 3-track Aluminium window @ 6.5 kg per sq.m)

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 i) 5mm thick clear glass.

M.S or W.I ornamental grill of approved design joints continuously welded with M.S, W.I Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor i) Grill weighing above 10 kgsq.mtr and up to 16 kgsq.mtr.

Supplying best Indian sheet glas panes set in putty (as per I.S specifiction) and fitted and fixed with teak wood beads and nails complete (In all floors for internal wall & upto 6m height fr external wall i) 4mm thick.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] i) with 1:4 cement mortar 20mm thick plaster.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc. including using of approved putty etc. on the surfaces, if necessary a) On steel or other metal surface : With super gloss (Hi-gloss) i) Two coats (with any shade except white)

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc. including using of approved putty etc. on the surfaces, if necessary a) On steel or other metal surface : With super gloss (Hi-gloss) i) Two coats (white in shade)

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-charge. (excluding the cost of supporting frame work and teak wood battenLipping) In ground floor i) 19mm

Acrylic distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. A) Two coats.

Stopping roof leakages in C.I or G.C.I or asbestos roofing i) with limpet and bitumen wasehr and putty.

Taking out carefully G.C.I or C.I or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc. and stacking the material at site as directed.

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) a) with 0.63mm thick sheet.

Supply, fitting and fixing E.W.C in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. a) With "S" Trap.

Supplying fitting and fixing Closet seat of approved make with lid and C.P hinges, rubber buffer and brass screws complete a) E.W.C i) Plastic (hallow type) white.

Supplying fitting and fixing 10 litre PVC low -down cistern conforming to I.S specification with PVC fittings complete, C.I brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. a) For exposed work i) CPVC Pipes Class-1, SDR-1115 mm

Supplying fitting and fixing bib cock or stop cock i) Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model- Florentine of Jaquar or similar brand.

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mmx75mmx75mm wooden blocks. Complete i) 470mmx280mmx340mm.

Supplying, fitting and fixing approved brand 32mm dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps i) 1050mm long.

Add 18% GST

Add 1% Cess